My package is running endlessly

Dear All,
  My package which I was running for quite long time for inputting data is running long time today, normally it'll take 2 minutes.
Shall I abort it? Please advice..
Thanks & Regards,
Saravana Prabhu

Hi,
If you suspect there's something wrong you obviously need to take some action.
However, before that you may want to check whether the calculation is actually misbehaving or is it just a question of a glitch in the UI. You can find the package log file on the server in the %APP%\Datamanager\Tempfiles\ folder and see if it says finished. You can also monitor the file while the package is running to see if it grows, indicating that the system is still working.
If you see from the log that the calculation has been finished the obviously it's only the UI and you can clean up the log, otherwise you may want to investigate further.
Hope this helps,
Madis

Similar Messages

  • SSIS Lookup Task is running endlessly.

    Hello,
    I have a Problem. At our SSIS package we have a lookup task running on full cache mode and finds no matches. It runs endlessly and doesn't fail, allthough it's configured at this case.
    SQL Server (SSMS/SSIS/SSAS) is running on a virtual machine with windows server 2012 and SQL Server 2012 built 11.0.5058. 
    Does anybody has/had a similar problem and solved it?
    Thanks,
    Thomas 

    Hi Thomas,
    Based on my research, the issue can be caused by the memory is low or a deadlock occurs when several long-running transactions execute concurrently in the same database.
    As to the memory issue, please refer to Arthur and Supriya’s suggestions. As to the deadlock issue, we can go to SSMS and check in Activity Monitor to see if you have locked resources during the load. To minimize deadlocks, we can set the full cache look
    up transform to use Sorting within the TSQL statement to make sure the concurrent transactions access objects in the same order. Or set READ_COMMITTED_SNAPSHOT database option ON to enable read-committed transactions to use row versioning.
    The following similar threads are for your references:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/250b398b-1af6-49be-a78d-f58cb41bae08/lookup-transform-w-custom-query-hangs-and-does-not-complete-ssis-2k8?forum=sqlintegrationservices
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3d1c112d-6e10-4716-8607-cd0a5d6a8c87/ssis-2012-lookup-transformation-takes-too-long-or-hung
    Minimizing Deadlocks
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

    I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

    update manually:
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2014 updates:  win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

  • Known issue: Speech APIs fail when an x86 package is run on an x64 desktop (Windows 10 Insider Preview SDK and tools, April 2015 release)

    When building an app for the x86 platform, speech APIs fail when the x86 package is run on the desktop of an x64 system. You may see an error with the message "mod not found".

    Use the Visual Studio Configuration Manager to retarget the app to x64 when running on an x64 system.

  • )How can we schedule the info package daily run at 6 AM, with out useing in

    Hi
       Can any one explain 1) what is information broadcasting &how can we use this.
    2)What are the settings we have to do when we use the charts in WAD's
    3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
    Thanks
    Bharath

    Hi,
      Information broadcaster :
          you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
    have a look at the below link.
         http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
    Infopackage scheduling:
         you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
    Regards,
    Siva.

  • Before Report Trigger Running Endlessly

    Hi all,
    I got the following query in my before report trigger. But the system is running endlessly without stop. Any advise is appreciated.
    function AfterReport return boolean is
    begin
    delete chart_temp;
    COMMIT;
    IF :P_1 IS NOT NULL THEN
         INSERT INTO CHART_TEMP VALUES ( :PERIOD1, :M1 );
    ELSE
    IF :P_2 IS NOT NULL THEN
    INSERT INTO CHART_TEMP VALUES ( :PERIOD2, :M2 );
    END IF;
    END IF;
    COMMIT;
    return (TRUE);
    end;
    rgds
    Lim

    Rules-wise, you have the beforeReport trigger before the dataStructure, and that is correct. Syntax, the parameter is going in okay. Question is then the logic or data. Does the function work outside of this? That is, if you were to exec the function in an anonymous block of PL/SQL, do you get the desired output (i.e., test for boolean value returned)?

  • DTP runs endless and fails

    Hiii ,
    When I execute the DTP which loads data to ODS ,It runs endless and fails .
    I reactivated the ODS ,Retransported Still issue persists.
    Also i tried creating new DTP it also goes into endless and status remains Yellow and turns red after some time.
    Kindly help
    Regards.
    Akshay

    Hi Akshay,
    Please check in ST22 or SM21 for any errors raised by DTP failure. It might happen that it is due to partition max level reached.
    Please check free background processes in SM50 and data volume in DTP request. If possible change the DSO settings as Kodanda has suggested.
    Thanks
    Amit

  • Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
    Just in case, let's try the fixit from the following document:
    Fix problems with programs that can't be installed or uninstalled

  • How do I stop packages from running?

    I scheduled the intercompany packages to run every 10 mins for the last 2 months and have put in an End date each time.  For some reason they are not ending.  I have tried to abort them by right clicking on the package but either abort is not an option or nothing happens.  I am on BPC v 7.5.
    Thanks

    Hi Amanda,
    try from more->package schedule status. If not possible bpc side, delete it from windows scheduler task.
    Regards
         Roberto

  • Does "Run another program first" affect if the real package will run?

    In order to sequence some things, in my package I want to do a "run another program first" before what I'm really trying to do runs. 
    My problem is that the thing I want to put in RAPF sometimes fails or times out due to some issues with our machines, but I want the "real" package to run regardless of the results of the RAPF package. 
    My question is, if the thing in RAPF fails or times out, will the original package still run after the failure/timeout?

    Doesn't look like I'm able to make a new TS, might be a permissions thing I'll check on.
    Also, just to give more details, what I'm trying to do is run two command lines, one an msiexec command with switches and then after that runs, then a setup.exe command with switches, then when those finish a vbs which I know finishes.  I
    think it's either the msiexec or setup.exe one that hangs (possibly asking for a reboot or something that it doesn't really need).

  • Tool or Package to run fuctionality of CRM in SAP ECC 6.0

    Hi All
    My requirement is to run multiple product schemes for free goods. We have not implemented CRM in our company. I know standard SAP support 1:1 free goods functionality,but am looking for tool or package which will help me to run the process like CRM. We have implemented Multi-product free goods process( eg:- 5+1 bye any 5 material out which one material is free.) Now the business require same product with bundle schemes and one to one free goods schemes.
    To achieve this process am looking for tool or package which will provide me functionality like  CRM
    Regards
    Avinash

    Hi
    If I understood you correctly, you are looking for many to one and one to many relation in free goods. Right?
    As you already know in standard SAP there is 1:1 ratio allowed. There is no standard functionality which can support many to many or many to one or one to many free goods in SAP ECC. This has always been done through ABAP or by using BOM functionality.
    Thank$

  • How data flow when SSIS packages are run on a different server than the DB server

    The scenario is that i have a dedicated SQL SErver 2014 SSIS machine that executes the packages.
    The database server is a separate machine with SQL Server 2008R2.
    1) Running SSIS packages that transfer data within SQL Server 2008R2 (same machine)
    2) Running SSIS packages that transfer data between 2 separate SQL Server servers.
    How the data flow in these two cases and what resource is being used where? (cpu,disk,ram,network)
    Elias

    When you have a dedicated SSIS server, all data read flows to that server, is processed using the resources of that ETL server and then sent back over the network to the destination server.
    It doesn't matter if source and destination are the same server. If you use a data flow, all data flows over the network twice.
    The only exception is when you don't use a data flow, but only SQL statements. In that case, data flows only between source and destination.
    MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

  • Process Orchestration - Configuration Wizard "Process Integration and Orchestration Package" shows running

    Hi SAP Gurus,
    I have installed an SAP PO system and am running the Config Wizard from NWA. The functional unit I have selected from NWA is - "Process Integration and Orchestration Package". This functional unit has in turn selected few more functional units like AEX, SLD. The issue that I am facing is that the wizard does not appear for my inputs and it shows that the selected wizards are running. Please see attachment "config_wizard_running.jpeg"
    I read some forums and found a thread where in it was mentioned how to stop the config wizard and restart it. http://scn.sap.com/thread/1422958
    Even after restarting my server, the functional units are still showing as running in NWA --> Configuration --> Scenarios --> Configuration Wizard --> Functional Unit Configuration UI. Please see attachment "Config_wizard_stuck.jpeg"
    I restarted the application as suggested in the post so that I could run Config Wizard again. But its now allowing me to start it as the status is Running.
    Please suggest.
    Regards,
    Amit

    Hi Dimitri,
    Thanks a lot. I have resetted the functional units. This time the wizard comes up ok.
    Regards,
    Amit

  • Support Package uprade in endless loop

    Hello experts,
    we have a SP upgrade (from ECC level 10 to SP-level 16) running in a queue that is getting imported via SPAM (version 36). The import has been running for more than 24 hours, is this normal or did I hit an endless loop?
    I noticed it has been running (and still is) in one phase only
    for ages:
    "INFORM SAP-SYSTEM OF TP TERMINATION"
    In the log files I can see this warning:
    Background job RDDIMPDP could not be started or terminated abnormally
    Looking around in this forum I think I've found the solution, I have to reschedule the background job RDDIMPDP.
    But my problem is that am running in downtime-minimized mode in SPAM and I cannot logon to sap system anymore, it gives me a syntax error if I try to. How can I cancel this SPAM import, can I somewhere kill processes, or should I just restart the SAP application server??
    Can you please, please advise? Your help is really appreciated!
    Manfred

    Hi,
    If you are getting Syntax error for every Txn. then u can't do anything expect Restore.
    I faced same problem some days before & resolved by restoring the backup.
    Also in my case  the exact problem is the wrong value of parameter rdisp/msvsrv_internal & I reset it to default value 0 & next time my patch is upgrade successfully.
    BR,
    Darshan

  • Support Package still running in Import_proper phase ( KB70017)

    Dear all,
    When i appling  Basis Support Package ( KB70017) , still its running the import_proper phase and its running around 12 hours .
    kindly suggest me to resolve the issue
    Regards

    Dear all ,
    i applied Basis Patch it took long time and still its not complete so i restart the server .
    now i cant able to login SAP its giving Syntax error kindly advise me
    i found these are the logs in this directory usr\sap\trans\tmp logs
    1 , UMODPROT.SID log
    ETN080X*************************************************************************
    1 E0U531 "Report RSUMODSP (modified objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:40:03"
    1 ETN080 *************************************************************************
    3 E0U531 "Analysis for OCS Package Queue:"
    3 E0U531 "SAPKB70017"
    3 E0U531X"Special handling of SORTTABS tables..."
    3 E0U532X"Check objects of request" "SAPKB70017"
    3 E0U531X"Update modification information..."
    3 E0U531X"Summary:"
    3 E0U531 "No modified SAP objects found"
    1 ETN080X*************************************************************************
    1 E0U531 "Report RSUMODSP (modified objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:53:07"
    1 ETN080 *************************************************************************
    3 E0U531 "Analysis for OCS Package Queue:"
    3 E0U531 "SAPKB70017"
    3 E0U531X"Special handling of SORTTABS tables..."
    3 E0U532X"Check objects of request" "SAPKB70017"
    3 E0U531X"Update modification information..."
    3 E0U531X"Summary:"
    3 E0U531 "No modified SAP objects found"
    AMODPROT.SID log
    1 E0U532 "Report RSUMOD10_SP" "(Classification of Modified Objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:54:57"
    1 ETN080 *************************************************************************
    3 E0U533X"Fetch objects to be adjusted" "(SPDD)" "from UMODOBJ..."
    4 E0U533 "Fetch objects from request" "SAPKB70017" "..."
    3 E0U532 "0" "objects to be adjusted were fetched"
    CMODACT.SID log
    ETN085X"OCS Package Queue Import:" "15.01.2010" "10:23:11" " "
    1 ETN085 "(De)activate customer exits:" " " " " " "
    1 ETN085X"OCS Package Queue Import:" "15.01.2010" "11:23:22" " "
    1 ETN085 "(De)activate customer exits:" " " " " " "
    IMODPROT.SID log
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "09:45:14"
    1 ETN080 *************************************************************************
    Regards
    1 ETN080X*************************************************************************
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:08:39"
    1 ETN080 *************************************************************************
    1 ETN080X*************************************************************************
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:54:58"
    1 ETN080 *************************************************************************

Maybe you are looking for