MY PAGE IS ALL RED , flash not working w/ chrome

when i go on a page it shows all red, no pictures work, but when i go to the adobe site it says i have the latest version installed... please help m! thanks

This forum software is very tricky; updates to forum posts sometimes need to be done three or four times until it "takes".  I have been able to update your original post.
Now that it is actually readable, I will go and have a look at it.

Similar Messages

  • Hp 6500 wireless. all buttons flashing not working

    i have a hp 6500 wireless, and it is not working .
    all buttons are flashing and the screen reads, "to avoid damage turn off and then turn back on"
    i tried that but idid not work

    Turn the printer off.  Hold # and 6 keys on the printer while and for a few seconds after turning it back on.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Flash not working correctly; Chrome & Firefox

    I use to use Firefox exclusively and had Flash installed as a plugin and it worked fine. I accidentally un-installed it and then reinstalled it. Since then it will not load pages completely; only partially. I then got Chrome and it does the same thing. I am trying to use Flash to view job postings on the Accountemps & Robert Half websites. Any suggestions? This is quite frustrating

    I had the same problem, so what I did was I went to chrome://plugins/ and hit the details for flash, and there were 3 versions of it under details, I just uneabled 2 and ran one until it worked. Shockwave Flash 11.3 r300 this one was causing the issue ,   This one worked Shockwave Flash 11.3 r300 , this one also caused the issue  Shockwave Flash 11.4 r402.

  • Flash not working in chrome

    I have a mac and use google chrome. Flash player stopped working one day because it said it was out of date. So I installed the updates but it keeps saying it's out of date. I've installed the latest version with automatic updates and manually several times now, but it keeps saying "flash player is blocked because it is out of date"
    Is this a google chrome problem?
    chrome:flash:
    About Flash
    Google Chrome
    21.0.1180.90 ()
    OS
    Mac OS X
    Flash plugin
    10.3.183.7 /Library/Internet Plug-Ins/_Flash Player.plugin
    Flash plugin
    10.3.183.43 /Library/Internet Plug-Ins/Flash Player.plugin (not used)
    --- Crash data ---
    Crash Reporting
    Enable crash reporting to see crash IDs
    For more details
    https://support.google.com/chrome/?p=ui_usagestat
    --- GPU information ---
    --- GPU driver, more information ---
    Vendor Id
    0x10de
    Device Id
    0x0866
    Driver vendor
    Driver version
    1.5.48
    Driver date
    Pixel shader version
    1.20
    Vertex shader version
    1.20
    GL version
    2.0
    GL_VENDOR
    NVIDIA Corporation
    GL_RENDERER
    NVIDIA GeForce 9400M OpenGL Engine
    GL_VERSION
    2.0 NVIDIA-1.5.48
    GL_EXTENSIONS
    GL_ARB_transpose_matrix GL_ARB_vertex_program GL_ARB_vertex_blend GL_ARB_window_pos GL_ARB_shader_objects GL_ARB_vertex_shader GL_ARB_shading_language_100 GL_EXT_multi_draw_arrays GL_EXT_clip_volume_hint GL_EXT_rescale_normal GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_gpu_program_parameters GL_EXT_geometry_shader4 GL_EXT_transform_feedback GL_APPLE_client_storage GL_APPLE_specular_vector GL_APPLE_transform_hint GL_APPLE_packed_pixels GL_APPLE_fence GL_APPLE_vertex_array_object GL_APPLE_vertex_program_evaluators GL_APPLE_element_array GL_APPLE_flush_render GL_APPLE_aux_depth_stencil GL_NV_texgen_reflection GL_NV_light_max_exponent GL_IBM_rasterpos_clip GL_SGIS_generate_mipmap GL_ARB_imaging GL_ARB_point_parameters GL_ARB_texture_env_crossbar GL_ARB_texture_border_clamp GL_ARB_multitexture GL_ARB_texture_env_add GL_ARB_texture_cube_map GL_ARB_texture_env_dot3 GL_ARB_multisample GL_ARB_texture_env_combine GL_ARB_texture_compression GL_ARB_texture_mirrored_repeat GL_ARB_shadow GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_occlusion_query GL_ARB_point_sprite GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ARB_pixel_buffer_object GL_ARB_draw_buffers GL_ARB_shader_texture_lod GL_EXT_compiled_vertex_array GL_EXT_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_texture_rectangle GL_ARB_texture_rectangle GL_EXT_texture_env_add GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_texture_lod_bias GL_EXT_abgr GL_EXT_bgra GL_EXT_stencil_wrap GL_EXT_texture_filter_anisotropic GL_EXT_secondary_color GL_EXT_blend_func_separate GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_depth_bounds_test GL_EXT_texture_compression_s3tc GL_EXT_texture_compression_dxt1 GL_EXT_texture_sRGB GL_EXT_blend_equation_separate GL_EXT_texture_mirror_clamp GL_EXT_packed_depth_stencil GL_EXT_bindable_uniform GL_EXT_texture_integer GL_EXT_gpu_shader4 GL_EXT_draw_buffers2 GL_APPLE_flush_buffer_range GL_APPLE_ycbcr_422 GL_APPLE_vertex_array_range GL_APPLE_texture_range GL_APPLE_float_pixels GL_ATI_texture_float GL_ARB_texture_float GL_ARB_half_float_pixel GL_APPLE_pixel_buffer GL_APPLE_object_purgeable GL_NV_point_sprite GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_blend_square GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_fog_distance GL_NV_depth_clamp GL_NV_multisample_filter_hint GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_ATI_texture_mirror_once GL_ATI_texture_env_combine3 GL_ATI_separate_stencil GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod

    Is this still a problem?

  • Flash not working in Safari 5

    Flash has been buggy for me in Safari 5, ever since I updated the Flash player last week to "10.1 r53". Either Flash files don't play at all, or just the audio plays without video.
    Per the instructions on these boards, I have:
    1. reset Safari
    2. uninstalled flash player
    3. installed the flash player
    4. repaired permissions
    5. restarted
    The issue is still there. Firefox plays Flash files, YouTube, etc. just fine. Safari does not.
    I'm running SL 10.6.4, latest Software Updates.
    Any suggestions?
    Thanks!

    I created a new account. Flash works in the new account. That's cool, but I really don't want to re-locate all my prefs, etc., just for a buggy plugin.
    So, I next...
    1. grabbed the Safari plist from the new account
    2. logged out of the new account
    3. logged into the old account (where Flash does not work)
    4. moved the old account's com.apple.safari plist file out of the Preferences folder
    5. moved the clean Safari plist file (from the new account) into the Preferences folder
    6. reset and restarted Safari
    7. Flash worked...for about two minutes. I tested on YouTube, Vimeo and Google Analytics. Back to Flash not working in Safari.
    I then tried repeating the earlier steps.
    1. reset Safari
    2. uninstall flash player
    3. install flash player
    4. repaired permissions
    5. restarted
    Still doesn't work.
    Just one other thing to note: whenever I pull up a web page with Flash, I get a "file not found" error in Safari's activity monitor (link is below)...could this be an error with Adobe's website rather than a Safari-permission thing?
    http://fpdownload2.macromedia.com/get/flashplayer/update/current/install/version .xml10.1.53.64~os=Mac&osVer=10.6.4&playerType=pl&cpuWordLength=32&cpuArchitectur e=i386&lang=en

  • NOKIA 202 RED BUTTON NOT WORKING

    I JUST TURNED OFF MY PHONE 202 AND  after some time i try to switch on that phone but red button not worked  and other keybuttons works good and i try flash the phone but it says remove cable and batery and put cable and put batery and power on but funny thing is my red button not worked and i just got dull finally i am asking you guys is there any solution to power on i try almost all key board tricks i.e * 3 gren red etc  or a software to power on.MY NOKIA 202 RED BUTTON NOT WORKING 

    Hi, DEVRAMP. How did you flash your phone? Is there a battery indicator when you charge it? You may try the following solution below:
    Check that the keypad is not locked.
    Make sure that all keys are responding correctly when they are pressed. In some cases, a key may get stuck and freeze the whole keypad.
    Try removing and replacing the covers (if your phone supports that feature). Check that the power and side keys on the cover are properly aligned (e.g. pushed out) to their respective positions to have a proper tactile feel when pressing the keys. 
    Keep us posted. 

  • Photo Booth flash not working in Maverick or Yosemite

    I have noticed that the photo booth flash in Maverick on my Macbook Pro and in Yosemite on my iMac is not working Screen flash is enabled on both.
    So this is happening on two different computers. Does anyone know how to fix this? All my photos are so dark on both of my computers using Maverick and Macbook Pro.
    It works fine on system 10.6.8 though.
    Has anyone else had this problem too?
    Martha

    In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick)  to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
    Martha

  • Embedded Youtube videos not working on Chrome 23 / Flash player 11.5.31.2

    For the past couple of weeks, I've not been able to play any Youtube videos that appear as embedded videos on other websites.  The small player appears with the still frame from the video and all the controls, but on pressing play, the video goes blank and won't play (the slider stays stuck at 0:00).  Nor does the full screen button work - the player just stays where it is within the third party website.  This problem has occurred across more than one website, but all sites still work in Internet Explorer.
    The main Youtube site is still working.
    I have tried all relevant steps here, to no avail (except increasing memory for a particular website, since not just one website is affected):
    http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html
    Details:
    Windows 7 Home Premium 32-bit
    Google Chrome 23.0.1271.64 m
    Flash Player 11,5,31,2
    Any suggestions please?
    John

    Thank your for your reply, Chris.
    I installed the newest version of Chrome, and the videos I have
    embedded on my blog are now working.
    Regards,
    Frank
    2012/11/30, Chris Campbell <[email protected]>:
    Chris Campbell http://forums.adobe.com/people/chris.campbell created the
    discussion
    "Re: Embedded Youtube videos not working on Chrome 23 / Flash player
    11.5.31.2"
    To view the discussion, visit:
    http://forums.adobe.com/message/4885375#4885375

  • MSI GAMING 5 - ALL USB ports not working

    hello
    how are you every one 
    i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
    Mouse and keyborad work in bios but if the system run don't work ! and trun off
    and all usb devices
    in safe mod work 
    rellay i don't know where is the problem !
    CPU : Intel Core i5-4690K
    M.B : MSI Z97 GAMING 5
    RAM : G.Skill Ripjaws X 8GB DDR3 Kit
    GPU : Gigabyte GeForce GTX 970 G1 GAMING
    SSD:Corsair force LX 256 GB
    HARD: Seagate Barracuda 1 T.B 7200 RPM
    CPU COOLER : Cooler Master Hyper 212 Evo
    PSU : Cooler Master GM-Series 750 watt
    CASE : NZXT Phantom 410
     Thank you

    Quote from: Nichrome on 28-January-15, 00:18:47
    Hi,
    What about if you try to install drivers from your product's page?
    http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
    And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
    thank you
    i just remove USB3 controller driver and work 
    thank you all :D

  • Iphone 4 camera flash not working.

    Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

    and what have you done to try and fix the situation?  Have you taken the steps recommended in the User Guide?

  • My "update all" buton will not work in the app store.  It gives me a message saying there is not enough storage to update.. I know i have storage left on the phone.  I even bought more icloud storage.  Any ideas??? Please help??? thanks

    My update all button will not work in the app store.  It keeps giving me a crazy message about not having enough storage to update apps.  Please help? I know i have storgage on icloud and on the phone itself.  Any ideas? Thanks

    Try deleting the old backup.
    Settings>iCloud>Storage & Backup>Manage Storage, tap the device name and on the resulting screen, scroll down and tap on Delete Backup.

  • Flash not working in photo booth.

    The flash in photo booth on my iMac is not working.  When I take a pic, the screen flashes but the pic is still dark.  Was working fine yesterday.  I did install the latest osx today.  That's the only changes since then.

    In case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick)  to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
    Martha

  • Why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    why does adobe flash not work in my firefox. i have down loaded it several times. it will work in explorer and chrome.

    IE uses a different version of Flash than other browsers use. You need to install the Plugin version of Flash for Firefox.
    1.Download the Flash setup file from here: <br />
    [http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
    Save it to your Desktop.<br />
    2. Close Firefox using File > Exit <br />
    then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
    {XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
    3. Then run the Flash setup file from your Desktop.

  • Java & Flash not working in safari

    Hello Friends,
    why java & flash is not working in safari?
    I have checked Java preferences, tab called general tab, and the checkboxes, both checked. java version run on the termial & it confirmed java by displaying it's version. running perfect.
    The problem is java & flash not working in safari, might be because of , so?
    when ever i open sites like web design company for project i wasn' t able to open such sites...
    kindly guide me for the same.
    Thanks,
    John Millard
    Edited by: 951029 on Aug 6, 2012 4:01 AMJavatester site<a/>, so?
    when ever i open sites like web design company for project i wasn' t able to open such sites...
    kindly guide me for the same.
    Thanks,
    John Millard
    Edited by: 951029 on Aug 6, 2012 4:01 AM

    Flash is totally unrelated to Java, so what you're saying is that certain plugins are not working under Safari of which one just happens to be Java. You're the second one I see make mention of that, but the fact remains that you'd need to ask Apple what is going on with their browser.

  • XMLP 5.6.2 - Parameters -  Both Multi-Select and All-Select  Do Not Work

    Both Multi-Select and All-Select Do Not Work.
    What's up with this behavior?
    And when might it be fixed?
    BG...

    The Multi-Select is now working, not sure what I did wrong earlier. However the "Can select all" option when building the parameter does not work as advertised, though I was able to get around that as well.
    Create a Data Model
    select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN =:SOME_VALUE
    OR
    select LAST_NAME, FIRST_NAME from SOME_TABLE where SOME_COLUMN in (:SOME_VALUE)
    Create a LOV
    Name = LOV_SOME_COLUMN
    Type = SQL Query
    select distinct SOME_TABLE.SOME_COLUMN as SOME_COLUMN from SCHEMA.TABLE
    Create a Parameter
    Identifier = PARM_SOME_COLUMN
    Data Type = String
    Default Value = NULL
    Parameter Type = Menu
    Display Label = LOV_SOME_COLUMN
    List Of Value = LOV_SOME_COLUMN
    Option
    Multiple Selection - Checked
    Can select all - Checked
    Refresh other parameters on change - Checked
    Then test your report. Select "All" from the LOV and click view. Result - No Rows Returned.
    Selecting a "Single" or "Multiple Values" values from the LOV does work.
    The way I am getting around the problem is to uncheck the "Can select all" and then manually select all the values in the LOV in order to get the "All".
    BG...

Maybe you are looking for