My old mac powerbook g4 wont boot up, it wont show apple logo and spinner aswell just stuck on grey screen while booting please help me

i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!

Resetting PRAM and NVRAM is not working
and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me

Similar Messages

  • My iphone3g wont turn on,it only shows apple logo and making a connection sound when i charge it.

    How to trouble shoot iphone 3g?

    - See if placing the iPod in Recovery mode will allow a restore.
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Last, make an appointment at the Genius Bar of an Apple store.

  • Imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

    imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

    Hey there mtriest,
    It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Disconnect, test peripheral devices and network cables
    Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
    Disconnect any Ethernet cables.
    Start up your Mac.
    If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
    Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
    If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
    If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
    Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
    Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
    Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
    Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
    If your Mac starts up as expected, immediately try restarting.
    If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
    There is additional information in the article with further troubleshooting if needed.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • S930 stuck at Lenovo screen while boot up.

    My S930 stuck at lenovo screen while boot up.
    I tried to leave the phone while waiting for it to boot until the battery drain out.
    Then charged till full , try to boot again and it still stuck at the same lenovo screen..
    What to do? How to reset / factory default ?
    Please help. TQ

    Issue :- G500 Lenovo laptop screen gets stuck at lenovo screen and does not allow to do any thing alternatively need to power off laptop.
    I am also having this same problem occasionally. In that case if my screen stuck at lenovo screen then I turn off my laptop, After while when I turn it on then problem go off. But today same method did not help me, finally I removed  my batter for a while then plugged it again which again resolved the issue.
    I purchased my G500 lenovo laptop 4 or 5 months ago , it had been working fine for first 3 months but after it I encountered with this probelm.
    I updated my bios with latest available version but that also not helped me
    My concern is that why this problem is occuring occasionally. Request you to share valuable steps and guide us to get rid off from this problem.
    Thanks and Regards
    Ashok Dewan

  • HT204347 Hi my serial number on bottom of my mac is W8*******66E when l try to try the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not

    Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
    <Edited by Host>

    What other solutions have you tried?
    This may help you:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • MacBook doesnt boot. It shows Apple logo and spinning wheel. Soon it wont go beyond prohibitory sign with spinning wheel

    I have a MacBook (Late 2008 edition) having Mac OS X 10.6.8 SnowLeopard OS installed (2 X 512GB RAM, 160 HDD). I copied some mp3 into iTunes library and soon the process got stucked. MacBook was not accepting any command/it seemed to got hanged. Carelessly, I switched the MacBook OFF by pressing the Power button. Now, when it began to boot again, all I hear was some clicking sound from the MacBook (seems HardDrive failure because the sounds seems to be from HardDrive). After few seconds, It showed flashing folder with question mark and it wont go beyond that.
    Steps I tried:
    1. Resetting NVRAM, PVRAM and SMC.
    2. Booting in safe mode.
    3. To boot from install DVD (Mac OS X 10.6.3 SnowLeopard).
    4. Holding down 'option' button while booting. It shows the "Mac OS X Install DVD" icon but as I click it and press return, it again shows Apple logo with spinning wheel and little later it shows prohibitory sign with spinning wheel. This will now remain for ever and ever.
    5. I bought a new 500 GB HardDrive and replaced the old one with this. Now trying to boot with DVD (Mac OS X 10.6.3 SnowLeopard) it again hows Apple logo with spinning wheel and little later it shows prohibitory sign with spinning wheel. This will remain for ever.
    Any suggestions to overcome this problem will be highly appreciated and I'll be very grateful for all your help.
    Thanking You.

    Hi julenawang,
    Welcome to Apple Support Communities.
    It sounds like your MacBook has a startup issue and you aren't able to reinstall Mac OS X on a new hard disk. The article linked below has a lot of great information and suggestions that will resolve most issues like the one you described.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    I hope this helps.
    -Jason

  • Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

    Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
    Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
    now my ipod is in dead case, it just gives apple logo  and wont start.
    Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
    Method 4: netsh xyz  (comand) in cmd...
    Please Help thank you.
    "Details:
    ipod touch 4g
    ios 6.1 installed (lastly)
    jail broken but deleted cydia from it
    then tried to restore it always gave Error 3194,
    then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
    my itunes on dignostic gives this report,
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP xw4400 Workstation
    iTunes 11.1.1.11
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001AB71808E6CBD8
    Current user is not an administrator.
    The current local date and time is 2013-11-29 04:19:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
    Description:    Broadcom NetXtreme Gigabit Ethernet
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Fri Nov 29 04:16:55 2013
    Lease Expires:    Fri Nov 29 06:16:55 2013
    DNS Servers:    192.168.1.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-29 04:18:45.

    lllaass thank u bro, but none worked for me
    i have tried all these methods n above which i mentioned before....
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

  • Updated to Tiger, stuck on grey screen BUT boots fine with option key

    I've searched the forum and found many other similar threads. But no real answers for my particular problem. Here it is. iMac 800 MHz G4, 512 RAM was on 10.3.9. Updated to 10.4.5. Then booted from a firewire hard drive and fixed permissions and ran Disk Warrior. Now when I try to boot up normally it just stays on a blank grey screen. No Apple logo. No spinning wheel, nothing. Weird thing is it boots up fine if I hold down the option key at start up and select the hard drive. So, I've done that and repaired permissions and run disk utility. Says everything is OK. Even zapped the PRAM. But still, only way to get it to boot is by holding option key and choosing hard drive. Any ideas?

    Hi Steve, What other start up options are you seeing when you boot with the 'Option' key? Have you tried a 'Safe Boot"? Hold down the 'Shift' key while restarting until (hopefully) you see the spinning gear wheel. Wait while it restarts, this takes a lot longer. If you can boot into 'Safe mode' then in System Preferences>System>Start up disk, make sure that your hard drive is selected.
    If you can't boot into 'Safe mode' (you should be able to) then when you have booted with the 'Option' key, follow the 'System Preferences' advice above. Select your hard drive & 'Restart'.
    Also have a look at
    Dr Smoke's Troubleshooting Startup and Login Items.
    For future reference, bookmark his X-Lab home page. There is a wealth of helpful information. Obviously he'd like you buy his 'Troubleshooting' e-Book, but there's loads there for free.
    As Dr Smoke would say: "Good luck! "
    Have fun too!
    An  a day...
    Adrian
    ibook G4: 768mb, iMac 17" G4:768mb (10.3.9)   Mac OS X (10.4.4)   Belkin Wireless F5D7632

  • After I update to firefox 4.0 it wont load any of my facebook games. And I don't know how to fix it. Please help Internet Explorer sucks!

    I updated to firefox 4.0 and it wont load any of my facebook games.

    Facebook games are usually Flash based.<br />
    Your More system details list show that you have the Flash plugin, so that should be working.<br />
    Make sure that you do not block Flash.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • IPOD Touch only shows apple logo and computer will not recognize IPOD in iTunes or on my Mac.  Cannot restore.

    My IPOD Touch 3G is frozen on the apple logo.  It will allow me to reset it.  The computer no longer will recognize it.  I have tried on several Macs and it seems as though the problem is with the IPOD and not the computer since none of my MACs will recognize it.

    You can try to put it on Recovery mode then restore it..
    Press or Hold the power and home keys 10 seconds.
    Screen goes black, now release the power button
    Make sure you do not release the Home key until
    your iTunes says "We have detected an itouch
    in recovery mode."
    After this its simple all you
    got to do is a simple restore using your iTunes

  • My touchsmart 300 wont start just has a black screen can you please help

    My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help

    My touchsmart wont start just has a black screen fan runs light is on. I unpluged it and help the start button for 5 sec and still wont start. can you help

  • Macbook 2008. Did an erase and install from install disk that came with the mac but now it won't move pas the Apple logo with spinner.

    My Macbook was running slow and kept giving me error codes so I figured the easiest thing to do would be to erase it and do a fresh install. But now, after installing with the disk 1, it won't move past the grey Apple logo screen.
    I've done disk repair and verified and there seems to be no problems.
    Any suggestions?
    thanks

    MacBook, Mac OS X (10.7   < your profile
    Did you try >  Lion Recovery

  • My iPhone 3GS displayed a message that it was overheated, now it wont turn on except for the Apple logo, and iTunes doesn't recognize it!

    My iPhone 3GS displayed a message saying it was over heating and to turn it off.
    I turned it off and the next day that I turned it back on, it wont go passed the main Apple screen.
    It had a message to re-connect to iTunes, then that the IMEI and SIM were unknown.
    Now it wont turn on at all!!

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • My iMac wont go past the grey screen with Apple Logo and question mark  a caution mark

    My iMac wont go past the grey screen with Apple Logo and question mark  a caution mark

    You may find this support article helpful:
    http://support.apple.com/kb/TS2570
    Ciao.

  • I want to give away my old Mac Powerbook G4 to a friend, what is the best way to cleanly do this?

    I want to give away my old Mac Powerbook G4 to a friend. Ideally I'd like to get my iphoto/itunes library deleted, but am afraid it will delete itself on my new MacBookPro as well.  This would be tragic.  Ideas?

    If you used the migration assistment then your data will be okay.
    I (and most of the people here) would strongly recommend you reformat the computer before giving it to anybody

Maybe you are looking for

  • My iPod Touch 4g will not stop crashing since iOS5 update?

    Ever since I updated my iPod Touch 4g with iOS5,  most of my apps, and even Safari, The App Store and Youtube, crash often, and it's becoming very annoying.  Before the update none of those crashed.My iPod Touch 4g is barely a month old and it crashe

  • ADF how can i execute a query with parameters when the page renders

    hi i am using ADF web 11g i need to execute a query with parameters when the page renders thanks

  • Canvas of canvas type "tab" doesn't get displayed

    I have one canvas which displays fields from two database blocks. Next I have a second canvas of canvas type "tab". I have already added the fields in the tab pages but the problem is that when I compile and run the form, only the first canvas is dis

  • BTE to modify BSET contents

    Hi, Does anyone know any BTE where I can change BSET contents when creating one finantial document ? I need to update fields BSEG-HKONT and BSET-HKONT in some cases and I'm using BTE 00001120 to update BSEG-HKONT for taxes item, but it has no efect o

  • Change Date in GL Calendar Periods

    Dear All, I created the Periods In GL Calendar and by mistake I put wrong date for one Period. and generated the calendar. I get Error "APP-SQLGL-08044 You can only modify periods that have never been used". is there any solution/way to change the da