My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Similar Messages

  • I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please

    I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please?

    It might be logical to someone, but not to me. I agree it's a pain.
    How did you change your Apple ID? Creating a new one is not what you want to do, but if you changed the ID associated with your purchases then that might have worked. You would need to sign in with the Apple ID on both your iPod Touch as well as in iTunes. I'm not sure how you changed it but clearly they need to match.
    If it's just your password that is not getting recognized reset it here: http://iforgot.apple.com/
    It will send an email confirmation to the email address associated with that Apple ID. The email address you elect to use might not look anything like your Apple ID. If you don't appear to get an email check your spam filter.

  • Cascading LOV in af:table will not refresh correctly

    Jdeveloper version 11.1.1.5.0
    I have spent quite a bit of time trying to understand why 2-level cascading LOV won't work in a particular situaion. I still haven't been able to fix it and so I turn to the ADF gurus on this forum.
    Here's the scenario:
    1. I have a ViewObject called AdjustDeltaValuesView. This VO contains attributes from its entity. It also has transient attributes called CategoryId and CodeId.
    2. There is LOV defined for CategoryId for VO CodeCategoryMasterView
    3. There is LOV defined for CodeId for LimitedCodeMasterView.
    3. View Criteria is created for LimitedCodeMasterView which sets a bind variable value from CodeCategoryMasterView.CodeCategoryId.
    4. I have wired all the LOVs correctly and it is working properly in ADF BC tester.
    5. In the UI, I have dropped AdjustDeltaValuesView data control as ADF Table where CategoryId and CodeId are displaying as af:selectOneChoice.
    6. CategoryId has autoSubmit=true and CodeId has partialTrigger set to component ID of CategoryId.
    7. The LOV inside editable af:table is working fine except one scenario that when user selects same categoryId from the category LOV in the second row, the CodeId LOV will not populate.
    Here's the code snippet of jspx:
            <af:table value="#{bindings.AdjustDeltaValuesView1.collectionModel}"
                      var="row" rows="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                      emptyText="#{bindings.AdjustDeltaValuesView1.viewable ? 'No data to display.' : 'Access Denied.'}"
                      fetchSize="#{bindings.AdjustDeltaValuesView1.rangeSize}"
                      rowBandingInterval="0"
                      selectedRowKeys="#{bindings.AdjustDeltaValuesView1.collectionModel.selectedRow}"
                      selectionListener="#{bindings.AdjustDeltaValuesView1.collectionModel.makeCurrent}"
                      rowSelection="single" id="t1" editingMode="editAll"
                      rendered="false">
              <af:column sortProperty="CategoryId" sortable="false"
                         headerText="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.label}"
                         id="c25">
                <af:selectOneChoice value="#{row.bindings.CategoryId.inputValue}"
                                    label="#{row.bindings.CategoryId.label}"
                                    required="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.mandatory}"
                                    shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CategoryId.tooltip}"
                                    id="soc3" autoSubmit="true">
                  <f:selectItems value="#{row.bindings.CategoryId.items}" id="si3"/>
                </af:selectOneChoice>
              </af:column>
              <af:column sortProperty="CodeId" sortable="false"
                         headerText="#{bindings.AdjustDeltaValuesView11.hints.CodeId.label}"
                         id="c27">
                <af:selectOneChoice value="#{row.bindings.CodeId.inputValue}"
                                    label="#{row.bindings.CodeId.label}"
                                    required="#{bindings.AdjustDeltaValuesView11.hints.CodeId.mandatory}"
                                    shortDesc="#{bindings.AdjustDeltaValuesView11.hints.CodeId.tooltip}"
                                    id="soc4" partialTriggers="soc3">
                  <f:selectItems value="#{row.bindings.CodeId.items}" id="si4"/>
                </af:selectOneChoice>
              </af:column>For example, where it DOES NOT Work
    1. User selects Category A from dropdown from the first row.
    2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
    3. user selects Code X from the dropdown.
    4. User selects Category A from the dropdown from the second row.
    5. PROBLEM: In the second row, Code Id dropdown does not populate. Code dropdown is empty.
    Where it works:
    1. User selects Category A from dropdown from the first row.
    2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
    3. User selects Category A from the dropdown from the second row.
    4. In the second row, Code Id dropdown populates correctly.
    Where it works:
    1. User selects Category A from dropdown from the first row.
    2. code Id dropdown populates with corresponding values in the list based on CategoryId user selected.
    3. user selects Code X from the dropdown.
    4. User selects Category B from the dropdown from the second row.
    5. In the second row, Code Id dropdown populates correctly.
    Has anyone come across this scenario? It's a very weird problem.
    I hope I have explained this well. If it's not clear please let me know.
    Edited by: Shah23 on Jan 14, 2013 6:42 PM
    Edited by: Shah23 on Jan 15, 2013 9:09 AM

    Hi,
    Always mention your JDev version.
    Try modifying your VOs as explained in this blog and see if it works fine : https://blogs.oracle.com/aramamoo/entry/how_to_create_multi_level
    -Arun

  • I designed a site for a customer, exported HTML, customer wanted to launch the site themselves so when they did so it will not work on a mobile device or tablet but is fine on the PC browser.

    The customer is using AT&T as the host, it seems to automatically map to the a mobile site when on a phone or tablet, could the mapping to a tablet site be on AT&T's end?
    I never setup the tablet or mobile site through Muse.

    As you don't include a link or other copy of your code there is no way we can answer this… however:
    Upload a copy of the site to bc (business catalyst) from Muse or Dreamweaver (if Muse can't) as a temp web site then test that the code works for laptop and phones. If it works on your bc site then your code IS correct and you have answered the main question as yes AT&T is the issue… this is basic testing and you (seriously) already should have done it before letting your client see it.

  • I updated my ipod touch 4th gen to IOS6 and now my music will not sync correctly. I have reset to factory settings twice, and the system works but my music will not sync

    Like i said above, my music will no longer sync. I can open the ipod, get on safari and what not, but when i attempt to sync, it says it is complete after less than a minute, and the music is not on it. I tried the manual artist upload and it is still unsuccessful

    Yeah, my itunes hasnt changed.

  • Adobe Illustrator file will not display correctly when logged in as a user

    I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

    After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
    That solved the problem!

  • HT1473 My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    My itunes will not open at all - I repeatedly get the message"itunes library is corrupted...not installed correctly...please reinstall itunes" I have tried opening all my itunes folders but nothing will even open.

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • My numbers application will not continue an update and will not open due to said incomplete update

    My numbers application will not continue an update and will not open due to said incomplete update

    open the application "LaunchPad" then locate Numbers.  Click and hold on Numbers until is starts to shake.  click the "X" in the top left corner.  click on the desktop to exit this mode.  Now open the App store and install again.

  • Numbers documents will not open it says "will not open during numbers update"

    My numbers documents will not open.  I keep getting a message telling me my documents will not open while numbers is updating.  I have the latest numbers update already downloaded.

    open the application "Launchpad":
    then click, and hold, on the icon for "Numbers", once the icons start to shake, click the "X" in the top left to remove.  Now click anywhere on the desktop to exit this remove/adjust mode.
    Open the App Store  (menu item " > App Store…")
    now locate and install numbers

  • Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open?

    Upon upgrading to Yosemite, the Pages and Numbers apps will not open (although they are the latest versions) and Keynote will not upgrade; how do I go about getting the apps to open? Is this a common issue?

    Hi Madhattanite,
    Welcome to the Support Communities!  When did you purchase your Mac?  The first thing I would suggest is to review the information in the resource below for the Up-To-Date Program for Pages, Numbers, and Keynote.
    Once Yosemite is installed, you should have the option to Accept the Pages, Numbers and Keynote apps in the Mac App Store Purchases pane.
    Apple - Up-to-Date Program for Pages, Numbers, and Keynote
    I hope this helps ...
    - Judy

  • Photo will not orient correctly

    From time to time, PSE6 refuses to orient a photo so it prints correctly. For example, yesterday I selected five photos to print as 4" x 6" JPGs. For the sake of discussion, let's say all five photos were oriented horizontally (landscape). I set my HP Photosmart C6280 to use the photo tray. Before I print, I check each photo's preview—here's where I discover the problem. Two of the five photos appear in the print preview pane so that the picture is turned the wrong way. Roughly half the picture is outside the preview. (By the way, that's exactly how these two photos will print.)
    I thought, OK, I'll just go back to the organizer and rotate these two photos. One of the two now displays correctly in the preview pane, but the other does not. I've tried printing the offending photo separately, but that doesn't help. The only soluton I've found so far is to open the problem photo in another application (something less sophisticated—Windows Live Photo Gallery, for example), where it prints correctly.
    I thought perhaps a fresh installation of PSE6 would fix the problem, but that didn't work. In fact, I've recently installed Windows 7 and then re-installed PSE6, and the problem persists. Any ideas?

    The behavior I've described occurs when I'm printing from the organizer.

  • Components will not resize correctly in Catalyst

    Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
    Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
    I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
    Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
    Ex. State 1:
    Animation/Action Sequence to the following:
    The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
    Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
    and this when stretched out:
    When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
    Any guidance?
    Message was edited by: joshlev

    Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache  since I could not see it on several computers that I had never pulled the site up on before.
    And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
    Thanks for all your help!
    Liz

  • HT1349 itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    itune will not install correctly on my PC  Error message reads "service 'apple mobile device' failed to start

    Hello cynthialane,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best of luck,
    Mario

  • Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

    Yes - email &amp; text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks.  If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?!  I've rebooted the iPad &amp; my wireless card several times but neither action helped.  Have any clue what I should do now?

  • Ever since the upgrade, my computer will not let me pick a new tab. I can't hit the plus or ask for a tab. How do I correct this??????

    Ever since the firefox did an automatic update, it will not let me select a new tab. I can't hit the plus sign or even if I click on New tab..it will Not work. If you right click on something and say open in new tab it will but it WILL NOT let me open a new blank tab to search in since the update.

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Maybe you are looking for

  • Problems Capturing Sony HC3 footage in FCP 5.1

    I have Final Cut Pro 5.1.4 HD and just bought a Sony HC3 Camcorder. It's HDV 1080i. It cannot initialize the device when I go to log and capture window, and it also won't detect the camera on startup. I tried unplugging and resetting everything, and

  • Web services Publisher Error

    Hello Experts, I am ruuning down with an issue in Web I - web services publishing. When i tried to Publish the report as Web services Url, it says Connection time out. I tried to Add host in manage servers area (which is blank ), again it says "conne

  • Any recourse for a failed device?

    Help. I upgraded to a Droid RazR in 2012 which never worked. Twice, it died and wiped out all data.  I abandoned it to stop the "bleeding" & had my old Blackberry reactivated for phone service. Is there any recourse or credit for a failed device I'm

  • Reconnecting missing tracks all at once?

    When in the library I often click on a track only to find that the track is unconnected.  If I then use Windows Explorer I always end up finding the missing track which I presumably misfiled.  I then cut & paste the track into the folder 'Automatical

  • Trying to resize jpeg in Preview but says I don't have permission...

    I have always resized images in Preview but this time around I keep getting an error message (screen shot attached) that I don't have permission to make any changes even after checking/changing when I right-click>Get info... I clicked on the little p