My os is last update restart auto

my os is last update restart auto

Thank you so very much, Niel,
I was so very frustrated.  Now I'm so very happy, thanks to your helpful information.
Blessings to you,
Patrice

Similar Messages

  • Since my last software update the auto rotation on both my ipad air and my iphone 5c won't work. I have tried everything, including; checking the auto-lock - it isn't on lock. I've checked the settings in the Control Centre and they're as they should be.

    Since my last update the auto rotation on both my ipad & my iphone has stopped working. I've done all the usual stuff to correct it but no joy. I've reset, rebooted, turned off then back on, checked all settings including those for the side switch and everything is as it should be except the rotation still doesn't work. There are no open apps, movies or videos that could be locking the screen so I am now totally stumped.
    Any suggestions please?

    The fact that gs.apple.com was in your host file to begin with is an indicator that your computer was used to jailbreak or hack an iOS device at some point in the past. You can not get help here for a hacked or jailbroken device. If your phone was hacked or jailbroken, Apple won't touch it.
    RecBoot and Tinyumbrella are hacking tools.
    Google "iPhone DFU mode".
    Try restoring in DFU mode. If that doesn't fix it, make an appointment at the genius bar and see what Apple has to say about it.

  • My APTV 3 restarts by itself after the last update. plz help me

    Netquark Sep 16, 2014 8:42 AM   
    Hello my APTV 3 restarts by itself after the last update.
    I restore my APTV with pc and it does not work.
    if I unplug the cables after 30 minutes, it works, but once sleep if you restarts the problem comes back. plz help me
    Apple TV

    Did you successfully restore the Apple TV?
    Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • My iMac wont restart after my last update alumni keyboard

    Please help, I am using my MacBook for this, my iMac will not restart after installing the last update, alumni keyboard....., after restarting, pushing the start button, all i see for hours, is the apple logo with the little circle spinning under the logo, please help, i already, disconnected, unplugged everything, used my original keyboard and mouse instead of my bluetooth, but nothing works, even ,power on while pushing option button etc. Anyone else know of this problem.Thanks in advance!

    The long tone is an indication that a firmware update is installing. Do you get a progress bar at the bottom of you screen after letting the power button go?
    Have you reset the PRAM? (cmdalt+PR when you restart the machine)
    Also repair permissions when the machine is up and running.

  • Auto-lock is not working after last update

    After installing the newest IOS update the auto-lock features quit working. It was set to auto-lock after 5 minuets of inactivity, I have reset that to 2 minuets and it still does not auto-lock. If I forget to manually lock it after using it my battery runs down.
    About the same time that I did the IOS update I installed the Printer Pro app from the App Store. I have deleted this app from my IPAD but auto-lock still does not work.

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Odd, but minor, issue after last update

    Hi all,
    A couple days ago, I finally updated OSX from 10.4.7 to 10.4.8, and I think in the Software Update routine there was an Airport update, and several other updates for Logic Pro, iMovie, etc., etc. All were minor updates.
    However, now I have an odd issue. Every time I boot up my Intel iMac, I get a message saying that none of my trusted wireless networks are available, and it asks me if I want to connect to Apple network "xxxxxx" -- of course, the "xxxxxx" that the message refers to is my normal Airport network, so I click yes.
    And that's the end of the issue until the next day, when I boot up the iMac again, and again I get the message. It doesn't seem to effect the actual performance throughout the day.
    This minor issue began immediately after the last update, and only effects my Intel iMac. My G4 iMac, which was updated at the same time, to the same software specs, is unaffected.
    Is this a bug, or is there something I can do to resolve the issue?
    Thanks!
    Kevin

    I heve the same problem. Two laptops and a desktop that used to connect automatically to my WPA protected AEBS. Since 10.4.8 none of them auto connect anymore. They never drop the connection during regular use, nor waking from sleep. But on shut down or restart it will not auto connect.

  • After the last update on Mac os 10.9.2 end of April - I

    After the last update on Mac os 10.9.2 end of April - I opened Pagemaker and my whole system crashed after talkign with Apple, I had to erase everything on my hard drive.  I finally got it fixed and re-installed pagemaker cs5 and a few other program that I HAD to have while I was on vacation.  When I got home, I tried installing CC and various programs (pagemaker, indesign, photoshop etc. Had to erase all of the other adobe programs and start from scratch.  Every time I open ANY adobe products all of my "white space" is pink and white vertical striped in EVERY program. Apple mail, contacts etc.  If I completely shut down the computer and then restart everything is fine until I open an adobe product again.  I can't seem to get any help out of Adobe, does any one have any suggestions before I cancel my subscription entirely?
    Thank you in advance,
    Janie

    You may need to ask for help in the individual program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Since the last updating of the system, my Ipad 2, it won't connect to wifi more than 5 minutes at a time unt

    Since the last updating of the system, my Ipad (model MC769C), it won't connect to wifi more than 5 minutes at a time until I reset the router.  Anyone can help ?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Since last update on Mavericks, the picture attachement to a movie in iTunes no longer works. Any idea ?

    Since last update on Mavericks, the picture attachement to a movie in iTunes no longer works. Any idea ?
    Picture added is not displayed in the finder ; when transfering the movie to an Ipad, it is not displayed either.
    iMac 27', Mavericks 10.9 + iTunes 11.1.2

    Working here just fine. Try reinstalling:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • CD Spanning no longer working after last update

    I was able to burn an audible audiobook that spanned several CD's before the last update, now the burn stops with the first CD and completes. No error, it just burns the first 59 minutes of the playlist.. This is very annoying...
    Mr. House

    Settings > General > Reset > Reset Network Settings.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Why MLB.TV is not appearing after the last update?

    why MLB.TV is not appearing after the last update?

    Make sure the store is set to the US.. Also restart the ATV.

  • How do I revert OS X back to a time before the last update on 28th June?

    Hi.
    Last Tuesday, 28th June, I authorised Mac Update to update two things. One was something to do with my Epson printer, and the other was some sort of security update for Mac OS X itself. The update, presumably the latter part, invoked a requirement to restart my Mac.
    Since then things have not been good.
    I have noticed that the fans in my MacBook Pro are on more or less continuously, even when it is asleep. Prior to last Tuesday they hardly ever ran, even when I was using it. (According to iStat my CPU is currently 76 degrees C, and both fans are running at about 6000 rpm.)
    When I try to quit Safari it doesn't quit straight away as it used to. Instead I get the spinning ball for a while and then, after it quits I get a 'Safari quit unexpectedly' report, even though it was I who initiated the quitting...
    Several apps have been acting oddly too, such as MS Word taking ages to launch.
    So I want to revert my MacBook Pro to how it was prior to this last update. I have Time Machine enabled, but I can't work out how to get the actual OS back to a state it was on a date prior to 28th June. The OS isn't in the Apps folder, and I can't work out where it might be.
    Can someone please point me in the right direction, or is this something that Time Machine cannot do?

    Your slow down issues sound like it's internet related.
    http://support.apple.com/kb/TS3802
    Under your System Prefs > Network > Advanced > Airport > TCP/IP  Configure IPv6: OFF  Reboot.
    Run ALL of the free OnyX cleaning and maintainence
    features and reboot.
    Also run the Verify>Preferences and write down any corrupted
    ones, move these files to your desktop (out of yourLibrary/
    Preferences folder) and reboot, they get rebuilt automatically.
    (more free good stuff you'll likely wind up needing)
    VLC (plays anything)
    Perian (installs additionalQuicktimecodecs)
    FlipForMac (Windows media in Quicktime)
    TheUnarchiver(unpacks just about everything)
    Carbon Copy Cloner (clonesbootdrive to another HFS+j drive, hold option bootable)
    2 free 3D games - NexiuZClassic and Cube 2 Sauerbraten
    LibreOffice (freeofficesuit, reads/writes Office files
    Gimp (free image editor)
    OnyX (free maintainenceandcleaning)
    Pacifist (opens DMG filesforextraction)
    Mactracker (inforonApple products)
    NTFS Mounter (for WindowsNTFSdrives)
    EasyFind(deep search)
    TimeMachineEditor
    TinkerTool
    ClamXav (free anti-virus)
    Caffine (keeps yourMacawake)
    Browswerplug-in check (especially for Flash!)

  • Since last update (today) I get invalid password when trying to use back to my MAC, password works everywhere else

    since last update (today) I get invalid Apple ID password when trying to use back to my MAC in Icloud app on my MAC, password works on all my other devices. GLITCH ?

    Try going to the Apple ID page on your web browser
    http://www.apple.com/support/appleid/
    and try to either retrieve or reset your password
    (obviously you had to be able to successfully log in to be able to post here)
    I was finally able to log in through my system preferences after about three or four hours. I ran a disk utility to repair permissions and restarted and it seemed to work ok.

  • Last update does not work with Ford Sync with Applink

    Spotify has been working all right with the Ford Sync with applink in my car (C-MAX, late 2014). However, with the last update of the Spotify app from Play Store, just a few days ago, it has stopped working, because it is not detected by the car. Even when manually searching for applink enabled applications, it can't be found. It' really a pity, because it had worked perfectly until now, and it is a really impressive feature which I would definitely like to use again.
    My phone is a Samsung Galaxy S3 mini, with Android 4.3 and the latest version of the Spotify app (2.2.0.636). I am a premium user from Spain.
     

    Our current situation is that my wife's phone connects via the AppLink to Spotify and shows track listings but doesn't allow shuffling or playlists to be displayed, she controls it via the phone if she wants to change playlists. My phone has connected once since I first posted to Spotify which came up with "Spotify powered by Ford" on my phone screen and allowed me to do absolutely everything you desired via the Spotify AppLink and "froze" all interactions directly with the phone, absolutely everything!!! Now it is back to not even detecting Spotify so have to connect via BT Audio. It has been like this for several months now however the most recent update (last week?) means that I now get track info up on the display! Twice however the display showed the first track only and once that finished and the next began, the display still showed the original track. Ironically at the same time, our 2010 Focus also began showing the correct track info on the display, this is the first time in the whole 5 years we've owned the car that my phone has displayed track info on the Focus, my wife's phone has always done it! I have found out that although we both have Samsung S3s that we got via carphone warehouse on the same day, hers is always one software update behind mine so never has the most recent OS. Strangely though, when I last updated my OS she also had notification to upgrade, she did, and she still is one behind me! I think there is something far more sinister in all of this but at least I get my tunes in the car, if not in the most desired way.
    My overall opinion is that it is a great system if you have the right OS/phone it works great (I know someone with a 2015 model having the same issue with their i-Phone) however the continuing upgrading of OS and App means that the system isn't always compatible and never will be until they allow auto-upgrading via the Bluetooth connection and therefore phone internet connection in the UK. Apparently the US models all allow you to download the most recent software for the radio onto a USB stick and just plug it in to upgrade. Annoying.

  • I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

    I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Maybe you are looking for