My older username is not working...had to create a...

how can i ge into my old account its saying is not found but whden i look i up under my new profile i found it...I would like to use my older username i have all my conacts under that profile...How can i get into that profile

Read here:
https://discussions.apple.com/docs/DOC-3141

Similar Messages

Older ipod will not work under itunes11

My older ipods will not work under itunes 11, Who can help?

i think at this point we are unsure if the problem is that apple has once again decided to leave something older in the dust (as they've been doing a LOT lately) or that you've found a bug in itunes 11 that will be addressed at a later date. just how old are these ipods? if they were mine and i had to choose between itunes 11 and my ipods i would choose my ipods. right now i would look around the itunes forums and see if anyone else has this problem.

BB apps is not working, how to create BB email add? please help

BB apps is not working, how to create BB email add? please help

If none of the blackberry apps are working and you are unable to setup an email address..... have you got a Blackberry Data Plan active on your account?

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

HT4798 username/password not working after upgrade to mountain lion

hello, on my imac after upgrading to mountain lion my computer password and/or username seems not to work anymore: when i want to install an update or search for updates on the app store the combination i used so far, does not work anymore. i tried to find out how to reset the computer password but without too much success, and i'm a bit confused, what can i do? thanks a lot

You went wrong at the very beginning by not erasing the hard drive of a used computer before starting to use it yourself. I suggest you do that now.
Back up all data to at least two different storage devices.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume, so you had be better be sure of your backups. Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Proxy definition username password not working

I am trying to create a new proxy definition for a wsdl that exists on a Microsoft Reporting Services server. The url is
http://servername/ReportServer_WEAVER1/reportservice2005.asmx?wsdl
It wants a username and password to access it which I have provided as domain\username and password. This works fine from IE and firefox but it is not working from NWDS (7.0.11). I have also tried not using the domain but still it is not letting me access it. Is there something different about the way NWDS accesses the wsdl url? Are there any settings somewhere in NWDS that I need to change?
Thanks
Edited by: Paul Hodgdon on Dec 3, 2010 6:33 PM
Edited by: Paul Hodgdon on Dec 3, 2010 6:34 PM

Hello Paul,
As suggested, please download the WSDL and import it from the local machine. To get the structure of the WSDL in design time and to implement the code according to that we need to import the WSDL in NWDS. also i think you can provide any username/password in design time, it is not at all going to give error in Run Time.
Regards
Nizamudeen SM

IPhone 5 power button not working, had it since end of December, do I need to speak to orange/EE or will apple look at it

My power button on iPhone no longer works, do I have to take it back to orange/EE or can I contact apple and would they fix/ replace handset, only had phone since end of December

Hello andmk007,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
The Home button is not working
Put the iPhone to sleep.
Wait a couple of seconds.
Press the Home button.
iPhone should wake up.
If iPhone does not wake up, then iPhone should be serviced.
Best of luck,
Mario

Ibooks is not working - had enough so seeking alternative!

ibooks not working on my new ipad- tried reset etc...circle top right keeps turning and turning - not changing - anyone recommend another app that I can store and read my pdf's on please?

Ibooks isn't working properly there is lots and lots of post on the net about this on various different sites with similar problems to mine - the only thing I hadn't done as you have suggested is remove the ibooks app and re install I had been reluctant to do this as I have 6gb of files installed, but looks like I have no option now but to try that, thanks for your tip about Good Reader, this has been mentioned elsewhere - so I will take a closer look.
Thankyou for replying to my email.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Hyperlinks not working in PDf created from Keynote '08

When I produce a pdf from File > Print in Keynote '08, the hyperlinks do not work in the pdf. I have tried all the various pdf settings (even the ones that export hyperlinks) and no luck, the links are not working in the pdf. If I invoke the File > Export > PDf command in Keynote, the hyperlinks do work, but Export does not provide as much flexibility in PDF creation that File > Print does, thus my need to go to File > Print.
Any suggestion?
Yvan

sandman39 wrote:
If I export to pdf in Keynote, all my saved hyperlinks default to http://livepage.apple.com/ (when the pdf is subsequently opened in Adobe Reader).
Are you sure that you really entered a link when you created an Hyperlink?
The described one is the one which is used by default by every iWork's components.
We must enter the true one by ourselves.
Yvan KOENIG (from FRANCE samedi 13 septembre 2008 18:05:31)

Spry drop down menu not working after page created from template

Hi all.
I created a template and the drop down Spry menu is working fine on local testing on my browser as follows:
I then created a New Page from this above Template. I did no alteration to this new page and just saved it as index.html but when previewing it in the browser, the Spry drop down menu is not working and the page displays as follows:
Here is my site map:
Any help to show where I am going wrong would be much appreciated.
Thanks.

Dear Nancy
Very grateful for your reply.
On Design View and Preview in browsers the index.dwt page spry works fine.
When I create a child page from this template page, the child page looks fine in design view but does the spry fails to preview in browsers (the spry just shows as words and not drop down menus).
Here is the code:


!/cooltext454549176.png|height=170|width=631|src=/cooltext454549176.png!
!/logosmall.jpg|height=58|hspace=0|width=150|src=/logosmall.jpg|vspace=0!
Disclaimer:
Studentshub is a platform for listing services as advertised/promoted by the Companies and individuals concerned. Studentshub does not endorse any of the contents on this site. Studentshub accepts no responsibility for any arrangements, purchase, contracts, agreements, refunds, failure to deliver services etc between individuals, landlords, clubs, organisations, companies etc. This does not affect your statutory rights (2009)
*Contact !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
Sitemap !/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!*
© www.studentshub.co.uk *
!/bluebutton.gif|height=10|alt=Blue button|width=10|src=/bluebutton.gif!
!/cooltext454549388.png|height=138|width=700|src=/cooltext454549388.png!
[LIVE | #]
[CAMPUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOUSE SHARE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[RENT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BUY | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK | #]
[EMPLOYMENT AGENCIES | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[PART TIME | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[VOLUNTEERING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WORK ABROAD | #]
[TRAVEL | #]
[BUS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[TRAIN | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[COACH | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FLIGHTS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[CYCLE | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[FUN | #]
[NIGHTS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[DAYS OUT | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[GROUP OUTINGS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOLIDAYS | #]
[UK | #]
[ABROAD | #]
[SHOPPING | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[BOOKS | #]
[BOOKSHOPS | #]
[USED BOOKS | #]
[HEALTH | #]
[NHS DIRECT | #]
[HOSPITALS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[WALK IN CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHASHIRE | #]
[LEICESTERSHIRE | #]
[GUM CLINICS | #]
[DERBYSHIRE | #]
[NOTTINGHAMSHIRE | #]
[LEICESTERSHIRE | #]
[HOME | #]

</script>
</body>
</html

PS - Substitution not working in WBS create

Hi,
I have this requirement. I want the last level of WBS to be automatically ticked as account assigned. I created a substituion with a user exit with a prerequisite as PRPS-STUFE >=1
I used the following logic in the substitution exit
Check in PRHI for every WBS element (POSNR) if 1st subordinate (PRHI-DOWN) is blank.
If it is blank then for that WBS element Account assignment element BLEKZ = "X"
The substitution works perfectly alright in the change mode but it does not work in the creation mode of the Project or WBS elements.
Any solution to this problem is highly appreciated.
Best Regards,
Manoj Bhoota

Hi Mango,
Substitution in WBS-element is called in function module G_VSR_SUBSTITUTION_CALL, you may set break point in the FM and the user-exit to check the import and export data during the project creation to see if the substitution do have called and the user-exit do export correct data.
Regards,
Rachel

Outlook 2003 Recipent Selection Not working on Word created emails

I have a user who when using word as his default editor, can see previously emails contacts but cannot select them. Selecting them just causes the select box to dissapear leaving the characters in the textbox.
He's set his default editor as outlook but the problem there is when he's typing long emails in a rich text format only the initial draft is sent rather than the entire email. I've read that changing the editor to word is a fix but with recipent selector
not working his outlook is pretty un-usable.
Anyone seen this before? He's running on windows 8.1 with office 2003.

Hello,
What's the difference between the permissions?
Can the users receive emails from OWA?
In addition, please make sure your Outlook 2007 has installed the latest update. And try to use
outlook/cleanips and check if it helps. See:
http://support.microsoft.com/kb/968773/en-us
Best Regards,
Steve Fan
TechNet Community Support

Replacing places.sqlite with older file is not working, please help I need my bookmarks

My hard drive was recently crashed so I had to reinstall windows 7 operating system. I recovered the deleted places.sqlite file from before the crash. I replaced the old file with new places.sqlite file but is not restoring any of the bookmarks
Please help, I have a lot of important bookmarks stored in old file
Please suggest a way to open the places.sqlite file manually & extract bookmarks from it or any other way to get the bookmarks back

It is possible that this copy of places.sqlite is corrupted if your bookmarks aren't restored and in that case you can't use this file and will have to delete all the places files (-shm and -wal as well)
If you also have a copy of the JSON backups in the bookmarkbackups folder then try to restore the bookmarks that way.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*https://support.mozilla.org/kb/restore-bookmarks-from-backup-or-move-them
You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

My older username is not working...had to create a...

Similar Messages

Maybe you are looking for