My outgoing calls are blocked from Southern Ireland how to unblock
My outgoing calls are blocked from irelandneed to unblock them
Hi ,
Welcome to the community.
What phone are you using?
What network are you on EE/T-Mobile/Orange?
And last question are you on contract?
If you could reply with this, I will try andf get you sorted to make calls in Ireland .
Thank you.
Similar Messages
-
My outgoing calls are block, how do I correct this?
My outgoing calls are blocked, how do I correct this on my 4S?
Settings > Phone > Show My Caller ID > Show My Caller ID > On.
-
Trying to do smartserve on line, pop ups are blocked, don't know how to unblock them
How do I unblock pop ups
See this: <br />
https://support.mozilla.com/en-US/kb/Pop-up%20blocker#w_pop-up-blocker-settings -
Incomng and Outgoing calls are stop routing every five min
Dear Team,
Please find the attached running config and logs.Incoming and outgoing calls are landing on the gateway properly. But call stop working every five min.PRI is up and no error on controller E1.
Please advise how to identify the issue?
CUCM version 4.2
debug isdn q921
*Sep 2 08:48:21.874: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=2 nr=34
*Sep 2 08:48:21.890: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=3
*Sep 2 08:48:21.942: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=34 nr=3
*Sep 2 08:48:21.942: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=35
*Sep 2 08:48:27.866: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=35 nr=3
*Sep 2 08:48:27.866: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=36
*Sep 2 08:48:34.322: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=36 nr=3
*Sep 2 08:48:34.322: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=37
*Sep 2 08:48:34.326: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0503726912 N/A
*Sep 2 08:48:34.326: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=3 nr=37
*Sep 2 08:48:34.342: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=4
*Sep 2 08:48:39.694: %ISDN-6-DISCONNECT: Interface Serial0/0/1:29 disconnected from 0094777382372 , call lasted 181 seconds
*Sep 2 08:48:39.698: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=4 nr=37
*Sep 2 08:48:39.706: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=5
*Sep 2 08:48:39.730: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=37 nr=5
*Sep 2 08:48:39.730: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=38
*Sep 2 08:48:39.734: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=5 nr=38
*Sep 2 08:48:39.746: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 voice-port 0/1/2
*Sep 2 08:48:49.746: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
*Sep 2 08:48:49.758: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nrsh
*Sep 2 08:48:59.762: ISDN Se0/0/1:15 Q921: User TX -> RRp sapi=0 tei=0 nr=38
*Sep 2 08:48:59.766: ISDN Se0/0/1:15 Q921: User RX <- RRf sapi=0 tei=0 nr
*Sep 2 08:49:01.946: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=38 nr=6
*Sep 2 08:49:01.950: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=39
*Sep 2 08:49:01.950: %ISDN-6-DISCONNECT: Interface Serial0/0/1:27 disconnected from 0503726912 , call lasted 27 seconds
Voice-Gw#
Voice-Gw#
Voice-Gw#
Voice-Gw#
*Sep 2 08:49:01.954: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=6 nr=39
*Sep 2 08:49:01.962: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=7
*Sep 2 08:49:02.034: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=39 nr=7
*Sep 2 08:49:02.034: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=40
controller E1 0/0/1
pri-group timeslots 1-31
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
=======================
Voice-Gw#
*Sep 2 08:55:25.214: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=71 nr=27
*Sep 2 08:55:25.214: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=72
*Sep 2 08:55:25.234: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=27 nr=72
*Sep 2 08:55:25.246: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=28 nr=72
*Sep 2 08:55:25.250: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=28
*Sep 2 08:55:25.258: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=29
*Sep 2 08:55:27.518: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=72 nr=29
*Sep 2 08:55:27.518: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=73
*Sep 2 08:55:27.522: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=29 nr=73
*Sep 2 08:55:27.534: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=30
*Sep 2 08:55:27.546: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=73 nr=30
*Sep 2 08:55:27.546: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=74
*Sep 2 08:55:33.318: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=30 nr=74
*Sep 2 08:55:33.330: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=31
*Sep 2 08:55:33.390: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=74 nr=31
*Sep 2 08:55:33.394: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=75
*Sep 2 08:55:37.190: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=75 nr=31
*Sep 2 08:55:37.194: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=76
*Sep 2 08:55:38.534: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=76 nr=31
*Sep 2 08:55:38.534: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=77
*Sep 2 08:55:38.538: %ISDN-6-CONNECT: Interface Serial0/0/1:27 is now connected to 0504312690 N/A
*Sep 2 08:55:38.538: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=31 nr=77
*Sep 2 08:55:38.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=32
*Sep 2 08:55:42.542: ISDN Se0/0/1:15 Q921: User TX -> INFO sapi=0 tei=0, ns=32 nr=77
*Sep 2 08:55:42.554: ISDN Se0/0/1:15 Q921: User RX <- RR sapi=0 tei=0 nr=33
*Sep 2 08:55:42.606: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=77 nr=33
*Sep 2 08:55:42.606: ISDN Se0/0/1:15 Q921: User TX -> RR sapi=0 tei=0 nr=78
*Sep 2 08:55:46.766: ISDN Se0/0/1:15 Q921: User RX <- INFO sapi=0 tei=0, ns=78 nr=3
% Invalid input detected at '^' marker.
Voice-Gw#sh controllers e1 0/0/1
E1 0/0/1 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20060711, FPGA: 13, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
CRC Threshold is 320. Reported from firmware is 320.
Data in current interval (99 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Voice-Gw#
Voice-Gw(config)#do sh isdn statu
Global ISDN Switchtype = primary-net5
ISDN Serial0/0/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x00000000
Number of L2 Discards = 0, L2 Session ID = 0
ISDN Serial0/0/1:15 interface
dsl 1, interface ISDN Switchtype = primary-net5
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
3 Active Layer 3 Call(s)
CCB:callid=E3C0, sapi=0, ces=0, B-chan=30, calltype=VOICE
CCB:callid=E3C6, sapi=0, ces=0, B-chan=31, calltype=VOICE
CCB:callid=E3CB, sapi=0, ces=0, B-chan=29, calltype=VOICE
Active dsl 1 CCBs = 3
The Free Channel Mask: 0x8FFF7FFF
Number of L2 Discards = 0, L2 Session ID = 2
Total Allocated ISDN CCBs = 3Hi.
Can you please also attach a CUCM trace during a disconnected call?
Thanks
Regards
Carlo -
Users are blocked from filling out online form
I purchased the initial package that allows 500 responses to an online form/month. We've received 5 responses and subsequent applicants have told us they are blocked from completing it.
Hi,
Is there any error message when you access the shared files? Please open the Shared Folders snap-in in mmc, and then find the Open Files in the Shared Folders to check if there is any session opens the shared files.
Shared Folders includes the Open Files that shows the files on the system that are currently open and shows you which users have the files or folders open.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?
You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card -
I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards, I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???
iPhoto 9.6 cannot open iPhoto Libraries on CD/DVD. The iPhoto Library needs to be on a writable storage. Copy the iPhoto library from the disk to a folder in your Pictures folder. And then run the iPhoto Library Upgrader on that copy, see this link: iPhoto '11: About the Library Upgrader
-
My iMessages are coming from my email, how do I get them to come from my phone
My iMessages are coming from my email, how do I get them to come from my phone number again?
This forum is intended for questions about old Apple hardware that precedes the PowerMacs, i.e. hardware from the 1990s and earlier, and doesn't get much traffic. Hence it's not the forum where you'll be most likely to get help with your problem. I've asked the Communities Hosts to move your post to the iPhone forum. You'll be more likely to get assistance there. Regards.
-
Help me! After updating my iphone 3g is no longer able to call!!
Outgoing calls can be made but the recipient does not feel anything. I own a phone that is useless!First try Resetting it: Hold down the home and sleep button, ignore the red OFF slider, wait for the Apple logo then let go.
If that does not work, Restore your iPhone in iTunes from your backup.
If that still does not fix it, Restore your iPhone and a new phone (not from backup) and see how it works. If it is doing fine you have a app you are using that is probably causing your problem. Load them one and a time until the problems recur and you will have found the one that is a problem. -
Hi,
We have an Exchange server 2007 and an Edge server 2007 is configured in the perimeter network. Most of our clients use Public email domains such as Yahoo and Gmail. Last few weeks it has been a major issue for us that most of the emails from Yahoo/Gmail
get blocked by our Edge server calming the sender IP address is in Block Lists.
As a solution I've added yahoo.com/gmail.com/aol.com/hotmail.com to "BypassedSenderDomains" hoping if emails receive from one of these domains it will bypass the connection filtering. But still some of our customers complain that their emails are
still not passing to us and blocked by our edge server. They have provided me the error message they receive.
Our clients get following error message
edgexch gave this error: Recipient not authorized, your IP has been found on a block list
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction
may be preventing delivery.
550 5.7.1 Recipient not authorized, your IP has been found on a block list
When I check the Agent logs in Edge server I found specific email had been blocked. Please check one of the log entry.
Timestamp : 1/30/2014 1:45:15 PM
SessionId : 08D0E865200E7CBF
IPAddress : 98.139.213.140
MessageId :
P1FromAddress : Sender Email Address (@yahoo.com)
P2FromAddresses : {}
Recipients : {Recipient Email address}
Agent : Connection Filtering Agent
Event : OnRcptCommand
Action : RejectCommand
SmtpResponse : 550 5.7.1 Recipient not authorized, your IP has been found on a block list
Reason : BlockListProvider
ReasonData : bl.spamcop.net
This troubles me because I've added Yahoo.com to "BypassedSenderDomains" on 1/28/2014 and this email was blocked on 1/30/2014. I've checked whole Agent logs from 28th to-date and found most of the messages from white-listed domains bypassed
the content filtering but some were still getting blocked. Most of the messages from white-listed domains were blocked from "bl.spamcop.net " IP block list provider.
As a solution for the current situation I've disabled "bl.spamcop.net" from the "IP block List Providers". But the issue is, why the mails are getting blocked even the domains were white-listed. I though after white-listing emails domains,
messages will bypass the content filters if the email generates from one of the white-listed email domain.
I've also added the "Content Filter Config" for your reference.
[PS] C:\Windows\system32>Get-ContentFilterConfig
Name
: ContentFilterConfig
RejectionResponse
: Message rejected as spam by Content Filtering.
OutlookEmailPostmarkValidationEnabled
: True
BypassedRecipients
QuarantineMailbox
: [email protected]
SCLRejectThreshold
: 7
SCLRejectEnabled
: False
SCLDeleteThreshold
: 9
SCLDeleteEnabled
: False
SCLQuarantineThreshold
: 5
SCLQuarantineEnabled
: True
BypassedSenders
BypassedSenderDomains
: {yahoo.com, gmail.com, hotmail.com, aol.com}
Enabled
: True
ExternalMailEnabled
: True
InternalMailEnabled
: False
AdminDisplayName
ExchangeVersion
: 0.1 (8.0.535.0)
DistinguishedName
: CN=ContentFilterConfig,CN=Message Hygiene,CN=Transport Settings,CN=First Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,CN={4546F49-6BC5-4F7A-848F-03E4652528A6}
Identity
: ContentFilterConfig
Guid
: c501959c-b062-4f59-8f0c-404c53f54a34
ObjectCategory
: CN=ms-Exch-Message-Hygiene-Content-Filter-Config,CN=Schema,CN=Configuration,CN={4546F4196BC5-4F7A-848F-03E4652528A6}
ObjectClass
: {top, msExchAgent, msExchMessageHygieneContentFilterConfig}
WhenChanged
: 1/28/2014 8:48:49 PM
WhenCreated
: 1/8/2012 8:42:18 PM
OriginatingServer
: localhost
IsValid
: True
It would be great if someone could help me to resolve this issue because this is a major problem since we lost mails from our valuable customers.
Thanks in advance.
TharakaHere is a similar issue someone with Exchange 2010 -
http://social.technet.microsoft.com/Forums/exchange/en-US/36aec4f6-6d73-4d71-ab64-e7f3d817b39b/exchange-2010-still-blocks-mail-from-domain-on-dnsbl-even-though-its-on-bypassedsenderdomain?forum=exchange2010. So in essence, use the exceptions tab for
the IP Block List Providers. See if that will work as a solution for you.
JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution. -
Content blocked by AdBlock! How to unblock it?
I try to reach a webpage and got this message
Content blocked by AdBlock!
Part of the content of the advertisement is being blocked by a browser extension.
I didn't even install any Ad blocker. How can this happen? And how to unblock content?You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Calling anonymous block from Unix
I have a very simple block of code I'm calling from a wrapping ksh script, it works well but I'm having a hard time getting output from PL/SQL back to my ksh script.
Output from $OUT1 is none
Please advise.
Script:
#!/bin/ksh
# Set environment
. ~/.profile
export ORACLE_SID=vastrp
sqlplus -s / as sysdba>$OUT1<<!
set serveroutput on size 1000000
DECLARE
scn_num number;
BEGIN
select max(next_change#)-1 into scn_num from v$archived_log where next_time > trunc(sysdate) and next_time < trunc(sysdate) + 5/1440;
dbms_output.put_line('SCN:' || to_char(scn_num));
dbms_output.put_line('Print NOW');
END;
exit;
echo $OUT1
exit
----------------------------------------------------------Here is an example.
1 i=`sqlplus -s xopmaster/xopmaster<< eof
2 set serverout on;
3 set feedback off;
4 set heading off;
5 exec dbms_output.put_line('Hello world');
6
7 exit;
8 eof`
9 echo $i
"test.sh" 9 lines, 155 characters
hdev1:/apps/home/> ./test.sh
Hello world -
Users are blocked from opening files
I am running an intranet server with WIndows server 2008 on it.
2 days ago the power went down and when the ups ran out of power so did the server. Some of my coleagues restarted the server since it was blocked and since it blocks almost at 2 hours. Users can browse folders from the shared files, but when they try opening
the files (mostly excel files) they get stuck.
Did anyone else have this problem? I need to know how to fix it.Hi,
Is there any error message when you access the shared files? Please open the Shared Folders snap-in in mmc, and then find the Open Files in the Shared Folders to check if there is any session opens the shared files.
Shared Folders includes the Open Files that shows the files on the system that are currently open and shows you which users have the files or folders open.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I have Iphone 4s, after updating it to ios7 i am facing problem, whenever i switch off and restart the mobile i am unable to call anybody. Than i have to dial *#31# to make calls. I thought it was IOS defect but after updating to ios8.0.1 even i am facing same problem.
Is there any Permanant solution to it.
Regards,
RiteshYour issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution. -
Stratus incoming calls are blocked by Windows Firewall
Hello.
i have created a samll AIR application that can recive stratus incoming calls. the applications works fine however on windows 7 the firewall blocks all incoming calls (and the applications simply does not recive them with no spceial indication from windows on the block). when i add my application to the allowed progrmas in the firewall settings everthing works fine. the problom is that i want that many users will install my application.
how can i add the application to the allowed firewall programs (on windows 7) automatically during the applications instaltion (i created the instaltion using the "Export Relese Build" in the Flash builder).
Thanks in advance.Hi,
This issue is more related with Visual C#, you could post in that forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Karen Hu
TechNet Community Support
Maybe you are looking for
-
How do I create ringtones in iTunes on Macbook Pro?
I used to create my ringtones on my old laptop which was a windows, and I tried doing it on my macbook, but they don't go as ringtones.. Is there a different way to do so on mbp than windows? I don't wanna have to keep getting out the old windows to
-
What is a PDF Portfolio? | Learn Acrobat X | Adobe TV
This video explains how to create a PDF Portfolio in Acrobat X Pro. http://adobe.ly/yLb9tW
-
Every time when I connect my iphone to my pc, Itunes stops working
When Itunes is activated on my pc, en then I connect my iphone tot de pc. First itues start syncup, then my computer give's an error, en itunes stops working. I already tried deïnstalling, en reïnstalling. But nothing works. Itunes alone works perfec
-
I'm looking at purchase a ipad2 3G/wifi and I was wondering can I transfer DVDs (from a TV series for instance) from my Macbook pro. If so what is the best software. I already have Popcorn and Titanium toast. Thanks
-
Foreach table in each database?
Hi, (SQL 2008R2 - enterprise) Looking for a way of calculating table cardinality for all databases in an instance. Is there a way of adapting this code to run against all databases? DECLARE @TableRowCounts TABLE ([TableName] VARCHAR(128), [RowCount