My option-scissor function isn't working!

When I use the command to slice the region at equal subdivions, it doesn't work Instead, it slices normally (one slice) even though the little plus sign by the scissor still shows.
Any idea why this might be? I haven't updated anything except QT and iTunes lately.

Okay, it's because the audio file had its anchor point set at the end of the file. It was a reverse cymbal that I use in a template. I keep the anchor point at the end so that the file always climaxes at the beginning of a beat, regardless of the session tempo. I had forgotten that.

Similar Messages

Snapping function isn't working on clips in timeline.

I'm using fcp 7, which I just loaded onto my new iMac and it's behaving differently than it did on my MacBook Pro. The footage (codec apple pro res) looks stuttery, and a few other things are odd, but most bothersome is that the snap function isn't working. No mater how I select, deselect, reselect, it just ain't on. Help?

Either press the Snapping button on the upper right end of the timeline -
or go to the menu View > Snapping to toggle snapping on or off -
or type the letter "n".
MtD

Search Function isn't Working on Specific PDFs in iBooks?

Recently, I have been having problems with the search function in iBooks. I have opened 2 large PDFs in iBooks, the primary reason being to use the search function, and 1 of the 2 PDFs is not coming up with any results for searches. File 'A' ha no problems at all with searching, but file 'B' just comes up with the message "Search Completed No matches found" Note that both PDFs came from the same (clean) website.
Everything is up-to-date on my device (iPhone 5s) iOS Version: 8.2, iBooks Version: 4.1.1. I don't know why the search on this particular PDF Isn't working, as all other PDFs I have in iBooks perform just fine with the search function.
Any help is appreciated!
Thanks

Either press the Snapping button on the upper right end of the timeline -
or go to the menu View > Snapping to toggle snapping on or off -
or type the letter "n".
MtD

Interactive rollover function isn't working in full screen mode.

I've created an interactive document with animation in Indesign CC.
Part of this document has menu bars that change to longer bars when rolled over. I export as an swf and then place that in a separate document to export to pdf. When I open it in Acrobat Pro XI everything works correctly...until I make it full screen. The text and images look fuzzy and low res and the roll over function on the menu bar doesn't work. Unless you click and drag over them, not hover.
Things I have tried:
Changing the document to A3, as it is currently A4 - no change.
Changing the resolution in both flash exporting options and interactive pdf exporting options. I've tried 72 dpi, 96dpi 110dpi (to match the acrobat settings) - still no change.
Have tried both multi state object method of changing the menu bar and a show/hide function - This hasn't made a difference either.
I've had a flick through Acrobat settings but I'm not sure what I am looking for.
The buttons used with the roller also have a on release or tap function to go to a destination as well as the rollover option. I'm not sure if this button having multiple actions might be affecting this as it seems to have no problems handling multiple interactive actions when not in full screen.
Any ideas?
Thanks
Jodie

Hi,
I would like to inform you that you need to use keyboard shortcut V to bring up the select tool (Ctrl-V does not work).
Also, you may try pressing the F8 key to un-hide the toolbar.
Regards,
Nakul

ITunes 11.1.4.62 search function isn't working (Windows 8)

My search function is working, but I am unable to press the grey buttons. For example, I can still search for items in the search bar such as "beyonce" and when I press enter, all songs related to Beyonce show up. But I am unable to click the grey "+" button and the ">" arrow button when searching for a particular title. My problem is similar to this thread: https://discussions.apple.com/thread/5206626
However, when I follow the solution there, the problem still isn't solved. I'm using Windows 8.
Thanks!

I have exactly the same problem after the update yesterday. In addition, I was looking through iTunes preferences and noticed my older devices listed along with my current ones and decided to delete the older devices that were listed.
I wasn't sure if the new "Trust This Computer" that is now appearing on the iPhone 5S and iPad after I connect my lightning connector without any sync occuring was due to my deletion of the older devices listed that somehow contained a backup for my current devices, or due to the 11.1.4.62 update.
After reading the above listing I am guessing the new "Trust This Computer" that is appearing with failure to sync after selecting "Yes" on my iPhone 5S and iPad is due to the iTunes update.
Hopefully this is not just a Windows 8.1 64 bit problem, otherwise I'm afraind it may take a long time to be addressed. It's a little scary to see I am only the second listing making me think this could be a Windows problem.

Adobe Prelude CC Search Function isn't working correctly? HELP!

Hey guys,
In need of some help, I am using the "tag" feature in prelude CC, tagging clips with multiple words IE "Day One, Interview, Ben"
When searching the footage the clips can be seen if I type the words "Day One" or "Ben" however if I type them back to back IE: "Day One Ben" Prelude can't find any footage.
I really need to be able to search for multiple tags/comments at once. Have tried this in Premiere CC and it works perfectly just Prelude isn't.
Has anyone else had this problem or can suggest a fix of how to search for multiple tags/comments.
Thanks,
Nico

Hi -
Prelude currently searches for exact string matches - including punctuation.
We are looking into providing a more capable search engine in the future.
Regards,
Michael

Drag and hover double click function isn't working

Hi people, I have been unable to click hold and drag items into folders and use the double click function when it hovers over.
It just seems to have turned itself off. I have looked at settings and everything is as it usually is. Can't seem to get it working. Didn't occur with any particular software update just stopped working.
Can anyone help get this working again?
Cheers
Olly

Oliver_ Thompson wrote:
Hi people, I have been unable to click hold and drag items into folders and use the double click function when it hovers over.
It just seems to have turned itself off. I have looked at settings and everything is as it usually is. Can't seem to get it working. Didn't occur with any particular software update just stopped working.
Can anyone help get this working again?
Cheers
Olly
It might be a mouse issue.
I suggest rebooting, and if that does not help, reset the PRAM
http://support.apple.com/kb/HT1379

Magnetic function isn't working for iPad Smart Case

I've recently purchased a red colour iPad Smart Case for my iPad with Retina Display (4th Gen) from the Apple Store. However, I have enquiries and troubleshooting about the case:
How do I activate the magnetic function on my iPad? Even the smart case is attached on the iPad, the tablet does not seem to recognize the case.
Does the iPad smart case suppose to have magnets around the perimeter of the case? As the lid does not adhere when I close it.
Much appreciated for the help.

I have the paid AOL accounts, and they were supposed to get back to me today and have not, thus far. It has to be an issue with AOL's email server. The tech that I spoke to over the weekend said that he thought that it may be an issue with their server. Almost 3 weeks ago, AOL's email server was hacked. They said that 2% of their accounts were affected, and one of my AOL accounts was in that 2%. They didn't admit for over a week that it was their server that had been hacked, and instead made everyone affected think that it had been their own computers that had been hacked. I have to believe that this is an AOL issue again. Everything was working fine with my iPhone and my iPad, and suddenly my email was nolonger being pushed on Thurs night/early Friday. If I get an answer from AOL, I will certainly post it here.

I need to restore an external backup on my macbook pro but the "command R" function isn't working at startup. What do I do now?

I've had a bunch of things replaced on my macbook pro, which meant that the hard drive was wiped. I did a full backup on an external hard-drive but now I can't restore it. Apparently I need to press Command and R upon startup (when the grey screen appears) but I've tried this numerous times and nothing happens. Any help would be g

Try restarting holding the option key for the startup manager
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9.5), i7 500GB 16GB RAM iPhone5 iOS8.0.2

Re: My iphoto '11 search function isn't working properly. Advice?

When I search for a photo with a title beginning with 0, I get a huge number of photos that are not related to the photo number I'm searching. I've tried dropping initial 0 from a photo search, but that doesn't help.

The search box at the bottom is strictly a text search. So if you start out your search with 064 any file with 064 associated with it in any way will be displayed, even if the 064 is in the middle or end of the file name. If you add another digit to the search term the photos selected will change.
The iPhoto search doesn't use the Name begins with "XXX" search function.
OT

IMessage is not working on iPad mini. The option of send isn't working. Can't send any msg. What should I do?

The option of send in iMessage in iPad mini appears grey in color. Even though I have written a message. Sending the message is not possible. What can be done?

Good morning
1. Do you have internet access, does Safari bring up a web page?
If you have internet access try this:
A good old fashioned “restart” might do the trick.
Settings -> Messages -> iMessage (OFF)
Turn iMessages on
Reboot your iOS device
A reboot tends to free up memory, help with leaks, etc.
Hold the power key and slide to power off and simultaneously
Hold the power button to power on until the Apple icon appears

My copy and paste functions are not working properly since iOS 8 update

Ever since I updated to iOS 8 on my iPhone 4s the copy and paste function isn't working. It'll work the first time but any time I copy something else it pastes the first thing I copy. The only fix I've found is rebooting the phone but that is a pain to do every time I want to copy something and should be very unnecessary. I updated to 8.0.2 but that didn't fix it.

Have you tried rebooting?

Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?

Why the step-and-repeat function (command+d) isn't working in Illustrator CS5?
I am trying this. Take an object, move it some inches on the right while holding the option key, so I duplicate it.
Usually, I pressed on command+d to duplicate this action on and on (duplicate the object and moving it some inches away), but now it is not working.
any idea?

kwakoo,
It may be time for the list:
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Export Option of Oracle SQL Developer isn't working .

Hi ,
I use SQL Developer for querying Database .
The problem is that after getting data as a result of a Search operation inside Oracle SQL Developer tool , i can't able
to export those Data using export Option of Oracle SQL Developer .
Could anybody please help me on this.

Did Richard answer your question? I'm not clear if Unload isn't working for you
I cant say whether he has answered my question or not , the problem is that , i am using different version of Oracle SQL Developer , that is Oracle SQL Developer 1.5.3 , and there is no such option in that .

Call waiting option isn't working

Im using i6 phone and currently my call waiting option isn't working. I want to know how can I Enable it?

Hey pramodsean,
If your carrier supports call waiting, you can turn it on by going to Settings > Phone > Call Waiting. If the setting is not available, contact your carrier. See this article for reference -
iPhone: Understanding phone features - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

My option-scissor function isn't working!

Similar Messages

Maybe you are looking for