My pad does not have any sounds at all

Please . My ipad does not have any sounds at all .. I dont know what to do
I shut it off while there was music playing and when i turned it back on , there was no more sounds completely

There's a little button by the volume rocker switch that's a dual purpose button. It's an all mute or a rotation lock. Could you have flipped that button by mistake?

Similar Messages

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

I do not have any sounds at all.

I do not have any sounds at all. All volumes are turned up. No rings, no vibrations and card games have no sound.

Make sure the side switch (above volume buttons) is not set to mute.
Make sure Do Not Disturb is off (Swipe up from the bottom of the screen to access Control Center and make sure the moon icon is not lit)
Try a Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

Missing sound. my Mac Pro does not have any sound

My computer does not produce any sound when playing back any media files

Good Morning gmcres,
If you are not hearing sound from your computer, take a look at the troubleshooting steps below. Is this only happening in iTunes? Are you able to hear system sounds (alerts, etc.)?
OS X Yosemite: If you can’t hear sound from your speakers
https://support.apple.com/kb/PH18958?locale=en_US&viewlocale=en_US
Have a great weekend!
- Judy

My you tube does not have any sound, i used to have it before, did i accidentally turn the sound somehow?

i used to be able to listen to youtube on my laptop, but now i can only see the images, no sound.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

My new iphone 4 does not have any sound when recording a video with the camera app. Does anyone know how to fix this?

I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!

There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.

My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??

Check the Mute switch, which is on the left side of the phone above the volume buttons.

Resizing a TIFF File: Overwriting TIFFFields does not have any effect

Hi,
I have some TIFF files that I am receiving through a FAX server. Some of the TIFF files have an image length of *1077 pixels and a DPI of 200x98*. These images open fine in generic viewers like Microsoft Image Viewer and IrfanView and the image size in the information dialog shows up fine (1752x2158). But when I open the images in a LeadTools viewer (that works off TIFF Header tags), the image appears stretched out.
I am trying to re-sample the image to make it a true Letter size image (1700x2200) with resolution of 200x200. I have been able to set the TAG_X_RESOLUTION and TAG_Y_RESOLUTION which I can see changed in the Tag Viewer. But changing the following tags does not have any effect on the resulting image:
TAG_IMAGE_WIDTH
TAG_IMAGE_LENGTH
TAG_ROWS_PER_STRIP
the following is the code I am using, I have tried all possible ways (removing TIFFFeilds and then adding them), but it has no effect. The last options is to use a Print Driver from within Java and Print the image (that re-samples it into a 8.5x11 inch image with 200 DPI). At this point, I am just curious about writing TIFFFields with images. Any ideas are appreciated:
Thanks,
Manuj
+
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.util.Iterator;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.ImageWriter;
import javax.imageio.metadata.IIOMetadata;
import javax.imageio.stream.ImageInputStream;
import javax.imageio.stream.ImageOutputStream;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import com.sun.media.imageio.plugins.tiff.BaselineTIFFTagSet;
import com.sun.media.imageio.plugins.tiff.TIFFDirectory;
import com.sun.media.imageio.plugins.tiff.TIFFField;
import com.sun.media.imageio.plugins.tiff.TIFFImageWriteParam;
import com.sun.media.imageio.plugins.tiff.TIFFTag;
import com.sun.media.imageioimpl.plugins.tiff.TIFFT6Compressor;
               //set the input stream for to the reader
               tiffFileReader.setInput(tiffFileInputStream);
               //define the writer
               ImageWriter tiffWriter = (ImageWriter) ImageIO.getImageWritersByMIMEType("image/tiff").next();
               //define the writer param with compression;
               TIFFImageWriteParam writeParam = (TIFFImageWriteParam)tiffWriter.getDefaultWriteParam();
               TIFFT6Compressor compressor = new TIFFT6Compressor();
               writeParam.setCompressionMode(TIFFImageWriteParam.MODE_EXPLICIT);
               writeParam.setCompressionType(compressor.getCompressionType());
               writeParam.setTIFFCompressor(compressor);
               writeParam.setCompressionQuality(Float.parseFloat("1"));
// get the metaData
               IIOMetadata imageMetadata = null;
               IIOImage testImage = null;
               for(int i=0;i<filePageCount;i++)
                    imageMetadata = tiffFileReader.getImageMetadata(i);
                    TIFFDirectory dir = TIFFDirectory.createFromMetadata(imageMetadata);
          // Get {X,Y}Resolution tags.
          BaselineTIFFTagSet base = BaselineTIFFTagSet.getInstance();
          TIFFTag tagXRes = base.getTag(BaselineTIFFTagSet.TAG_X_RESOLUTION);
          TIFFTag tagYRes = base.getTag(BaselineTIFFTagSet.TAG_Y_RESOLUTION);
          TIFFTag tagImageWidth = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_WIDTH);
TIFFTag tagImageLength = base.getTag(BaselineTIFFTagSet.TAG_IMAGE_LENGTH);
          TIFFTag tagRowsPerStrip = base.getTag(BaselineTIFFTagSet.TAG_ROWS_PER_STRIP);
          TIFFField fieldRowsPerStrip = new TIFFField(tagRowsPerStrip, TIFFTag.TIFF_SHORT, 1, (Object)new char[]{2200});
          // Create {X,Y}Resolution fields.
          TIFFField fieldXRes = new TIFFField(tagXRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          TIFFField fieldYRes = new TIFFField(tagYRes, TIFFTag.TIFF_RATIONAL,1, new long[][] {{200, 1}});
          // Create Width/Height fields.
          TIFFField fieldImageWidth = new TIFFField(tagImageWidth,TIFFTag.TIFF_SHORT,1, (Object)new char[]{1728});
          TIFFField fieldImageLength = new TIFFField(tagImageLength, TIFFTag.TIFF_SHORT,1, (Object)new char[]{2200});
          //TIFFTag imageLengthTag = fieldImageLength.getTag();
          // Append {X,Y}Resolution fields to directory.
          dir.addTIFFField(fieldXRes);
          dir.addTIFFField(fieldYRes);
          //add Image Length and height parameters
          dir.addTIFFField(fieldImageWidth);
          dir.addTIFFField(fieldImageLength);
          // dir.removeTIFFField(278);
          dir.addTIFFField(fieldRowsPerStrip);
testImage = new IIOImage(tiffFileReader.read(i), null, dir.getAsMetadata());
+
The resulting image with this carries the updated DPI values (200x200) but still carries the old values of 1752x1077, the length being exactly half of what Irfan view is showing.
Edited by: Manuj on Nov 2, 2010 10:48 AM

Your problem for some reason sounds familiar.
EDIT
Ok, now I remember. Your post is like this one in the old forums,
http://forums.sun.com/thread.jspa?forumID=540&threadID=5425983
Basically, for viewing purposes Irfanview scales the image's height by 2 and changes the dpi to *200x196*. It does this to achieve a 'square' pixel. The image that appears on screen now looks roughly how a printer would print it. However, the image data is still the same squished 1752x1077 image.

TS4147 I have followed the instructions in this article several times and am still unable to delete the duplicates from my i-phone. The i-cloud does not have any duplicates. Anyone know a fix?

Been into iCloud and checked my Address Book which does not have any duplicates. However, try as I may I cannot delete the duplicates on either my iPhone nor my Mac. I've tried the 'delete duplicates' instructions many times to no avail. Anyone any suggestions?
Thanks.

Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.

Safari 8.0.2 does not play any sound (but sound works in other apps).

Safari 8.0.2 does not play any sound (but sound works in other apps).

Hi Michaelgst,
Welcome to the Apple Support Communities!
I understand that you do not hear sound from Safari on your computer but you do hear sound in other applications. There may be several troubleshooting steps I would suggest to troubleshoot this situation.
The first troubleshooting steps I would recommend would be removing any unsupported third-party add-ons. Please use the information and instructions located in the attached article to complete this process.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

Why do i not have any sound on my iphone?

why do I not have any sound on my iphone? It wont play music, video, or even the text sounds. it does play a ringtone when someone calls though

I figured it out lol. the "headphones" was the giveaway. the headphones plug was full of lint. so I cleaned it up and it seems to be working fine. Thanks for the replys!

How to find a customer who does not have any activity in the last 5 years

HI all,
How to find a customer who does not have any activity in the last 5 years.
Thanks & Regards,
Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

Post Author: tzinser
CA Forum: Formula
Okay, I left off a lot of important information...
I'm using two tables
TWDATA
EVENT
From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
The two tables are linked by OrderNumber.

I cannot run iPhoto after update to Yosemite. I cannot update iPhoto because the application store does not have any iPhoto update available. Anyone can advice how to overcome this hassle?

After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?

mende1 wrote:
Unfortunately, Apple has removed both iPhoto and Aperture from the Mac App Store so they cannot be downloaded anymore. This means you are forced to migrate to Photos (included in OS X 10.10.3) or, if this app does not include features you need, look for a different app.
Not true. Apple has removed both Apps from App Store so you cannot buy them anymore. But if you have any of these Apps already purchased in the past, then you can still download them on your Mac.
Aristotle247 wrote:
After update to Yosemite 10.10.3 the iPhoto program icon is banned and there is an error message that an update is required to run iPhoto, but the application store shows a message that iPhoto does not have any update available at this time. There is not even any iPhoto program available on the application store. Any suggestion on how to solve this annoyance?
Open App Store, sign in with your Apple ID and go to Purchases tab. If you see iPhoto app listed there close down the App Store and do this steps as this is what worked for me:
Open Finder and go to Applications folder.
Locate iPhoto app
Drag iPhoto app from your Applications folder to Trash (NOTE: Do not emptied Trash yet)
Open App Store app and navigate to Purchases tab.
Click on Install button which is next to the iPhoto app (on the right hand side).
Once iPhoto is downloaded again, test it if its working for you. If all is ok, you can remove your Trash.

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

Terminal server does not have any installed licenses

Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
“The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
Product version: Windows Server 2008 or Windows Server 2008 R2
Licensing mode: Per User
License type: RDS CALs”
So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

Hi,
Thank you for posting in Windows Server Forum.
From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server. If the license server has installed licenses of the other mode, changing the licensing mode
for the terminal server may also resolve the issue.
To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command.
To change the licensing mode on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
Please refer below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
Please check computability matrix.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

My pad does not have any sounds at all

Similar Messages

Maybe you are looking for