My numbers application will not continue an update and will not open due to said incomplete update
My numbers application will not continue an update and will not open due to said incomplete update
open the application "LaunchPad" then locate Numbers. Click and hold on Numbers until is starts to shake. click the "X" in the top left corner. click on the desktop to exit this mode. Now open the App store and install again.
Similar Messages
-
After an auto update firefox will not open due to an incomplete update
firefox performed an automatic update 4 days ago. It is 3.6 version. once the browser closed it refuses to reopen-message reads you must restart firefox-update was incomplete. When you restart and try to open the browser-you get the same message. If you try to uninstall-you get the same message. Nothing works
Remove the files and folders to reset the software update feature as shown here http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly
Delete the Firefox installation directory, default location C:\Program Files\Mozilla Firefox\
Download the setup file from http://www.mozilla.com and run it to re-install. Doing this will not remove your bookmarks or other user data. -
When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
== This happened ==
Every time Firefox openedIf you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation. -
My phone 5s 16gb gold did the new update and will not come back on. I already tried hard reboot still won't work. Been over a hour now. Please someone help I need my phone. This phone is not even 6 months old been in case no scratches. This is driving me crazy.
Connect your phone to a computer and restore your software using iTunes.
-
Yesterday I decided to finally update my iphone 4S to the latest operating system 7. It asked me for a password when upgrading but now does not recognize the password and will not let me in. FRUSTRATED. What do i do????
Hi Rachel,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy -
when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?
All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
Cheers, Tom -
IPhone 5
I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app - tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP
Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.
Troubleshoot the spinning beach ball -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
HT5958 Existing projects will not update and are not available for Final Cut Pro 10.1.1?
I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?
In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ -
I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.
Lloyd Northover wrote:
I have gone out of my way to buy an iPad 2 and you're telling me that I cannot have Siri, as you know iPad's are expensive, and you'd expect the newest updated whenever available. I am not a happy customer and will not but from Apple again.
If you want to use the "newest updated whatever available." then you would have to buy the newest hardware that supports that. iPad 2 is not the newest hardware available and it can't/does not support siri. -
LR 4 - image does not appear in Preview and will not print`
The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?
The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
Re: LR 4 - image does not appear in Preview and will not print`
created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
After the last update of IOS5.1.1, all caledar entries are not saved on Icloud and thus not synced on all my Icloud devices, even though, spreadsheets are synced, photostream is working and contacts is syncing, only calendar items. Anybody has the same problem? Or a solution to this kind or problem?
Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings. -
Firefox will not ''start'' and open a website from a Thunderbird email link. A link from Thunderbird will open once Firefox is ''already'' started, but will not initially start Firefox and proceed to open the Thunderbird email link.
I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005 -
My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?
Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom
Maybe you are looking for
-
Updating a JLabel Too Fast Crashes Program
I have a recursive method that runs for 80 seconds (in a thread outside the GUI). The recursive method is probably being called 20,000 times in this 80 seconds. I am calling myJlabel.setText("" + someVariable) every call to this recursive method. Abo
-
It says I haven't purchased lion osx and I have
I recently deleted my software to do a hard reset on my mac book air and when I went to reinstall it, it tells me that I haven't bought it and to use an Apple ID that I've bought it with so I bought the software again and now it's telling me I still
-
How do I move past the terms and agreement page of the update? I have clicked agree for every catagory about 8,000 times and it won't move me forward or give me any kind of error message.
-
Add to chart button in personalized mail
Hi, Can anybody give me suggestion on how to insert an Add to chart button in a personalized html mail. There need to be functionality behind so that the customer are logged in when he presses the button. Thanks in advance. Regards Camilla
-
Dear All, I am trying to check WBS Element (COBL-PS_POSID) by user exit - MV45AFZZ, it is successful by using xvbap-ps_psp_pnr in FORM USEREXIT_SAVE_DOCUMENT_PREPARE. VA01/02 -> goto Item -> Account assignment -> WBS Element However, user can also us