My Numbers-program is blocked I can't use and can'tt close it

Dear Apple Support Communities
Thank you for your support.
Now the program is not blocked more . I can create new spread sheets, work in them and save them, but I can't enter the old and work on them.
When I, as advised, copy them to work on the copy, it is not possible to write in the copy.
Another mystery : Now I can't send a file from desktop to the recycle bin. It am asked for password and I give it it . But the file remains on the desktop.
Kind regard
Svend Aage Rasmussen

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked
Allow user to administer this computer
Then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Similar Messages

  • ITunes will not shut off. Since I upgraded the software, itunes opens no matter what program I am using and when I close it , it will just reopen over whatever I am using.  this is very annoying!!!!

    iTunes will not shut off.  Since I upgraded my software, itunes opens no matter what program I am trying to use.  If I close it it automatically opens moments later and interferes with what I am working on. This is so annoying

    This is probably occuring because your Mac is attempting to wirelessly sync with a device. Try unchecking the checkbox that reads "Open iTunes when device is connected" (this option can be found under the general page of iTunes when you have a device connected).

  • I have a mac os 10.6 when I try to update firefox from 3.6 it says its still being used and won"t close it so I can install the upgrade..What can I do?

    I can't get the old version to quit so that I can install the newer firefox update...what can I do because I keep crashing! What am I doing wrong?, I've tried probably ten or more times.

    If this does not work:
    [http://support.mozilla.com/en-US/kb/Updating%20Firefox Updating Firefox]
    try download firefox from here:
    http://www.mozilla.org/en-US/firefox/all.html
    and follow the instructions:
    [https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • I am required to delete the file parent.lock but when i try delete it, it says its already in use and when i close firefox it dissapears and i can't find it to delete it. I tried a file unlocker and it says the same, so how do i delete it?

    I have all files visible from control panel i am running windows 7 home premium.

    That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

  • I can't close my firefox not excel or the apple system

    My three buttons from close, minimized & maximized do not appear... its really weird.
    I was using excel & I put alt shift enter for a formula & now my whole system is blocked & I can't close any program.
    The firefox appears on the screen but I can quit the application, help me please.

    Hello there, you have posed to the applescript discussions.
    If you are using 10.4 (Tiger) can I recommend you post here:
    http://discussions.apple.com/forum.jspa?forumID=758
    You could try force quit (hold down command-option-enter) and choose the programs that are unresponsive.
    Or you could hold down your power key for some time, and you machine will power down (yes you have lost your work)

  • How can I keep my child from UNBLOCKING contacts or numbers I have blocked? I know in restrictions when you disable account changes at least on ios 6,this greyed out the iMessage button so the kids couldn't deactivate their text feature.

    Here's the issue.  Kids got themselves into some trouble on iPods.  We set all restrictions any turned off iMessage etc, which I noticed they can't turn back on bc it's gray with the don't allow account changes set.  BUT, it still allows Wi-Fi to be turned on and off!  How can I disable them being able to turn that on wo asking me??  In ios 7, the blocking feature, fabulous, BUT, how can I keep the kids from UNBLOCKING numbers I have blocked?  What I am looking to do actually is allow my kids to be able to text family but block everyone else.  And ask me to turn on wi fi.  How and can this even be done?  Right now my d text is turned off completely.  And she knows the inside and out of her device so she can turn wi fi on herself.  On vacation she entered the wi fi code of our condo and so I did forget network, which didn't work and wi fi kept connecting anyway wo requiring password again!  HELP!  Thanks :)  Also, they have iPods now but am asking these questions based on them getting our 4s's with ios 7.

    TeresaBoo, I empathize with your dilemma and have a similar problem. I'm trying desperately to keep my teenage daughter away from a controlling and abusive boyfriend. Of course, she is in denial and thinks it's love. Sure, I can block text messages through our wireless provider, but iMessages run on an independent network. I can block a phone number from iMessaging on her phone, but she can unblock it just as easily. I wish there was some way for parents to create a password to protect settings. Don't let negative comments get you down. Honestly, if someone can't relate to your question or offer help, why are they even bothering to comment??

  • My Numbers program changed yesterday while I was working on a document and now I can't open it.  I get a message telling me I need a newer version to open the document.  All the others seem to open OK.  I HAVE NOT PURCHASED THE NEW VERSION.  What happened

    OK, this is the first time I have used this so I may not have started correctly, so here goes another try. I opened a Numbers Document and noticed the presentation was different from when I worked it before.  Since there have been a number of auto updates since I had worked in Numbers, I assumed I had an updated program.  I found it hard to figure out so I closed the document and went on to other things.  When I went back to it I found a message saying I needed a newer version of the program to open it.  Fortunately, the document was backed up and when I opened the backup it came in my familiar form.  I have not purchased the new version of Numbers but suspect that is what was using for that brief period yesterday.  Anyone know haw that happened?

    Hi Sailor,
    It is pretty amazing you got a new version without even knowing it.
    In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
    If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better.  For most day-to-day uses in between it's a toss-up.  The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
    For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
    SG

  • Can numbers be blocked from receiving text messages and calls?

    can phone numbers be blocked from receiving text messages and/or calls on IPhone?

    You have to check with your carrier. I know Verizon you can log in and block calls.
    You can not selectively do this on the phone.

  • Program keeps blocking signing in to email. Can sign in through web

    Thunderbird was working perfectly. Suddenly I started getting messages that there was unauthorized use. Then it kept blocking me from signing in even though I went to google and changed the password 2x. I still can't get email to one account that I have on a PC and a Mac. The program keeps asking me for a password and then tells me to go to the web for that account. I can log in to the gmail account just fine on the web with the new password. The gmail notices of password changes keep going to my recovery email. I have done a complete scan of the computer and hopefully cleaned anything bad off of it. I have listed my personal email on this request as I am unable to access the one in question at this time. Thank you.

    https://support.google.com/accounts/answer/6009563?hl=en

  • Can i see a list of prior numbers I have blocked?

    I blocked a number by using my i phone, then unblocked it. I didnt write down the number first and now I cant find the number anywhere. It doesnt show on my phone bill because it was a series of imessages that were deleteda and the number blocked.

    Why are my blocked numbers able to leave a voicemail message but their number does not show up on my bill?
    I blocked a phone number that was constantly calling me.  Now it is constantly leaving voicemails in my blocked voicemail call list.  I have to delete the messages because my voicemail is at 100% full. 
    I am trying to pull my AT&T bill so I can see the frequency of the number calling everyday and the amount of messages it left.  However, the number is not any where in the last 6 months of phone records.
    Does anyone know how I can track the blocked number call history???
    PLEASE HELP!

  • I have been trying to log onto the Wounded Warriors Program Portal.  I can Log in and then when I click on the rewards it tried to go to the page the just takes me back to the same page I was on.  This is very frustrating.

    I have been trying to log onto the Wounded Warriors Program Portal.  I can Log in and then when I click on the rewards it tried to go to the page the just takes me back to the same page I was on.  This is very frustrating.  I am new to the Mac World so please bare with me.  Please tell me there is help somewhere for this issue.  It seems it is blocked or not letting me through.  Can anyone please help me out.  Thanks 

    Both Mail and Safari have Activity Options that open a  screen that shows you just how the site or mail is loading.
    In Safari if you are having trouble with a site in activity you will see the count of items being downloaded - and if an error occurs it shows red.
    On the top is the number of items it is loading or trying to load and the count should be increasing.   If the count stops, and you don't have errors it may be that too many people are going after the same site and your request just timed out. Have had the time out on a news site when trying to load a most popular article.

  • Error in BDC program for Block vendor in SAP R/3

    Hello friends,
    I wrote a BDC program to block vendor using FK02.
    When I debug the program in <b>No screen</b> mode
    the program gives a error 'No batch input data for screen SAPMSSY3 0131.
    But the screen name and screen number is not available in the program.
    When I execute without debugging  in No screen mode, the program works correctly.
    When I run in ALL screen mode, the program works correctly and the program does not prompt for SAPMSSY3 0131 screen.
    Is there any solution for this problem.

    check this
    ... MODE mode
    Effect
    The processing mode can take the following values:
    'A' Display screen
    'E' Display only if an error occurs
    'N' Do not display
    <b>'P' Do not display; debugging possible</b>
    If the MODE addition is omitted, then the processing mode is 'A'.
    If a screen is displayed in processing mode 'E' because the system reached the end of the BDC data, the system automatically switches to processing mode 'A'.
    If breakpoints are set in a transaction tcod called using the CALL TRANSACTION tcod USING itab variant, these are not actually reached in 'N' mode. The system tries to insert data in the Debugger screen; the call ends with SY-SUBRC = 1001 and the message "Batch input data is not available for screen SAPMSSY3 0131" (S 00 344).
    Conversely, in 'P' mode, transaction screens are processed in the background (as in 'N' mode) and debugging is possible.
    Regards
    Prabhu

  • "This program is blocked by group policy"

    Hi all.
    I have searched Google a fair bit on this but shockingly I just can't find an actual answer.  The Group Policy forum is where I should have started rather than finally come to :)
    I am no genius with GP, I use it in the most basic ways in very small orgs.  My users appear to all have the same problem, when they insert a removable media device that has software on it that might run or autorun, I get the "This program
    is blocked by group policy, contact your admin" message.  I don't believe this ccurs with removable media just as just plain USB storage sticks.  So far the two examples I know of are for an Internet providers USB broadband mobility stick, and
    another user that is using some Kodak products (SD card, camera, and even the Kodak CD I think). 
    Environment is 2008 R2, Win7 Pro workstations, all users are local admin on their machine.  All users are in the default Users container, and all computers are in the Computer container.  To my recollection I have never set a GPO that would directly
    or indirectly cause all users problems like this.  The only thing that has had indirect consequences that I know of in the past, was because we use many of the options available under Folder Redirection, including redirecting the Desktop.  In some
    cases, when a user has tried to launch an exe or what not that was on the desktop, it failed because it's trying to launch in truth on their user folder on the server, not really on the Windows Desktop.  I'm not sure if that might impact my current problem. 
    To start, where can I go to actually check GPO's for this?  Is this the Software Restriction Policy?  If so, which one governs, the one in User Configuration or Copmputer Configuration?  In both cases I went to GPMC and under both, it would
    say I had to go to the Actions menu to create a New Software Restriction policy.  I did so (just picking the item in the Actions menu), and the resutlt was some choices under the actual GPO now, none of which I've yet configured. 
    So, I need to torublesahoot this ut also to know where such a thing causing this error message would be set under normal circumstances.  Also, could antivirus cause this?  I can't see the error saying "group policy" if it did though. 
    Thank you very much. 

    Hi,
    Thanks for posting your issue in the forum.
    Based on your description, I suspect that maybe Software Restriction Policy has been configured in the domain. At this time, I suggest we could try to collect the following information to narrow
    down the cause of the issue.
    GPMC.log
    ==================
    a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
    b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
    user in the wizard)
    c. Right click 
    the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
    Once we get the report, please check if the Software Restriction Policy has been configured and applied to the problematic computers and users. If so, please disable the policy setting to see
    if the issue persists.
    In addition, please try to refer to the following articles for detailed information about Software Restriction Policy and how to troubleshoot Group Policy problems.
    Software Restriction Policies
    http://technet.microsoft.com/en-us/library/hh831534.aspx
    Troubleshooting Group Policy Problems
    http://technet.microsoft.com/en-us/library/cc787386(v=ws.10).aspx
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback
    on our support quality, please send your feedback here.
    Andy Qi
    TechNet Community Support

  • PDF file shows different numbers of text blocks in CC 2014 and CS6

    Hi,
    I've inherited a file at work that displays different numbers of text blocks, depending on the version of Acrobat used to view the file. Here's the specific issue:
    As viewed in CC 2014:
    "Chapter 1 - Chapter One Title": Appears as two text blocks -- one for "Chapter 1 - " and one for "Chapter One Title"
    As viewed in CS 6:
    "Chapter 1 - Chapter One Title": Appears as a single text block -- "Chapter 1 - Chapter One Title"
    This occurs only with regard to single-digit chapter numbers that are whole numbers. So:
    Chapter 1, Chapter 5, and Chapter 7 entries appear as two blocks in CC 2014, one block in CS6.
    Chapter 2.0, Chapter 6.1, Chapter 10, entries appear in single blocks in both CC 2014 and CS6.
    The PDF file was created -- I believe -- through the save-to-PDF feature in Word 2010.
    Any idea what's happening here?
    Thanks.
    David

    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • I need help in finding previously purchased ISBN numbers in a block. I used three from block of ten, but misplaced the remainder?

    ''dupe of https://support.mozilla.org/en-US/questions/916043''
    I had purchased ISBN numbers in a block of 10 previously and used only three at an earlier time for three books. I am now in need of two more, but can't find the original list I purchased. How can I get the original list of ISBN numbers without incurring further cost?

    How is that related to Firefox support?
    Try contacting Bowker. <br />
    http://www.bowker.com/index.php/contact-us

Maybe you are looking for

  • Blocked sales order showing in MD04.

    Hi, I have put delivery block in sales order, still sales order showing in stock requirement list (MD04)? Why and how I can avoid this? Thanks in advance

  • Avoid window getting focus after pressing a mouse button on it

    I want that a window does not get focus although I press a mouse button on it, in Windows XP. I have search in Microsoft help and this fact is controlled by the Operating System itself. The notification that is sent after the user presses a mouse but

  • Billing cant be released to accounting?-

    Hi,      I have created billing & trying to release it to FI. But i couldnt.System throws message, "Document cant release to accounting,Foreign trade data is incomplete"? Let me provide more info, This sale is between company n customer within same c

  • Remove results that found based on the portal host header

    Hi, In case our portal named http://test, When search the word "test" -user want to get only results with the text "test" and not results that their url's starts with http://test/* How we can remove the non-relevant results? (maybe with a query rule?

  • Weird 'download' error after updating to ver 5

    After updating to ver 5 on Mac OSX snow leopard I occasionally get chrome://mozapps/content/downloads/download.xml:68 script errors appearing in the download window. I am not trying to start any downloads when the error appears... It stops firefox fr