My operation system is very slow

plsmy operation system is very slow and internet explorer is keep crashing .is any one can help. which software to install and how to update my computer? regards 

Pavlion, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • All of the sudden our Mac OS X 10.7.4 operating systems are very slow to access SMB shares on our MS2008 file server

    Monday all of our OS X Lion Macs can access SMB file shares on our file server and we come in Tuesday morning and now they take at least 1 minute to pull up the file share and sometimes longer.   Windows PC's are immediate when connecting to the same shares.  I've seen where others with different versions of OS Xhave this issue but what gets me is it happend all at once to machines that were working perfectly the day before.
    I've also looked into changes on our servers and as far as I can tell there have been none. 
    Does anyone have any ideas?     Thanks....

    This solution worked for me!
    I had a MobileMe account with iDisk configured on my MBP even though I never actually used it.  The night they officially shutdown MobileMe the next morning I could no longer connect to my work's SMB file shares (Windows server shares).  I found a work around based on some other support threads.  If in the "Connect to Server" address field in Finder I specified my crendentials (i.e. smb://username:password@server/) then it worked perfectly fine.  This told me it was a crendential issue.  Simply deleting the saved server crendentials in KeyChain Access did not resolve the issue.  No matter what I would did it would not prompt for login crendentials.  Since my Mac login is different than my work domain login I was dead in the water without manually specifiying (not a permenant solution).
    After finding this thread I did the following steps and it resolved the issue 100%.
    1. Open Terminal
    2. cd ~/Library/Preferences
    3. ls .GlobalPreferences.plist to verify file exists in that directory
    4. rm .GlobalPreferences.plist to delete file
    5. ls .GlobalPreferences.plist to verify file no longer exists
    4. Go to Force quit to relaunch Finder
    5. Lauch "Connect to Server" within Finder and all was good, server connects perfectly
    Thank you very much DavidRSewell!!!!

  • While creating Billing, system is very slow..performance issue

    Hi,
    While creating Billing, system is very slow. How can I debugg and provide the analysis where is the exact problem.
    This is showing performance issue.
    Waiting for kind response.
    Best Regards,
    Padhy
    Moderator Message : Duplicate post locked.
    Edited by: Vinod Kumar on May 12, 2011 10:59 AM

    hi,
    Chk the links
    http://help.sap.com/saphelp_nw04/helpdata/en/4a/e71f39488fee0ce10000000a114084/content.htm
    Re: How to create Secondary Index?
    How may secondary indices I can create on the ODS?
    Deletion of ODS index
    Ramesh

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

  • After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

    You can always shut it down manually via the Task Manager
    (CtrlShiftEsc)...
    On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

  • Why system is very slow after installing Mavericks

    After installing mavericks my system becom very slow. startup also very slow. when i open an application it spins. what should i need to do

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?

    After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
      Model Name: MacBook Air
      Model Identifier: MacBookAir6,1
      Processor Name: Intel Core i5
      Processor Speed: 1.3 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 4 GB

    Hi ..
    Better to troubleshoot Yosemite.
    Not enough free storage space can slow your Mac down.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.   OS X Tips Where did my Disk Space go?
    As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:   Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • Why the system is very slow than before

     I have two computers, One is desktop, another is laptop,but I met the problems about the performance for the two
    computers, from last Monday, two computers speed are very slow, after I checked the task manager, I found the service(ntoskrnl.exe) used the 60-70% CPU resource, but why the ntoskrnl.exe cause this? I also download the tools and analysised it, but it seems
    that no useful information,how to find the root cause?
    summary all the information as below
    1.Suddenly this problems happened
    2. I closed the AVP (Kaspersky antivirus software), but it seems no improved for the performance
    3. I have closed the Windows search service, but no change for this
    4\I use the maxthon and Firefox browse
    , all the same thing happened.
    you can download the Log file from http://1drv.ms/WwTBhU

    Hi,
    Any update in this thread?
    http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
    Regards
    Yolanda Zhu
    TechNet Community Support

  • I installed yesterday iCloud , since the performance the system  is very slow with pinwheel at every clic

    I installed iCloud yesterday, since the system is very slow, with pin wheel at every click
    What can I do?

    I would ask in the dedicated iCloud forum.  Good luck.  https://discussions.apple.com/community/icloud

  • Compaq sr1320nx /win xp after keystroke/command, the system is very slow 10-15 secs. before response

    after keystroke/command, the system is very slow 10-15 secs. before response

    What I've done is that I reinstalled 10.8.1 and each time, I ran disk utilitiy.  It has helped but fter a while, especially when waking up from sleep, EVERY app can take a lot of time to come up, including those already activated.  Every click would take at least 5secs to respond... and then the spinning ball comes up.
    It's only after the same app was used, then it would be smooth.  For example, I run my cursor down to the bottom of the screen where my dock is hidden.  It would take a few times of running down before the dock shows up.  From that point on, it would would work nicely unless I click on any of those apps in the dock.  Then, it would take another 5secs or more before something shows on the screen such as clicking on Mail.  It takes more than 5secs before mail pops up.  Then, when I click on any mailbox, it would take another 5secs or the spinning ball comes up.  From that point on, clicking on Mail is smooth and cicking on the same mailbox is smooth unless I click on a different mailbox or go to preferences, for example.
    So, I keep running disk utility almost everyday and now, it works 99% of the time.  If it slows again, I run the disk utility.  I guess that's the way to go until they come up with a proper fix.
    All this housekeeping work reminds me of Windows and the endless defragging and optimising.  That was one of the few reasons why I switched to Apple and now...
    Dear Mr Steve Jobs, please send some enlightenment to your Apple teams!

  • IPad2 16GB 3G: The operating system responds very slowly

    Hello,
    If the wifi is turned on, the operating system responds very slowly to system inputs. This started after the iOS 6 update.
    About a solution, I would be very happy.
    Thank you.

    No answer?

  • ALSA: snd-via82xx - No sound but system gets very slow

    Hello!
    I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
    ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
    Does anybody have any hint?
    CU ActionNews

    Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
    amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%] [on]
    Front Right: Playback 31 [100%] [on]
    Simple mixer control 'Master Mono',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 0 [0%] [off]
    Front Right: Playback 0 [0%] [off]
    Simple mixer control 'Headphone +3dB Boost',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Headphone Amp',0
    Capabilities:
    Mono:
    Simple mixer control '3D Control - Switch',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control '3D Control Sigmatel - Depth',0
    Capabilities: volume volume-joined
    Playback channels: Mono
    Limits: 0 - 3
    Mono: 0 [0%]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%] [on]
    Front Right: Playback 31 [100%] [on]
    Simple mixer control 'PCM Out Path & Mute',0
    Capabilities:
    Mono:
    Simple mixer control 'Surround',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 0 [0%] [off]
    Front Right: Playback 0 [0%] [off]
    Simple mixer control 'Center',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 31 [100%] [off]
    Simple mixer control 'Center/LFE Jack',0
    Capabilities:
    Mono:
    Simple mixer control 'LFE',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 31
    Mono: Playback 0 [0%] [off]
    Simple mixer control 'Line',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%] [on] Capture [on]
    Front Right: Playback 31 [100%] [on] Capture [on]
    Simple mixer control 'Line Input Source',0
    Capabilities:
    Mono:
    Simple mixer control 'LineIn Jack',0
    Capabilities:
    Mono:
    Simple mixer control 'CD',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%] [on] Capture [off]
    Front Right: Playback 31 [100%] [on] Capture [off]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Mono
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono: Playback 0 [0%] [off]
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'Mic Boost (+20dB)',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Mic Input Source',0
    Capabilities:
    Mono:
    Simple mixer control 'Mic Select',0
    Capabilities:
    Mono:
    Simple mixer control 'Mic1 Jack',0
    Capabilities:
    Mono:
    Simple mixer control 'Video',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 0 [0%] [off] Capture [off]
    Front Right: Playback 0 [0%] [off] Capture [off]
    Simple mixer control 'Phone',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Mono
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono: Playback 0 [0%] [off]
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'IEC958 Output',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'IEC958 Playback AC97-SPSA',0
    Capabilities: volume volume-joined
    Playback channels: Mono
    Limits: 0 - 3
    Mono: 3 [100%]
    Simple mixer control 'PC Speaker',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 15
    Mono: Playback 0 [0%] [off]
    Simple mixer control 'Aux',0
    Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 0 [0%] [off] Capture [off]
    Front Right: Playback 0 [0%] [off] Capture [off]
    Simple mixer control 'Mono Output Select',0
    Capabilities:
    Mono:
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 15 [100%] [on]
    Front Right: Capture 15 [100%] [on]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'Mix Mono',0
    Capabilities: cswitch cswitch-joined cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'Exchange Center/LFE',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'External Amplifier',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    Simple mixer control 'Front Jack',0
    Capabilities:
    Mono:
    Simple mixer control 'Input Source Select',0
    Capabilities:
    Mono:
    Simple mixer control 'Input Source Select',1
    Capabilities:
    Mono:
    Simple mixer control 'Rear Jack',0
    Capabilities:
    Mono:
    Simple mixer control 'Sigmatel 4-Speaker Stereo',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'VIA DXS',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 30 [97%]
    Front Right: Playback 30 [97%]
    Simple mixer control 'VIA DXS',1
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%]
    Front Right: Playback 31 [100%]
    Simple mixer control 'VIA DXS',2
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%]
    Front Right: Playback 31 [100%]
    Simple mixer control 'VIA DXS',3
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Front Left: Playback 31 [100%]
    Front Right: Playback 31 [100%]
    Should be ok, but perhaps you guys find something wrong.
    in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
    CU ActionNews

  • I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and have slower operating speed, especially very slow upload of e-mail attachments.  Anyone got a fix, or advice on self-diagnosing the underlying problem?

    I recently downloaded and installed OS X Mavericks 10.9 on my MacbookAir3,2 and now seem to have slower operating speed, especially very slow upload of e-mail attachments.  Anyone got a fix, or advice on self-diagnosing the underlying problem?

    Try my Mac Performance Guide.
    If that doesn't help, post back here with the results of all the things you tried to do as part of that guide.

  • After updating Firefox, our (Windows XP) internet system is very slow ?

    Last week I updated our Windows XP system with Firefox latest download and now everything is really slow ? It takes much longer than it used to find web pages. I also had the same problem on my home computer, Vista ?
    Can you explain why this has happened and what I can fo about it
    Michael Buggins

    Hi,
    Any update in this thread?
    http://social.technet.microsoft.com/Forums/windows/en-US/ce42930b-f0f3-4df7-a621-d8f9d59109b4/why-the-system-is-very-slow-than-before?forum=w8itpronetworking
    Regards
    Yolanda Zhu
    TechNet Community Support

  • System running very slow

    Hi guys hoping someone can help, my system seems to be running very slow once the iMac has been on for a while, programs take a long time to open and there seems to be a general lag on the whole system.
    I have a lot of photos and movies on the drive so wasn't sure if this was not helping, also only have the standard 4GB ram and wondered if this could be the issue?
    I also try not to have too much third party software on the iMac.
    I have used EtreCheck so hopefully the issue may standout to someone a bit more computer minded that myself, thanks in advance Nucci.
    EtreCheck version: 1.9.12 (48)
    Report generated 23 June 2014 1:18:32 pm ACST
    Hardware Information:
      iMac (27-inch, Mid 2011) (Verified)
      iMac - model: iMac12,2
      1 3.1 GHz Intel Core i5 CPU: 4 cores
      4 GB RAM
    Video Information:
      AMD Radeon HD 6970M - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software:
      OS X 10.9.3 (13D65) - Uptime: 6 days 18:14:2
    Disk Information:
      WDC WD1001FALS-403AA0 disk0 : (1 TB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 999.35 GB (236.47 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-STDVDRW  GA32N 
    USB Information:
      EPSON USB2.0 MFP(Hi-Speed)
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
      Western Digital My Passport 0748 1 TB
      EFI (disk1s1) <not mounted>: 209.7 MB
      disk1s2 (disk1s2) <not mounted>: 999.83 GB
      Boot OS X (disk1s3) <not mounted>: 134.2 MB
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) Support
      [loaded] com.silex.driver.sxuptp (1.5.1) Support
      [not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
    Problem System Launch Daemons:
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.wdhelper.plist
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    Launch Agents:
      [running] com.Affinegy.InstaLANa.plist Support
      [running] com.epson.epw.agent.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
    User Login Items:
      MyDriveConnect
      MyTomTomSA
      iTunesHelper
      AdobeResourceSynchronizer
      AppTrap
      Belkin Router Monitor
      iTunes
    Internet Plug-ins:
      JavaAppletPlugin: Version: Java 7 Update 55 Check version
      FlashPlayer-10.6: Version: 14.0.0.125 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      AdobePDFViewer: Version: 10.1.10 Support
      Flash Player: Version: 14.0.0.125 - SDK 10.6 Support
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0
    Safari Extensions:
      Ebay Shopping Assistant: Version: 1.1
      Slick Savings: Version: 2.0
      Amazon Shopping Assistant: Version: 1.1
      Searchme: Version: 1.3
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes:
      Flash Player  Support
      Java  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 930.71 GB Disk used: 710.48 GB
      Destinations:
      Time Machine [Local] (Last used)
      Total size: 930.86 GB
      Total number of backups: 36
      Oldest backup: 2014-04-17 23:39:26 +0000
      Last backup: 2014-06-22 09:37:24 +0000
      Size of backup disk: Too small
      Backup size 930.86 GB < (Disk used 710.48 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          1% JavaApplicationStub
          1% PluginProcess
          0% WindowServer
          0% Safari
          0% printtool
    Top Processes by Memory:
      340 MB iTunes
      254 MB com.apple.MediaLibraryService
      229 MB Safari
      184 MB JavaApplicationStub
      57 MB Mail
    Virtual Memory Information:
      23 MB Free RAM
      991 MB Active RAM
      995 MB Inactive RAM
      847 MB Wired RAM
      3.81 GB Page-ins
      151 MB Page-outs

    Launch the Console application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for