My old Airport Express wants to work but can't

So I've read a lot about Airport Express PSUs dying, but that isn't my issue here.
I bought this Express about 3 years ago. It worked great for the first 18 months as far as I can recall, we'd hold parties with Airplay streaming and everyone was really impressed.
I moved house and had no need for it so I lent it to my sister, who was in a wirless party house at the time. They could never get it to interact with their Netgear router properly so it just sat on the shelf for another 18 months. I've now moved into my sister's house and brought my Airport Extreme with me. We were hoping to live the Airport Express Airplay dream again and after some tikering and a hard rest I got the Airport up and running again and Airplay worked fine.
That was about 3 weeks ago.
2 weeks ago Airplay stopped working. It was cutting out and then it just gave up altogethor. Activating Airplay would cause the Airport Express to immediately go amber. With some tinkering I managed to have ti recover, I just had to keep Airplay running, manually go into the Airport Utility and convince the Airport to reset. By then the track tht ws playing might be about, oh, 3 minutes in. When the track changed to the next song, pfft, amber again. I maanged to recreate these situations several times.
But now, we're lucky if the thing works at all. I'm here in my bedroom on one bar of reception and my housemate Andrew has got, count em, three antennas coming out of his PCI wirless card for a single bar of reception, this is because the Airport Extreme is at the otehr end of the house. Every now and then the Airport Express splutters into action and we get something resembling a reliable connection. Unpluggin it and plugging it back in seems to do the trick. But it'll die again, solid amber.
So yeah, in summary an older Airport Express that had been reliable for years has deteriorated in 3 weeks. I don't know what to do, i can't afford a new one. Any suggestions are welcome, any requests for additional information/elaboration on parties will be answered.

Hello love4pugs...Welcome to the Apple Discussions!
Most likely, you just didn't leave enough time to do a complete power recycle of your network components so that your Motorola modem can "recognize" the new device (AirPort Express) connected to it.
Try the following...
Modem/Router Power ReCycling
- Power-off the Cable modem, AirPort Router, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AirPort Router; Wait at least 5 minutes.
- Power-on the computer(s)

Similar Messages

My 5 year old Airport Expresses don't work with the new Airport Time Capsule?

My question is after wasting hours trying to install my new Airport Time Capsule, Ive noticed that the "Airport Utility" doesn't recognize any of my 4 five year old Airport Expresses. An error message says " This version of Airport Utility doens not support this (these) base stations"? Does that mean that their is no work arounds which means I have to purchase 4 replacements?

You need the older airport utility.. that can be installed on Lion or Mountain Lion.. it cannot be installed on Mavericks.. do you have an older computer even a windows one.. or can access, borrow or bribe a friend over for drinks with laptop.. then you can configure your expresses.. !!
There is a rather complex workaround on Mavericks.. when I posted it in the past.. Apple deleted it.. go figure.
Kappy's post is still there.
https://discussions.apple.com/message/24338414#24338414
Perhaps they like him more than me.

Airport Express: Internet Access Works But Not "Seen" in Admin. Util. ??

Hi All --
I have a friend with the set-up described below and a seemingly impossible problem. he's asked for my help, and so I'm asking for yours, because frankly the situation just has me stumped. Here goes:
Set-Up & Other Relevant Facts
• DSL connection comes out of the phone jack and goes to a Westell model 6100 modem.
• From there, a short Ethernet cable goes to a Linksys 5-Port Workgroup Switch.
• Two Ethernet cables exit the Linksys Switch: one goes to a PC, and one goes to an Airport Express (AX).
• From the AX, a USB cable goes to a printer (a Brother 1440 laser printer).
• The AX is only about 10 feet from his PowerBook G4 15-inch and he gets a full (four-bar) signal on Airport menulet at the top of the screen.
• When he first set-up his system, the G4 and the Airport did set up the Brother printer (using the Airport Setup Assistant), and the Brother is listed as a printer on the G4's printer window or such.
• Both the G4 and the PC access the web fine via this setup (the G4 wirelessly). In System Preferences > Network, the Airport Network is listed, and it says "Airport is connected to the network Apple Network 6c6c1. You are connected to the Internet via Airport."
Problems
• When the Airport Admin Utility is opened, no Airport Express appears at all, even when "rescan" is repeatedly clicked.
How can this be? How can the PowerBook be connecting wirelessly to the Web through the Airport Express, but the Airport Express no be "seen" by the Airport Admin utility?
• In addition, although web surfing is possible for both PowerBook and PC, neither computer is able to successfully print to the Brother 1440. When he tried printing from the PC, he got the following error messages:
[Status for LPT1]
Result=(02)The printer on this port is not responding.
Status Line=BUSY:H,ACK:H,PE:H,SLCT:H,FALT:H,SLIN:L,HBSY:H,INIT:H,STB:H
Later, it seemed that printing from either computer would start and then stall, flashing a variety of different signals about spooling or "printer busy" and the like, all of which appeared to indicate things just weren't working right..
Anyway, the initial questions we're dealing with are the ones in bold above. The printer issues are probably are related and they can be addressed secondarily.
Any and all help with this will be greatly appreciated. Thanks everyone.
-- JDee

Thanks for your reply- just to re focus my problem- I
have no issue with getting a wireless network "green
light"
Which is the cable modem correctly giving the Express an IP from your ISP's DHCP pool of numbers.
- my issue is I can't stream itunes or get a
usb printer to work off the xpress USB port.
I have checked everything as my posts explain- The
reason I have been looking at this thread is I have
never been able to see the airport in a "scan" per
JDee post.
That is odd and doesn't happen on my wireless network!
Nor have I read in any post that an extra
ip address is necessary
All routers have at least two IP's - an external and an internal. When the router acts as an internal DHCP server it hands out many more IP's. Your Express gets one external IP and the default internal one is set to 10.0.1.1 and the first IP handed out is 10.0.1.2, etc.
However I have seen different subnets- from dncp
server.
Are you talking about the external IP's that your ISP is randomly assigning without your control? Are you talking about the different ways you can configure the internal DHCP numbers? If not there's something else going on. Everything on Douglas internal network should have an IP from the Express DHCP server vs. JDee's internal IP's should all be assigned by the modem/router DHCP server. Once you have everything on the same network numbers AirTunes, printers, and Airport Admin Utility lists just work!
Hey look I really appreciate your help here in
anyway- I'm really stumped. I want to stream music
really bad... and just don't see why it won't work-
its drving me crazy...
I enjoy a good challenge, especially when they are solvable. After trying all the possible software and connection possibilities there's always the chance it's been a hardware failure all along
What IP number does your computer have and what number does the Express have? If it's a router it has two IP's!

Airport Express has green light but can't be seen in airport express

I had something odd happen with my wifi network today. I have reset everything and gotten all my Airport Expresses (AE) working again except one. This AE can not be seen in the Airport Utility (AU) no matter what I do. I have brought it into the same room as the transmitter and it would still not be seen. So I connected it to an ethernet cable and when I did the light turned green but still nothing in the AU. Each time I have changed configurations I have attempted to let the AE attempt to start on its own, I have performed a soft, hard reset and then a factory reset.
This is an older device (b/g not n as I recall) - what am I missing? It is difficult to determine if the device actually resets but the light blinking seems to match with descriptions of the process on the web. This all worked yesterday and this morning until my network went haywire (only the 2.4 GHz signal went out, I changed channels and reset and it has stayed up since). All the othe Airport devices could be reconnected by a hard reset after which they appeared in the AU and I could then reconfigure. This one AE just will not cooperate.
Any thoughts will be appreciated.

The model number is A1084 and I am using version 7.6.1 of AU.
When I attempted the hard reset the list starts off amber then after 5-10 seconds the amber light flashes rapidly and that is when I remove the paper clip I am using to push the button. Afterwards it goes solid amber for a bit then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green
When I attempted the factory reset it is solid yellow for quite awhile then I get a rapid flashing green light at which time I remove the paper clip. It then goes back to amber for awhile then flashes amber. If the devices is not plugged into the ethernet it stays flashing amber, it it is connected to the ethernet it goes steady green.
In neither case does it appear in AU. Also FYI I am running Mountain Lion although everything has worked fine until yesterday.
Thanks for the reply

Airport Express listed in Itunes, but can't connect (error -6753)

I had to reset my router (Linksys) and Airport Express yesterday. Everything is reconfigured, with one exception. I have a green light on my AE and itunes lists it in the speaker selection bar, but it can't connect. I also cannot connect to the AE using the admin tool. The admin tool lists the AE, prompts me for the password then fails. In both cases (itunes and admin tool) error -6753 is reported.
Any ideas?
Windows XP

nickpiri wrote:
I can connect directly to Airport Express and stream via itunes. When I configure the Airport to connect to my new Dlink modem/router, the Airport light goes green, I can see it in iTunes as an option to select but when I select it, the "connecting to Airport.." box appears but it doesn't connect. I don't get an error message.
I've also tried configuring with no network security on the router but this had the same effect.
I'm having the EXACT same problem as nick.
I spent some time talking with support about this and basically concluded that it was an issue with the router (D-Link DIR-625). However, I've exhausted efforts with opening ports and even put the airport in the DMZ...still nothing. I'm hoping someone has some new info on this that doesn't involve a new router or rearranging equipment throughout the house

Airport Express connects (green light), but can't connect to server

Hi!
I set up my airport express (and it took me a while) and it worked great for 2 years!
I recently moved and tried to set it up again, and it will not work. I even returned the settings to the factory settings and still and having great difficulty in connecting. I just set up comcast internet, and plugged the AE into the modem via ethernet. I entered in the proper info (IP, subnet mask, router #, DNS, and domain) manually, as the default settings wouldn't work. I recieved a GREEN light on the AE and am able to access it via Airport Utility. However, I am unable to access the internet with safari or firefox (they can't find the server). I can access the internet with just the ethernet plugged into the macbook.
I have tried resetting the AE many times, and have done MULTIPLE power cycles, and still cannot fix the problem. Can someone help me?

What Comcast modem (brand and model) do you have? Was it connected to any other device (perhaps the computer you used to set it up) before you tried to connect the AirPort Express? If so, you'll probably have to reset the modem (perhaps by cycling power) to convince it to connect to a "new" device.
I'd avoid those manual settings. You shouldn't need them and they can cause other problems.

Airport is on and working, but can't connect to internet with MacBook

I have a green light on my airport Extreme, my laptop can join my network fine and get 4 bars of connectivity.
But I cannot get on the internet with my laptop. Websites don't work.
What am I doing wrong?

Were you able to copy the DNS addresses to the MacBook? Were you able to delete the incorrect ones? Did you restart the MacBook before trying to access the Internet again?
How about the IP address for the MacBook? It should be in the address range of 10.0.1.2 - 10.0.1.200. Is it? Of course I'm assuming that you did not change the default DHCP range of your AEBSn. Your iMac should also be assigned an IP in this range.

Airport Express will connect wired, but can't get it to connect wireless

I purchased three APE units specifically to connect my iTunes library to multiple house receivers. I went through the setup for two of them, but as soon as I unplug the ethernet cable, the wireless network won't recognize them. I tried rebooting the router. DIdn't work. Next I tried unplugging the APEs and plugging them back in, but unless the ethernet cable is connected I get ther persistent flashing amber light. I should mention that my iTunes library resides on a PC running windows 7, but I also have a MacBook Pro, iPad and iPhone; all of which I will be using to controll my music if I ever get this to work.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT5022 Airport Utility 5.6 does not fix the old Airport Express!

My old airport express does not work anymore - the Airport Utility 5.6 makes changes but after re-starting, the Airport Express cannot be found. Now I am forced to buy a new one. Not good (and sold out as many experienced the same apparently)

Do you get any sort of error message when you try to install, and if so what does it say?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

I have an old airport express base station from 2005
I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
Can i update the firmware? has it become useless because too old or what can i do?
I work on macbook pro with macOSX 10.9.4
Can someone give me some tips please
thanks
J

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

I have an old Airport Express I want to use to extend WiFI (which is best Airport Express or Extreme) and to have a HD for storing Itunes connected to the old Airport as well. I would also like to have the new Airport hardwired to my Mac (desktop)

I am willing to buy a new Airport Express or Extreme so I can get at least one LAN port - but only if I can use that LAN port to connect to my MAC (desktop) so it doenst have to get internet via the WiFi- AND so I can set it up as its own hot spot. I think I saw that was possible?? That way my guest network would be separate from my home Network. Just trying to get the best layout. I have cable modem to old Airport now and USB from it to printer.
Maybe a new Airport - again USB to printer and LAN to MAC(?) then old Airport elsewhere in the house to extend the signal and use USB off it to hard drive to store Itunes? Would LOVE to have it there to use for Airplay etc- Is that possible- I have read many comments and still not sure if it is possible or not.
Baxically I need a simple solution to storing all my photos- music and movies (MAC only has 500GB) AND have a great back up; Currently have a 1TB drive as Time Machine - so could use that for back up- but running out of space on MAC for all the media I am saving. THANKS!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

Hi,
I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
Thanks for your time.

The same thing started happening to me this morning. I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes. Everything worked fine until this morning. I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything. The problem persisted. However, I had no problem playng music from my iPad library through the system using the iPad.
I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app. Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro. I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message. When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time. When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help.
For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

HT1515 How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

I have an old airport express, but the software on my computer does not accept it. I need to downgrade the software, but the older software will not install.

I have a old G4, I want to give to my son. It does not have a wireless card and because his room is on the second floor it is impossible to connect with a wire.
I wish to add an airport express to my airport extreme network and connect the computer and the airport express together with a cable. Is this possible?
second question:
software does not install.
I do have a network with a airport extreme and want to add the old airport express to it. I want to do this with airport software, however the software tells me the airport express is to old and i need to reinstall older software 5.6 to be precise. However installing fails, so I thought i just remove the airport software, but osx does not allow me to do that.

i managed to install the older airport utility and am trying to set up a connection with an existing network, but airport utility cannot find the airport extreme AFTER it starts up again. I then went and again restored it to its factory settings and did the whole procedure again with airport utility, but again after utility tells the airport express to restart it does not come back.

My old Airport Express wants to work but can't

Similar Messages

Maybe you are looking for