My "other" data level is over 7gb!

I have an iPhone 4 (14GB total) that's storage space is beginning to max out. When I connect it to iTunes, it says that 7.1GB of the space is in "other". I added up all the apps and data values of the underlying apps in the Settings>General>Usage and get 5.4GB, but that includes 3GB of music and 1GB of apps that are separated from "other" on my iTunes bar.
I do have 3 email accounts Yahoo, ATT, and work through Mobiletron, but cannot tell how much of the data is from emails. I did reduce the duration of emails by 50% to be retained and it had no effect on the data usage.
I went to the Genius bar and was told to delete the podcast and restore the iPhone ios. I deleted all podcasts, but it only reduced the total by 750MB. The restore did not seem to help too much.
Over half of total space is not taken by other and I am slowly running out. Any ideas of how to tell what is using the space or a more complete way to remove this data? I have also purged my history but with no real change. I am down to 1GB of open space left.
Any help would be greatly appreciated.

Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup...
But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup...
Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone

Similar Messages

IPod touch won't sync, Other Data keeps increasing

iTunes version 12.0.1.26
iPod iOS 8.1.2
I received a new 64GB iPod touch this Christmas. I've had several issues with it, but they were mostly just irritating and not actually stopping me from using the iPod (can't make new playlists on iPod itself, for instance). However, I've now had to restore the iPod twice in 2 days after the Other Data grew to over 26GB and I couldn't edit my music or podcasts at all. As near as I can tell, after the initial sync to iTunes any changes to the music on the iPod result in new Other Data. It's like the iPod is deleting my access to the music but not deleting/overwriting the actual files. So each time the iPod tries to sync to the computer and update any changes, it just adds on to the existing files and quickly runs out of space. Each time I try the various tricks I've found online that are supposed to force iTunes to recalculate data usage, it just increases Other Data. Even just changing from automatic to manual syncing causes it to double the "used" space. I can't add anything new to the iPod, it just stays greyed out and stuck on either step 4 or 5 of the sync, saying it's waiting for the changes to take effect.
Right now I'm trying another restore and hoping to get everything added on before it can decide it's out of space (data bar shows 9.44GB free, with all music, audiobooks, and podcasts accounted for), and I already have over 700MB of Other Data.

If you only restored from backup try restoring to factory settings/new iPod.
If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to get rid of 'other' data

I have masses and masses of 'other' data on my iphone. I have stripped it of all music (500 songs) and it has made no difference. I understand the data is most likely old apps etc not deleted properly, like a ghost trail. I have deleted all unnecessary texts, voicemails, calls, photos, internet history, etc. I have nothing left to delete data-wise. Does anyone know how to get rid of this 'other' data? It was literally taking 6.8gb of my 8gb phone, i have halved that by checking and unchecking 'automatically sync' in itunes, but still can't shift the rest. Really slowing my phone down

Most of the "other data" on my phone is the forced IOS 7 upgrade from Apple.
They push the upgrade(around 850 mb) and also reserve another huge chunk of space on the phone to do a backup and install on the phone (mine is about 2.5 gigs after some manipulation).
If you do not want the upgrade, it just sits there on the phone.
You can not remove it.
Apple will not sign and allow you to restore IOS 6 to your IOS 6 phone.
If you ever need to do a restore of the OS, you will be forced into IOS 7.
When a new upgrade is pushed to your phone, the amount of confiscated storage will accumulate with each subsequent release.
Apple can't be bothered to delete the older/outdated upgrade file being replaced by the new, hence the "other data" just grows over time. I have seen mine get to almost 6 gigs.
You can use Itunes on your computer to "download only/ not install" the newest update, then do a restore of your data and a sync. This appears to remove all the outdated updates from the phone.
You will however, still have about 2 gigs of your storage space still hijacked by Apple to store the most recent forced upgrade.
I am still on IOS 6 and plan on sticking with it simply for personal preference and vision reasons, as that is my prerogative.
It does perplex me why Apple refuses to make IOS 7 optional for users that have always had IOS 6. I can fully understand insisting that new devices run IOS 7, and obviously many IOS 6 users would have jumped anyway.
Apple needs to add an asterisk to word *adoption rate of IOS 7 in their corporate guidance statements.
They knowingly mislead given the current reality that ultimately no one can opt not to adopt it.
Hotel Cupertino, "You can check out, but you may never leave"

When I sync my iPhone to itunes it shows over 7GB of "other" files.

My phone has been showing a "full" status and when I synced it I saw that no matter how many songs and apps I deleted, the "other" category kept growing. My brother told me about a trick to swipe the "music" section in the "about/ usage" setting and this seemed to get rid of the "other" but it also seemed to mess up my music player app- it keeps skipping through my songs.
I have attempted to fix it using this again but it has not worked. I have over 7GB of "other" files, my voice memos are no longer on my playlist despite selecting it to sync. I also seem to have lost over 200 songs which will not sync. I have only ever purchased music via itunes.
My phone continues to warn me that it is full but I do not know how to get rid of the "other" category. I am surprised to find out that apple charges $35 to get support. Wow.
Any help on this would be great, because I seem to have lost access to my music, I've lost important voice memos, my music app is not playing properly, and my phone continues to warn me that it is full.
Thank you.

I should mention that I also did a restore hoping that would solve the problem but it did not, and it was after this that I lost some of my music.

How can I delete over 3GB of "other" data?

So my iPhone 5 is a 16GB (or 13.3GB I believe, thanks apple) and it says I've used 3.37GB of this mysterious "other" data.
I have been going through and reading other people's responces to similar questions, and it seems like the main conclusion is to back up my iPhone, either to iCloud or my computer, and restore it as new. I've been trying to do everything but this, because I don't want to lose the data like my contacts and notes, but I cannot back up my phone because I have used too much space to back up, and I'm not going to buy extra space just to back up my phone to delete this data. Clearly one of Apple's problems they have yet to fix, unless they are doing this to make you buy more space and they can get more money. Regardless, we all get over that flaw in their products.
Another popular responce I was getting was to go to Settings > Safari > Clear Cookies and Data and proceeding through with that. Of course, wanting to get my "other" data back down to the regular amount (under 1GB) I did clear the cookies and data, as well as cleared my history (which is right above the Clear Cookies and Data option), however I am still stuck with over 3GB of other.
In responce to almost all of these posts was something about your apps. I have three apps on my phone, and I had deleted them off my phone to try and free up space. Honestly, I don't even think I got half of a GB back from deleting the apps. I understand that my phone is now made up of photos and corrupt files. But how do these corrupt files even get created? If I can somehow stop them from being created in the future, believe me, I will do so.
I have gone and deleted my text messages and emails, since people say that the space is taken up mostly by SMS and MMS messaging, and I think that got me almost 1GB of space. I did this last night, before I plugged my phone into the computer and checked the "other" amount on iTunes. Is there an alternative to restoring my phone as new to delete this data? Can someone please tell me if there is, because I'm just getting fed up with having to constantly delete things off of my phone to open up more space.

You should be importing pictures from the camera roll to your computer on a regular basis. Even if you don't want to keep them, at the end of the import, most photo managers give you the option to delete the photos from the camera.
If you're using a PC running Windows, just plug the phone in. Open Windows Explorer. You should see the phone there, and under that, the DCIM folder where the photos are stored.
Transfer them if you want to keep them or just delete them.
There is no easy way to mass delete them on the phone itself.

My iPhone 4s will not back-up because it is over capacity due to a lg. amt. of "other" data. I don't have a lot of other data however. How can I correct this?

My iPhone 4S will not do a back-up because it is over it's capacity due to an excessive amount of "other" data. However I actually have very little other data. How can I correct this. As it is now I can't even take a picture! Thanks!

Create a manual backup in iTunes, then restore it, restoring to your iTunes backup at the end. This will usually correct this. If it doesn't, then the problem is contained in the backup and you'll have to save as much of your data as you can, then restore it as new without using your backupo.

What is "Other" data in iTunes for my iPhone? And why is it over a GB?

In iTunes, my iPhone reports I have 1.6GB of "Other" data. It appeared immediately after I deleted and unsubscribed from a podcast (via iTunes) which had 24 large videos, and then sync'd with my iPhone (which was running out of space).
The podcasts appeared to be removed from my iPhone, however I still had no space and I saw that now I had this 1.6GB of other stuff.
I had a look around for answers on this and the default answer given is "restore your iPhone". So I did a backup and then did a restore to that backup. I don't have an earlier backup (except one that's from last year) and I really don't want to lose my app data and settings.
The restore didn't remove the 1.6GB of data.
So the question is, am I right in assuming the 1.6GB of other data is the left over podcasts that are now corrupt somehow? Or is it something else? i.e. What constitutes "other" data?
Second, any other ideas how to get rid of that other data?
Thank
Boz

wjosten wrote:
Other that large is corrupt data. Normally, a restore from backup fixes things.
So, I discovered something new about iTunes today. The "Restore from backup" context menu option that appears when you click your iOS device in the Devices tree on the left of iTunes, is different from the "Restore" button that you get on the Summary tab for your device.
"Restore from backup" just does an restore from backup. Whereas the Restore button does a restore and then restore from backup. Make sense? Hmm.
This distinctly different functionality is not clear to the user, indeed the advice I was given above was to "Restore from backup", which in this instance is not what is needed to clear out the "Other" data.
In summary, to fix my problem I:
- performed a complete Backup (from iOS Device context menu)
- performed a Restore (clicked Restore button on Summary tab)
- after device is reset with latest iOS software, chose latest backup
My other data shrank to 0.2Gb, and as an added bonus another 1.4 GB of other space was freed up from Apps and Video, even though I can't find anything missing, so I suspect there was other non-"Other" data that was cleared out by this procedure.
Boz

What the advantages of having an BAPI over Other data migrations

What the advantages of having an BAPI over Other data migrations

Th advantages of BAPI
1. Simple to use (its just an FM)
2. Not cumbersome like bdc
where we have to record each and every screen
sequence.
3. SAP guarantees the consistency
of bapi in future releases.
One of the big plusses for BAPIs is that the interface and function are not supposed to change. This is a big plus when you do upgrades or hot packs because the transaction can change (format, required inputs etc) which means you then need to update the call transaction.
Some of the BAPIs are better documented and easier to use than others.
You usually need to perform the BAPI that actually does the COMMIT after you call your BAPI.
The Program coding for calling a BAPI is usually cleaner than setting up the screen flow etc for the Call Transaction.
You don't need to worry about special data circumstances interrupting the normal data flow of the screens and causing errors because of that.
BAPIs probably have better performance since they don't do the screen flow processing.
In general if the BAPI exists for the transaction you want to perform and you can figure out how to use it the BAPI is probably the best way to go.
This is just from my experience working with both BAPI and Call Transaction. I have had some very good successes with BAPIs, but very occasionally found that I could not get the BAPI to perform the update I needed.
Refer the transaction BAPI for detail information.
You can also refer to below links:
http://www.sapgenie.com/abap/bapi/example.htm
Basic learning guide:
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
BAPI intro:
http://www.sappoint.com/abap/bapiintro.pdf
Overview:
http://www.planetsap.com/Bapi_main_page.htm
Also have a look at the following link :
http://www.planetsap.com/LIST_ALL_BAPIs.htm
Go through the following Document
Bapi to create customer master
BAPI_CUSTOMER_CREATEFROMDATA
BAPI_CUSTOMER_CREATEFROMDATA1
Or you can use FM SD_CUSTOMER_MAINTAIN_ALL
what is BAPI?
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values,
for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved
and returned to the calling program.
The instance is identified via its key.
The BAPI GetDetail() is an instance method.
BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed
so that they can be called several times within one transaction.
For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction,
the second BAPI call must not affect the consistency of the sales order 2.
After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type,
for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type,
for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database
or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type.
The instance to be cancelled remains in the database and an additional instance is created
and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst!
ance and the BAPI and Remove<subobject> removes a subobject from an object instance.
These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Please check out this thread..
Re: bapi
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
Java Connector(JCO) can call not only BAPI's but also the function modules which are remotely enabled..
BAPI's as i said earlier are remotely enabled function modules..
Hence, JCO can call also BAPI's(n not only BAPI's as u mentioned).
Check the following BDC over BAPI
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit
so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.

I have an iphone 4s, and it is telling me that my "other: data is over 2 gb

i am having a problem with the other data section in my phone. its over 2 gigs, and no matter what i do, it stays that way. i've synced the device, restored the device, and all the other little tips that i found here on the forums. so, should i set it up as a new phone as the next step after restoring it once again? will that have me lose all my saved data?

Backup, then restore should sort you out. A certain amount of "other" is normal. I currently have just under 1Gb on my iPhone and a little over 2Gb on my iPad. It's not absolutely clear what goes into other, but it could include data associated with apps, email, contacts, your camera roll etc. Having restored your iPhone you could try deleting all media and all apps that don't have any data you care about. If you can export the data associated with an app and back it up independently then do so (NOT GarageBand projects if you have a PC as they cannot currently be restored) then you can remove that app too. This should get your device as lean as possible. You could then repeat the backup restore cycle before replacing your other apps and media which would hopefully result in less other being used.
tt2

I have an iphone 5s, When i checked for the avialable space it said i had over 3Gb of "Other" files in my iphone. I'v only had my iphone for three days, is it normal to have that much "other" data?

I have an iphone 5s, When i checked for the avialable space it said i had over 3Gb of "Other" files in my iphone. I'v only had my iphone for three days, is it normal to have that much "other" data?

Around a gig is normal.
Also, if you tend to send/receive a lost of MMS messages, that will cause other to increase. Especially if you keep those messages.

My harddrive data is consumed by over 72% "Other" data.

I've looked intensively at Pondini's tips and used them to check, but nothing is clearing the "Other" data. I have no room - 87.41 out of 120.47 consumed by "Other". Macbook Air, OS X 10.7.5, 120.47 GB. The data that takes up the majority of space on my harddrive is Apps, 7.24 GB; no data store is larger than that, or even close. I have many documents, but not enough to warrent this immense amount of "Other" data. I don't use Time Machine, and I don't have any backup on this computer. I'm concerned something is wrong, at this point.

Applications -> Utilities also contains apps.
Any 3rd party application you have stored somewhere else because you dragged and dropped it from a .dmg you downloaded, is still an app.
Apps are basically directories where the name ends in .app (technically the contents of the .app named directory has to have the guts of a real applications, but Mac OS X uses a directory named .app as the convention for storing an application).
You the Applications -> Utilities -> Terminal command:
find / -type d -iname '*.app'
to find all the .app files on your Mac
You can use a utility such as OmniDiskSweeper to find where all your storage is being used on your Mac
<http://www.omnigroup.com/more>
<http://www.macupdate.com/info.php/id/7402/omnidisksweeper>
DO NOT delete files in your Home Folder -> Library tree as there are things like your iPhone backups, your email messages, your application preferences, etc...
DO NOT delete files outside your home folder, as you may end up deleting something essential to Mac OS X, and turn your Mac into an expensive “Door Stop”.
I will point out that you will find some very large files in private -> var -> vm (these are the Mac OS X virtual memory paging files and where Mac OS X stores the copy of RAM when your Mac is put to sleep). The page files get deleted on reboot, and the sleep image is just going to be created again when you put your Mac to sleep.
If you think you have found something to delete outside your home folder, it would be best to ask first before deleting. There are many examples of people deleting files outside their home folder, or renaming files, or changing the ownership or permissions of files, and then their Mac stops running. Do not be one of those people. Ask first.

My "other" data is over 4 GB!

I have 4 GB of "other" data and I have been trying to figure out how to get rid of it and nothing is helping. I have deleted unused apps, cleared my cookies and data on safari, etc. I only have 1 GB left and it is getting one my nerves.
I have iOS 7.0.6 but I will be updating to 7.1 soon.(Saturday)

Texas Mac Man post (2/10/2012) on "Other" data on iOS device - https://discussions.apple.com/message/19861751
https://discussions.apple.com/message/20053939 - "If it is much more than a gb or so, then it indicates corrupt files. A restore should resolve." "If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup." - https://discussions.apple.com/message/20054011

Data level Security issue in obiee 11g

Hi,
We are trying to implement data level security, let me explain the issue
The requirement is, we have 7 schools and each school has one principle , there will be a Superdintent who has 3 schools under him. so now when each principle logs in to dashboard we have a prompt for school i.e Name of school in that prompt he should see only his school and even the data of that school only which are assigned to him, now when Superdintent logs in he should see all 3 schools in the prompt and data. I have gone through this link (http://www.rittmanmead.com/2012/03/obiee-11g-security-week-row-level-security/) but could not achieve.
We are able to achieve by writing SQL in BMM layer ( LTS Table) so where ever the table is used in dashboards the security is being applied and we are able to see what we want. We want to achieve this by application role, But when we are creating session variables and applying on Application Role its not working. We want to achieve this by using Application role because suppose in other dashboards when the table is not used or pulled in, it will not work.But if we do it using application role its applies to all dashboards and data is resticted. so that when principle or Superdintent logs in automatically its restricts the data.
Below is the SQL which we used in BMM LTS, its working fine. But when the same SQL is applied in Application Role it's not working.
SQL used in session variable -
select 'SCHOOL_CD1', school_cd1 from w_staff_d where empl_id ='VALUEOF(NQ_SESSION.USER)'
and job_desc1 = 'Principal High School - KPI'
Any suggestions please ??
Thanks,
VRP

Hi,
I pasted the log view below by applying SET VARIABLE LOGLEVEL=2, DISABLE_CACHE_HIT=1;, ran this report by applying SQL in Session variable. Let me know if you want anything -
Thanks
[OracleBIServerComponent] [TRACE:2] [USER-0] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] ############################################## [[
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/Key Performance Analytics/Analysis/Climate and Culture/Analysis for total school suspensions',LOGLEVEL=2, DISABLE_CACHE_HIT=1; SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10, s_11 FROM (
SELECT
0 s_0,
"High School KPI"."- Date"."School Year" s_1,
"High School KPI"."- Grade"."Grade Level" s_2,
"High School KPI"."- School"."School Name" s_3,
"High School KPI"."- School Suspensions"."% of Students Suspended" s_4,
"High School KPI"."- School Suspensions"."Count of Students Enrolled" s_5,
"High School KPI"."- School Suspensions"."Count of Students with Incidents" s_6,
CASE WHEN (CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END +(CASE WHEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END)=0 THEN CASE WHEN CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END <0 THEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END *-1) ELSE CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END END ELSE (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END) END /10))<0 THEN 1 ELSE 2 END s_7,
CASE WHEN (CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END)=0 THEN CASE WHEN CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END <0 THEN (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END *-1) ELSE CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END END ELSE (CASE WHEN MAX("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END - CASE WHEN MIN("- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY )END) END s_8,
CASE WHEN MAX("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 10 ELSE MAX("- School Suspensions"."% of Students Suspended" BY ) END s_9,
CASE WHEN MIN("High School KPI"."- School Suspensions"."% of Students Suspended" BY ) IS NULL THEN 0 ELSE MIN("- School Suspensions"."% of Students Suspended" BY ) END s_10,
REPORT_AGGREGATE("High School KPI"."- School Suspensions"."% of Students Suspended" BY "High School KPI"."- Date"."School Year") s_11
FROM "High School KPI"
WHERE
(("- Discipline Action"."Discipline Action Code" = 'Suspension') AND ("- Date"."School Year Desc" = VALUEOF("school_year_desc")))
) djm ORDER BY 1, 2 ASC NULLS LAST
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-23] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- General Query Info: [[
Repository: Star, Subject Area: High School KPI, Presentation: High School KPI
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- Sending query to database named SPA (id: <<62064>>), connection pool named Initialization Block Connection Pool: [[
WITH
SAWITH0 AS (select T30351.SCHOOL_YEAR_DESC as c2,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T29835.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30351.SCHOOL_YEAR_DESC, T29835.STDNT_WID ORDER BY T30351.SCHOOL_YEAR_DESC DESC, T29835.STDNT_WID DESC) as c7
from
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_SCHOOL_YEAR_D T30351 /* KPI_W_SCHOOL_YEAR_D */ ,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_ENROLL_SCHOOL_F T29835 /* KPI_W_STDNT_ENROLL_SCHOOL_F */
where ( T26564.GRADE_LEVEL_WID = T29835.GRADE_LEVEL_WID and T26686.ORGANIZATION_WID = T29835.ORGANIZATION_WID and T29835.SCHOOL_YEAR_WID = T30351.SCHOOL_YEAR_WID and T30351.SCHOOL_YEAR_DESC = '2011-2012' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH1 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
D1.c2 as c2,
count(distinct D1.c6) as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH0 D1
group by D1.c2, D1.c4, D1.c5),
SAWITH2 AS (select sum(D1.c1) over (partition by D1.c2) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH1 D1),
SAWITH3 AS (select T30647.SCHOOL_YEAR as c3,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T26023.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30647.SCHOOL_YEAR, T26023.STDNT_WID ORDER BY T30647.SCHOOL_YEAR DESC, T26023.STDNT_WID DESC) as c7
from
W_DISCIPLINE_ACTION_D T29975 /* KPI_W_DISCIPLINE_ACTION_D */ ,
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_KPI_QTR_DAY_D T30647,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_DISCIPLINE_F T26023 /* KPI_W_STDNT_DISCIPLINE_F */
where ( T26023.DISCIPLINE_ACTION_WID = T29975.DISCIPLINE_ACTION_WID and T26023.ORGANIZATION_WID = T26686.ORGANIZATION_WID and T26023.DATE_WID = T30647.DATE_WID and T26023.GRADE_LEVEL_WID = T26564.GRADE_LEVEL_WID and T29975.DISCIPLINE_ACTION_CD = 'Suspension' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH4 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
count(distinct D1.c6) as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH3 D1
group by D1.c3, D1.c4, D1.c5),
SAWITH5 AS (select sum(D1.c1) over (partition by D1.c3) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH4 D1)
select distinct case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end as c1,
case when D1.c4 is not null then D1.c4 when D2.c4 is not null then D2.c4 end as c2,
case when D1.c5 is not null then D1.c5 when D2.c5 is not null then D2.c5 end as c3,
case when D1.c3 = 0 then NULL else D2.c2 * 100.0 / nullif( D1.c3, 0) end as c4,
D1.c3 as c5,
D2.c2 as c6
from
SAWITH2 D1,
SAWITH5 D2
where ( nvl(D1.c2 , '1') = nvl(D2.c3 , '1') and nvl(D1.c2 , '2') = nvl(D2.c3 , '2') and nvl(D1.c4 , '1') = nvl(D2.c4 , '1') and nvl(D1.c4 , '2') = nvl(D2.c4 , '2') and nvl(D1.c5 , '1') = nvl(D2.c5 , '1') and nvl(D1.c5 , '2') = nvl(D2.c5 , '2') )
order by c1, c2, c3
[2012-10-17T18:36:55.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-18] [] [ecid: c9928ce086f2ff4f:4405c138:13a559973e0:-8000-000000000000f7e9] [tid: 128c] [requestid: 5e40000b] [sessionid: 5e400000] [username: weblogic] -------------------- Sending query to database named SPA (id: <<62434>>), connection pool named Initialization Block Connection Pool: [[
WITH
SAWITH0 AS (select T30351.SCHOOL_YEAR_DESC as c2,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T29835.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30351.SCHOOL_YEAR_DESC, T29835.STDNT_WID ORDER BY T30351.SCHOOL_YEAR_DESC DESC, T29835.STDNT_WID DESC) as c7
from
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_SCHOOL_YEAR_D T30351 /* KPI_W_SCHOOL_YEAR_D */ ,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_ENROLL_SCHOOL_F T29835 /* KPI_W_STDNT_ENROLL_SCHOOL_F */
where ( T26564.GRADE_LEVEL_WID = T29835.GRADE_LEVEL_WID and T26686.ORGANIZATION_WID = T29835.ORGANIZATION_WID and T29835.SCHOOL_YEAR_WID = T30351.SCHOOL_YEAR_WID and T30351.SCHOOL_YEAR_DESC = '2011-2012' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH1 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
D1.c2 as c2,
count(distinct D1.c6) as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH0 D1
group by D1.c2, D1.c4, D1.c5),
SAWITH2 AS (select sum(D1.c1) over (partition by D1.c2) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH1 D1),
SAWITH3 AS (select T30647.SCHOOL_YEAR as c3,
T26564.GRADE_LONG_DESC as c4,
T26686.SCHOOL_NM as c5,
T26023.STDNT_WID as c6,
ROW_NUMBER() OVER (PARTITION BY T30647.SCHOOL_YEAR, T26023.STDNT_WID ORDER BY T30647.SCHOOL_YEAR DESC, T26023.STDNT_WID DESC) as c7
from
W_DISCIPLINE_ACTION_D T29975 /* KPI_W_DISCIPLINE_ACTION_D */ ,
W_GRADE_LEVEL_D T26564 /* KPI_W_GRADE_LEVEL_D */ ,
W_KPI_QTR_DAY_D T30647,
W_ORGANIZATION_D T26686 /* KPI_W_ORGANIZATION_D */ ,
W_STDNT_DISCIPLINE_F T26023 /* KPI_W_STDNT_DISCIPLINE_F */
where ( T26023.DISCIPLINE_ACTION_WID = T29975.DISCIPLINE_ACTION_WID and T26023.ORGANIZATION_WID = T26686.ORGANIZATION_WID and T26023.DATE_WID = T30647.DATE_WID and T26023.GRADE_LEVEL_WID = T26564.GRADE_LEVEL_WID and T29975.DISCIPLINE_ACTION_CD = 'Suspension' and (T26564.GRADE_LONG_DESC in ('Grade 10', 'Grade 11', 'Grade 12', 'Grade 9')) and (T26686.SCHOOL_NM in ('Central Sr', 'Como Park Sr', 'Harding Sr', 'Highland Park Sr', 'Humboldt Secondary School', 'Johnson Sr', 'Washington Technology Secondary')) ) ),
SAWITH4 AS (select count(distinct case D1.c7 when 1 then D1.c6 else NULL end ) as c1,
count(distinct D1.c6) as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH3 D1
group by D1.c3, D1.c4, D1.c5),
SAWITH5 AS (select sum(D1.c1) over (partition by D1.c3) as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5
from
SAWITH4 D1),
SAWITH6 AS (select case when max(D1.c1) = 0 then NULL else max(D2.c1) * 100.0 / nullif( max(D1.c1), 0) end as c11,
case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end as c12
from
SAWITH2 D1,
SAWITH5 D2
where ( nvl(D1.c2 , '1') = nvl(D2.c3 , '1') and nvl(D1.c2 , '2') = nvl(D2.c3 , '2') and nvl(D1.c4 , '1') = nvl(D2.c4 , '1') and nvl(D1.c4 , '2') = nvl(D2.c4 , '2') and nvl(D1.c5 , '1') = nvl(D2.c5 , '1') and nvl(D1.c5 , '2') = nvl(D2.c5 , '2') )
group by case when D1.c2 is not null then D1.c2 when D2.c3 is not null then D2.c3 end )
select D2.c11 as c1,
D2.c12 as c2
from
SAWITH6 D2
order by c2
Edited by: 965968 on Oct 17, 2012 11:49 AM

How to Limit the Displaying of Data Using PointTheme over the map

Hi,
I have the following requirement, which i'm trying to implement with <dvt:map & <dvt:PointTheme components.
*The requirement is ... I have a base map, which is being accessed via <dvt:map component. And i'm using point theme to display certain data over the map. Let us consider, over the US map ... i'm displaying 24 points(for each polygonone point .... taking the centroid of each polygon) when the map zoom level is 0.
At this zoom level '0', user can see all 24 points. But when the user start clicking on '+' to Zoom In(Now the zoom level is '1'), at this zoom level user can see only 18 points. User can see the remaining 6 points by dragging the base map to either sides.
This mean, irrespctive of the zoom level the point theme is rendering the all the points over the map. Instead, i would like to display the data specific to the polygons that are visible to the user. At zoom level '0', if the user is able to see all the polygons, then display all 24 points. And at zoom level '1'...if the user is able to see 18 polygons and then display only those 18 points. And if the user tries to see the other polygons data ... user may drag the base map either sides. In that case, the point theme should render data specific to the polygons that the user is able to see.
Similarly, if the user is at zoom level '2'...at this zoom level user is able to see 13 polygons over the IE. so the point theme should render only 13 points specific to each polygon. If the user tries to do dragging the base map either sides...then display the points, specific to the polygons that the user is able to see.
Similarly for other zoom levels ... Please let me know if you require any other information.
Thanks & Regards,
Kiran Konjeti

You'll need to do a little software workaround on the values you read from your counter. But first a little tutorial to explain *why*.
The E-series boards use 24-bit counters. When LabVIEW requests an integer count value, the count is returned in a 32-bit unsigned integer datatype, where the 24 lowest bits represent the value in the board's count register. The upper 8 bits are *always* 0's.
The count register can increment from 0 to 16 million plus (2^24 - 1), then it must "roll over" back to 0 again just like an odometer. Similarly, when it decrements past 0, it next goes to the max value of 2^24 -1 as you observed.
So we need a little software workaround that'll convert (2^24 -1) to (-1) and (2^24 -2) to (-2), etc. The way to do it is to first detect whether the highest bit is a 1. One way is to compare whether the count value is >= 2^23, making sure to use integers to do the comparison. Whenever the value is >= 2^23, subtract 2^24 from it to create your new count value which will then decrement 3,2,1,0,-1,-2,-3, etc. as desired.
Here's a link to a similar explanation. Couple more notes too. First, if this is a continuously rotating encoder, you may still encounter a discontinuity when the revised count value crosses the +/- 2^23 boundary. Second, direct connection of a quadrature encoder to an E-series board isn't recommended because of unrepeatability when measureing direction changes.
-Kevin P.

I have 60GB other data after updating to iOS 8.1, how do I get rid of it?

I updated my iPhone 6 to iOS 8.1 last week and now I have 60GB "other" data on my 128GB phone. WTH? How do I get rid of it?

Hmm, I did receive an email saying that the thread was deleted, but did not explain why for some reason. It sounds like the Level 7 guy caused this. I will call Apple tomorrow to find out who is responsible. And see if I can lodge a complaint against that user. Maybe it was because of what the Level 7 guy was saying.
There was useful information posted in that threat that addressed the issue that I am experiencing. I will try to reiterate from the apple website, it says.
Recovery mode
If you've never synced your device with iTunes, or haven't set up Find My iPhone, you'll need to put your device in recovery mode. Then you'll restore your device as new or from a backup.
This will erase the device and its passcode.
Disconnect all cables from your device.
Hold down the Sleep/Wake button, then "slide to power off" to turn off your device.
Press and hold the Home button and plug the device into your computer. If your device doesn't turn on automatically, turn it on. Don't release the Home button.
Continue holding the Home button until you see the Connect to iTunes screen.
If iTunes doesn't open automatically, open it. iTunes will alert you that it has detected a device in recovery mode.
Click OK. Then restore the device.
If your device doesn't go into recovery mode, try steps 1–4 again.
They suggested that I try this over again until it works. It did not work for me the first time.

My "other" data level is over 7gb!

Similar Messages

Maybe you are looking for