My page loads fine on my computer but not others.

I have been using iweb for over a year now .  The previous version worked okay, I had a few layout problems but I just tweaked some things so even though it doesn't look right on iweb, it looks good when I visit my site.
However, it only looks good when I visit the site on my computer.  When I got to any other computer (mac or pc) it looks like crap.  The font is all wrong and the layout *****, nothing is where it should be.
I've dealt with the fact that I have to place things off center on iweb in order for it to appear properly on my web page, but the fact that it only looks good on my computer is unacceptable.
How can I alleviate one if not both problems?
I've cleared out my browsers cache, but that hasn't changed anything.  I've also published at least five times since first encountering this problem and while the updates I've made have posted on my browser, it doesn't seem to affect the layout or fonts on another computer.

What's your web site address?

Similar Messages

  • I can import some songs from another computer but not others.  All the songs were purchased with the same apple id. Message says "...check connection to network..." Any ideas as to what could be causing this problem?

    Using home share, I can import some songs from my son's  computer but not others.  All the songs were purchased with the same apple id.  Err msg:"There was a problem downloading ... You do not have enouggh access privileges for this operation. Please check that the connection to the network is active and try again."  The network appears to be fine .  I can import other songs from his library.  The same songs cause me a problem each time I try.  My husband had no trouble importing the same songs I have trouble with. I get the same error message if I try to import the same songs from my husbands computer as well.  "Command I" appears to show the same protections on both the songs I can import & the ones I cannot.  My husband and son are both running OS 10.6, while I am running 10.7.  I think I had this problem even before I upgraded, but I am not certain.

    x0SiN0x:
    Welcome to Apple Discussions..
    My first suggestion is to Repair Disk. Here's how:
    Insert Installer disk and Restart, holding down the "C" key.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Please post back and let me know how that goes.
    Here are a few links that may help you to identify the issues:
    Resolving Disk, Permission, and Cache Corruption
    Tuning Mac OS X Performance
    Mac OS X System Maintenance
    Please don't hesitate to post back should you have further questions or comments, or with update.
    Good luck.
    cornelius

  • Page loads in one user accnt, but not another

    I thought this was a flash problem, so posted with that premise yesterday. I am posting again with new context:
    17" MacBook Pro, 10.6.4, Safari 5.0, Firefox 3.6, Chrome, HD about 60% full, lots of RAM.
    My MBP has two user accnts:
    1. MyHome - daily use/configs
    2. Test - used only for trouble shooting, all on defaults, no user configs.
    For a certain project application page I need to access:
    1. MyHome accnt cannot load the text and widgets in Safari, Chrome or FireFox. I just see a grid with blank fields & slider bars.
    2. Test accnt loads the page with full functionality in Safari, Chrome and FireFox. Text, fields and links/widgets all display and function as intended.
    I trashed Safari & Firefox prefs, uninstalled & updated FlashPlayer, repaired permissions, checked Network configs are same in both accnts (incl DNS), FontBook find&reconcile duplicate fonts. Multiple logout & restart.
    Neither user accnt has anything in LIbrary/Internet Plugins.
    Also, the page functions properly when accessed via another Mac running 10.5.xx & Safari 5.
    I have not encountered other pages which do not load with the MyHome browsers.
    I don't think this is a modem, browser or Flash problem. Fonts?
    How can I troubleshoot? Any advice appreciated.
    Thx

    Excellent, macjack - It was the fonts, sort of. First I looked at the things you suggested for elimination after a SafeMode start:
    *No Login Items in either account.
    *No folder named Contextual Menu Items in HD/Users/MyHome/Library, so nothing to move.
    *No items in HD/Library/Contextual Menu Items, so nothing to move.
    I did not execute a SafeMode start.
    MyHome/Library/Fonts folder would not be removed, so I moved the contents to desktop.
    Also found a Fonts folder in Aps/Microsoft OfficeX/Office and moved it to desktop.
    Then I did the dance - replace half, restart, test . The page loaded at each phase, including the last one. All the fonts are back in their folders - This was all move, not copy.
    Everything seems to be same as start of problem, but now the problem is gone. Maybe something to do with that old MS Office X suite?
    I will mark this thread answered by tomorrow and award a star to macjack. But I want to leave it open for further comment or question.
    Thanks again macjack
    -B

  • Why page looks fine in Design view but not live view?

    I am new to DW. I created a page that looks fine in design view but now I cant get it to show up in live view or the browser preview. Can some one give me some areas to troubleshoot. Most of the code is from a previous page I created that still looks fine in every view. I am not sure what I could be doing different in setting up this site.

    Thanks for taking the time to reply to question. Aftr taking a break. I came back realized I inserted the stylesheet before I changed site settings. I just needed to remove the forward slash from my stylesheet declaration. FYI for anyone else new to DW: if stuffs not showing  in Live View and Browser Preview eg background images, Go to Manage Sites and check your site setting for Links relative to: You may have switched between document and site root. Thus breaking your links to images or in my case the entire style sheet.

  • Page looks fine in live view but not fine in safari

    my index.html page looks okay in live view, but when i open it in safari some of my text is unformated. My CSS page is correct so the problem lies in my code. I have attached the html file, any help will be appreciated. Thank you!

    Thanks for taking the time to reply to question. Aftr taking a break. I came back realized I inserted the stylesheet before I changed site settings. I just needed to remove the forward slash from my stylesheet declaration. FYI for anyone else new to DW: if stuffs not showing  in Live View and Browser Preview eg background images, Go to Manage Sites and check your site setting for Links relative to: You may have switched between document and site root. Thus breaking your links to images or in my case the entire style sheet.

  • Forms 10g runs well in one computer but not others

    Dear gurus,
    i have installed my application server forms and reports 10g and manage to connect forms using mozilla firefox web browser (IE failed - i guess this one is IE bugs) in my own computer and it works very well in my own computer.
    Weird case is when i tried using other computers to load my forms with same browser settings, it will stuck at the web browser stated opening but nothing is open (grey page after i click ok on the oracle message saying installation successful).
    i even tried on the newly reformatted and reinstall windows xp computer also will have the same symptom - stuck at grey page. The problem is, i do not receive any error message beside the grey page thats why not really sure what is wrong.
    link:
    http://servername.domain.com:7777/forms/frmservlet?form=filename.FMX
    jinitiator version : 1.3.1.22
    OS: Windows XP sp2
    Browser: firefox 2.0
    Pop up enabled
    connected to 9i database
    Does anyone can tell me what can be wrong and how do i solve this please??
    Many thanks in advance

    Hi Robin,
    Looks fine to me - I saw episode 39 in the iTunes Store, and when I subscribed it started downloading episode 39.
    Explanation: ummmmm.... internet weirdness?

  • Include CD text is grayed out on one computer but not other?

    I am having a strange issue with Itunes on different computers. I have Itunes on both my home computer and my computer at work. On my work computer which is an HP, when I go to preferences>Advanced>Burning> I can select “include CD text”, and everything works fine. However, on my home computer running the same version of ITunes, that option is grayed out and I can’t select it. I have checked some settings, but can’t seem to figure out why I can’t select it on my home computer. Please Help
    HP   Windows XP  

    Ok, I finally got a chance to burn a CD using the Nero express program. Although it was a two step process; 1. burn songs to CD and 2. save tracks to CD, the song names were recognized by the Sure Thing label program, but not the ITunes program. I brought the CD to work, and put it in the computer and the ITunes program did not find the CD text there either. I would assume that the DVD/CD writer IS capable of writing the CD text to the audio CD since the tracks are recognizable by both the Nero program and the Sure Thing label program. Now to figure out why I can’t select “include CD text” in the ITunes preferences on that computer. Oh, I also looked up the model of the work computer disk drive (HP DVD Writer 640I) that allowes the selection of "include CD text" and the home computer disk drive (HP DVD writer 740I) that has this option grayed out. The specs are almost identical with the possible improvements to the later model 740I. I don't know, weird stuff.

  • Time capsule wireless works with computer but not  other devices.

    Wireless internet from the time capsule works with the laptop, but not with any other devices or computers. They pick up the wireless signal, but can't connect. Any ideas?

    Thanks for the response. I appreciate any help you can give. The internet modem is from Insight Cable and is an Arris TM602G.
    Wireless Mode = create a wireless network
    Radio Mode = automatic
    Wireless Security = WPA2 Personal
    Internet > Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off
    Internet > DHCP tab
    DHCP Beginning Address = ? I'm not seeing where to get this info.
    DHCP Ending Address = ?
    I did notice on the summary that it shows 4 wireless clients, which I assume are the computer and the other devices that can't get the internet but get the wireless.

  • Page loads on Window's Machines but not via Safari on my Mac.  Help needed!

    I need to access the following website for school, and a week ago, I could access it on my Mac via Safari, however, this week the site would not work and I kept getting the same error message that it couldn't open the site. This doesn't make any sense because I don't have this problem with any other website, and the site works just fine from any Windows PC I have used. The website is as follows:
    http://users.rider.edu/~sumutka/hpg/index.htm
    As I said, its not working on both my parent's iMac and my MacBook Pro. I've tried clearing the cache and resetting Safari and neither of those work. This is very frustrating because all links to my homework assignments are on this site.

    Strange works fine for, which got me:
    http://users.rider.edu/~sumutka/hpg/contact.htm

  • AEBS drops connection on one computer but not other

    I have no idea what is going on. I have read a few threads in the AEBSn forum about intermittent dropouts after a firmware update, but mine is an older AEBSb/g. The strange thing is that I have my iBook and my iMac side-by-side, and most of the time the iBook connects effortlessly to the Airport Network (and then the internet), while the iMac sits there scanning for a network and not discovering one. Sometimes I am able to connect to the network initially on the iMac, but then it suddenly drops to no bars of reception, and I can't get back online. Sometimes it will automatically join again, or sometimes not.
    I have taken to having the iBook connected to the Airport, and then sharing its internet connection with the iMac through the ethernet so that I can get the iMac online. I needed to do this to use Software Update to see if there were some updates that might fix this problem, but to no avail.
    Right now the iMac is online, with 2 bars in the airport, and the iBook is also connected with full strength. Sigh. I just don't understand. The iMac has been my main computer for many years, and has been connecting to the airport for the last couple of years without major incident.
    I did use the iBook to configure the AEBS recently, as I needed to change the network from WPA2 to just plain WPA to allow the iBook to join the network. But I'm pretty sure that the intermittent connection on the iMac started before I did that. In fact, I think I used the iBook to configure the AEBS because I couldn't keep the iMac connected long enough to change anything.
    This is the longest the iMac has been online in quite some time. I am also able to switch to an external disk and start up in OS X 10.3.9 on the iMac (I created this startup disk when I upgraded to 10.5). It seems to connect just fine to the network/internet. In fact, after I do that and switch back to 10.5, I seem to have more luck connecting again in 10.5. But still not full signal strength - it fluctuates between 2 and 4 bars.
    Anyway, I thought I'd start a new thread on this because of my situation with the two computers. It seems to rule out interference, anyway.

    I just want to clarify that when I say the iBook is connected to the Airport, I mean it has joined my network wirelessly.

  • How do I stop Firefox from auto-reloading pages after I close one window but not others?

    This happens when I have two or more separate Firefox windows open. If I close one, and then open a new window, it automatically goes to the sites that were open in the window I closed (as if it were restoring after a crash).
    This isn't an issue when I only have one window open, and I have already set the following:
    browser.sessionstore.max_resumed_crashes to 0
    How can I get this to stop?

    accessibility.blockautorefresh is not about restoring tabs from the previous session, but about preventing website from using the location response header to redirect to another website.
    Firefox will always reload web pages.
    Firefox always needs to reload tabs when you restore tabs from the previous session.
    *Tools > Options > General > Startup: [X] "Don’t load tabs until selected"
    If restore_on_demand is set, pinned tabs are restored on startup by default.
    When restore_on_demand is set to true, the restore_pinned_tabs_on_demand pref overrides that behavior, and pinned tabs will only be restored when they are focused.
    browser.sessionstore.restore_pinned_tabs_on_demand (pinned tabs)(false)
    browser.sessionstore.restore_on_demand (default as set in Options -> Tabs)(true)
    browser.sessionstore.restore_hidden_tabs (tabs in other tab groups)(false)

  • Wireless shows up on one computer but not other!!

    I have a MacBook Pro and for some reason no wireless networks show up. My roomate has a MacBook and the wireless shows up on that computer. Both computers can be in the same location and for some reason the internet will just now show up on my MacBook Pro!!! Please helppp this is very irritating!

    Do you have Airport status icon in your menu bar? Is it on or off? Go to Sys Prefs > Network and authenticate ‑‑ what does it say about the status of Airport? Is it off or on? If on, click on Advanced. Under Airport tab, click on "+". Can you add a network? If not, go into Sys Profiler ( > about this mac > more info > Network > Airport Card. What does it say? "No information found" or does it give you info about your Airport Extreme card?

  • Suddenly all emails show http code on 1 computer but not other one

    I have 2 computers, 1 laptop and other desktop. On laptop, I download 2 e-mail accounts. The first a/c I keep on server and pull up on desktop when at home. On the laptop all of a sudden the e-mails come up with the http code along with the text. There seems to be no problem on the desktop with the same messages. Have no idea at this time how this happened.
    FOUND SOLUTION -- The "VIEW TOOLBAR" "Message Body As" option was inadvertently changed from "Original HTML" to "Plain Text". Changing it back to "Original HTML" Solved the problem.

    Found solution. See modified reply -- LM

  • Burned DVD plays OK on computer but not on DVD player through TV

    Did all steps through iMovie to make a DVD. No apparent problems surfaced during the process. The DVDs play fine on the computer but not on DVD player through the television. Suggestions were that I was using the wrong media, that the best was DVD-R. Same problem regardless of which was used: it may play well into the DVD and have problems when selecting a chapter, a slideshow or it can happen between chapters. There's no pattern to when it will malfunction or how it will appear. It manifests itself by slowing, going to jerky play or stopping completely; these problems may or may not be the same on DVDs that are made back to back but there is always a problem of some sort. I redid the DVD without a slideshow but the problem persists. I really don't want to do it without chapters but haven't tried doing it that way.
    Any and all help will be greatly appreciated!
    Jim
    iMacG5   Mac OS X (10.4.3)  
    iMacG5   Mac OS X (10.4)  

    James-
    I suggest you try the disc on as many players as you
    can get your hands on.
    While it is good to have a player to test the final
    disc on, you can't be sure that you're not facing the
    quirks of just ONE player.
    Of course this is no help if you only own ONE player.
    The one that is your home DVD player. Many people on
    these boards will reccomend the least expensive
    player to use for testing. Often newer, less
    expensive DVD players are more reliable than ones
    that cost three times as much.
    Have you had any success making DVDs in the past?
    Very limited DVD making in the past but no problems such as this.
    I really appreciate the responses so far and will look at all options. The DVD is quite full (an earlier response made note that this could be a problem) Since this is a church program that will be used on a vaiety of players, a disclaimer may be included explaining the possible problems.
    Interesting that a lesser expensive unit could be more reliable...

  • Quick time files play on my computer but  in other computers only audio...

    Dear Forum.
    I have quick time pro.
    I am a composer so I upload a movie (mov. file) to my digital performer file...I write music, I bounce the music with the picture to Quick time movie and I have a mov. file.
    The exported file plays fine on my computer but in other computers only audio is showing, not video...
    I tried many other (pc and macs)
    Please tell me what the problem is. Does it have to do with my settings?
    Please advise.
    Thanks

    I am a composer so I upload a movie (mov. file) to my digital performer file...I write music, I bounce the music with the picture to Quick time movie and I have a mov. file.
    The MOV file extension refers to the file container and not to the compression format contained within the file. To better understand what is goin on here, you will need to open you file in QT and check the "Inspector" or "Properties" window to see what video compression codec was actually used in the file and them determine if these other systems also have this codec available for playback.

Maybe you are looking for