My Page on the OSX Server with non-iphone
Hi,
When I try to connect to an 'My Page' on the OSX server (10.6) with a non-iphone phone I don't get an login screen so I can't access my calender by phone. The phone I tried is from a minor brand called Nokia, I think they just sold just a couple of phones in the market. Is there a simplified version of the 'My Page' for the rest of the world to use?
BR
Johan
The login window is generated via JavaScript. Are you sure JavaScript is supported (and enabled) in your phone's web browser.
Similar Messages
-
Does Apple host business web pages without the OSX Server?
Does anyone know if Apple hosts business web pages other than what you would get with the iWeb app and MobileMe without the OSX Server?
I would suggest using a third party hosting service "I use IX Web Hosting. MobileMe simply does a domain mask. IX Web Hosting offers reasonable pricing, unlimited bandwidth, & dedicated IP addresses just to name a couple features.
-
How do I install Mavericks without invoking the OSX Server Plugin?
How do I perfrom a clean install of Mavericks from the Recovery Partition without it automatically installing, and then invoking or executing the OSX Server Plugin that ultimately results in rendering open directory operable as well as the server. I have ignored this continously, but the other day I went into the terminal and typed ARP -s that lists the shortname for the host of my MacBook Pro and it gave a totally different name than what I had given it in the wi-fi network interface under the WINS tab. More importantly, I do not want to install open directory nor the osx server plugin as it opens up more complexity than I want to deal with. Any suggestions is greatly appreciated. BTW, below are the steps I performed for installing Mavericks.
1. Powered on the MacBook Pro and then hit the Option key.
2. This took me into the Recovery Partition, whereby I went into the Disk Util and erased or formatted the hard-drive.
3. I then clicked out of the Disk Utility and went into the Recovery Mode by clicking on reinstall the current OS.
4. I went through all the prompts and the system downloaded a current version of Mavericks.
5. After completion, I turned on my Macbook Pro and went through the prompts to install Mavericks.
6. This is all I did, and I didn't download the OSX plugin nor invoke it in the new version of the Operating System.
I just assumed that it was a standalone version until I found the server for osx running with open directory invoked, the server invoked, along
with other components relative to a new standalone version.
Again, my question is simple: How can I reinstall Mavericks without it downloading and automatically
iinvoking the components as described above?Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.
-
Best way to integrate osx server with ms server 2004
I want to be able to manage files & users from either server, the OSX server & Windows Server 2003. What's the best road map & best practices. It's a small network of 5 computers in total. Thanks for all the help. Ben
first of all, to get rid of the duplicates, you tell iTunes to consolidate Library.
I think you may be missing the idea of what iTunes does for you. If you have content, like music, that you want to find the file of, you right click the name of the file in itunes and then "show in finder" . For things like iChat, you can simply drag and drop your music into the chat window from itunes, just like it was finder. iTunes organizes your media for you so you don't have to go looking for it.
The same thing goes with videos.
There is no reason to have two of the same files on your computer. Think of iTunes like finder, only it plays media too.
Not everyone uses itunes. Things like quicktime player, after you do a recording, will save the content into your videos folder. They're not on itunes but it uses your video folder to save the recordings. This is just one example of how your video sidebar icon folder will still be useful.
Delete the backups you have of your media unless they're in a format the itunes doesn't support, like lossess formats such as Flac, because it is pointless and wasteful to have two of the same files for music and video on your computer. -
MacBook Pro, late 2011 version. Up to date Mountain Lion.
My email account in the Mail.app is set up as IMAP, but when I delete emails in the Mac Mail App, they are not deleted from the mail clients of the other devices that are connected to the mail server with IMAP. IMAP works perfectly between Windows Outlook 2010, iPad Mail App and Android default mail client. Deleted messages behave correctly, as in delete from one device and the mail is deleted from all devices.
Having just tested in reverse order on the Mac; emails deleted from the email client on Windows, iPad and Android are not deleted in the Mac Mail App. It appears that the account is behaving like POP rather than IMAP.
Any advice on how to have IMAP work correctly on the MacBook Pro Mail.app?
Thank you.Hi Csound1, thanks. The email host is 1and1.co.uk, however, i am going to fess up and make myself look like a plonker now -
the email account in question was set up in Outlook as POP - stupid, stupid, stupid me, wasted an afternoon on this! I have now changed the Outlook account to IMAP and Mail.app works perfectly - and looks much nicer than Outlook did. Im in the middle of converting from Windows to a Mac, and still finding my way around the Mac
The lesson learned, never assume - always double check! All my other email addresses with 1and1 are all imap, except this one, and it happened to be the first one I set up in the Mail.app. (bows head in disgrace!)
Thank you anyway for attempting to help me!
Cheers -
When I send a message in a group with non-iPhone users it appears as "New Multimedia Message." One of my friends in the group also has an iPhone and his doesn't appear this way, how do I change my settings so it appears as a normal text message and not an mms?
iOS: Troubleshooting Messages - Apple Support
Send a group message with your iPhone, iPad, or iPod touch - Apple Support
Send messages with your iPhone, iPad, or iPod touch - Apple Support -
FIle Creation in the Application Server With Unicode-8 and Byte-Order Mark
Hi Guys,
I've requirement of creating a file in the Application server with the Data.
The Data Format Should be in UTF-8 and Byte-Order Mark.
I need to supply this data from SAP to PRMS.
I'm able to create a file with Unicode, but any of the guys have worked on Umicode with Byte-Order Mark, please let me know.
Thanks,
Adi.Hi Mathieu,
If you haven't found an aswer yet, you can check in transaction SE24 CL_ABAP_FILE_UTILITIES method CREATE_UTF8_FILE_WITH_BOM. You can check the code of the method (it's very short) so you can understand how it works. It's also a static method so you can call it directly in your program.
Ex:
CALL METHOD cl_abap_file_utilities=>create_utf8_file_with_bom(your_file_name).
I hope this helps.
Pax Vobiscum.
~ Eric -
Is there any way changing the priviledge after starting the managed server with the other user
Hi,
is there any way to change the user privilege after i have started the managed
server with one user.....say for example ....i have started one of my Managed
server as "root" ...but after that i wanted to make this instance work under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangitaThanks again Rob.
Rob Woollen <[email protected]> wrote:
>
>
sangita wrote:
Thanks Rob for been so quick in responding.
I have 3 questions for you:
Running a server under root is a huge security hole.My Question: 1) what are the probable security issues while runninga server under
root ?
are these security issues external(from outside world) or internal(internally
within a company) ?
Iam basically curious to know external threats.
The problem is the root user can do anything. So if someone finds a
security hole in your server, then they have complete control of your
system.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.My Question: 2) What is the harm in using port 80 for webserver andwhy do the
people wanted to bind to a port < 1024 ?
People normally use 80 for web servers because that's the well-known
port.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.My Question: 3) Suppose iam having a cluster of 2 Managed servers runningon port
7070. And Iam having a Iplanet server working as a Webserver that basicallyproxies
requests to this cluster. Then what is the best approach that i shouldfollow
in this context.....to be honest with you ....i still couldnot understandwhat
does "binding" the webserver port to a managed server in weblogic mean.
I would have your firewall redirect 80 to whatever port Iplanet is
listening on and then have iplanet proxy to WLS.
Do not run your WLS servers as root.
-- Rob
Iam sorry for asking these "silly" questions(in your opinion) ...butiam a bit
confused.
thanks, sangita
Rob Woollen <[email protected]> wrote:
Running a server under root is a huge security hole.
The usual reason people want to do this is so they can bind to a port
<
1024. ie they want their web server to listen to 80.
There is a set uid option in WLS where you start the server as root
and
then after it binds to the low port, it will switch to another userthat
you specify.
Personally I would not recommend that you go that route. I would
recommend that you start the server as a very unprivileged user andbind
it to some port (say 7001).
Most firewalls support redirecting ports. Your firewall can redirect
80
on the external net to 7001 on the internal net. That's the solution
I
would recommend.
-- Rob
sangita wrote:
<Sure, it's possible to do this, >
how to do this?
<but why do you want to do it? >
Iam not sure why this group (the other group than me) does start theirserver
as "root"...but somebody from that group asked me about this today.
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.then what is the best approach and what are the pros and cons if westart the
server as "root" OR as different user ????
please advise ....
thanks again.
Rob Woollen <[email protected]> wrote:
Sure, it's possible to do this, but why do you want to do it?
I would not recommend that you start WLS as root on your production
system ever under any cirucmstance.
-- Rob
sangita wrote:
Hi,
is there any way to change the user privilege after i have startedthe managed
server with one user.....say for example ....i have started one
of
my Managed
server as "root" ...but after that i wanted to make this instance
work
under as
"inet"
how do i do this OR is it possible ????
please advise ....
sangita -
Excuse me, does any body can help me?
Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping
I need to know if the ACS support the AAA functions but from equal ip segments (ip overlaping) on diferent places.... with diferent client networks.
We are implementing the ACS on a central site (our NOC), so each field engineer will be AAA from diferent sites, same ip networks and diferent places....
We need to implement support activities where our field engineer get access on a cisco device on the client premises, but the point is that we have a field engineer force wich get access on each device on diferent places.
With this scenary we need to decide wich is better: The appliance or the ACS Server with VMware ESX
ACS Server with VMware ESX
CSACS-5.1-VM-K9
CSACS-5-ADV-LIC
CSACS-5-LRG-LIC
CSACS-5-BASE-LIC
CON-CSSPS-5ADVLI
CON-CSSPS-5LRGLC
CON-CSSPS-51VMK
APPLIANCE
CSACS-1120-K9
CAB-AC
CSACS-5-BASE-LIC
CSACS-5.0-SW-K9
CON-OSP-CS1120K9Just a quick question - have you looked at superwaba
and wabajump? Superwaba is basically Java for pocket
pc and palm, but wabajump allows you to compile to
palm (not pocket pc). You can also use Eclipse for
development in an applet - much quicker than deploying
to device/virtual device. Small memory footprint as
well.
Cheers
Andy StrattonThank you Andy. I'll try it. Have you tried to use Websphere Studio Device Developer ?
I've tried version 5.5 but i found it not too comfortable.
I'd like to know personal experiences of the whole stack of components and tools involved
in the development process. We're trying to design the best environment for it.
Kind Regards
J.L Perez -
How do I connect my MacBook pro to the Internet through the 3G server on my iPhone?
Does anyone know how to connect my MacBook pro to the Internet through the 3G server on my iPhone?
There is a service called Personal Hotspot that uses your iPhone's connection to share with other devices. You will need to sign up for this service through your carrier. Good luck
-
Problem with Text Messaging on new iphone with non iphone users
Ever since I set up imessage forwarding to be able to send/receive text messages on both my mac book pro and iphone people with non iphones are not getting my text messages from either device.
In my settings - messages - text message forwarding it only has one device enabled which is my mac book pro. There is an option to enable my iphone. Do I need to do that? I did try and it's asking me for a code. If i do need to do this where on my phone do i get this code? Thank you.Have you tried reporting the problem to AT&T?
-
IMessage stopped working with non-iphone users suddenly
I was able to text message from iMessage with non-iPhone users after the last update and now I suddenly can't. The phone numbers are in read and the messages won't go through. What happened?
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Mail Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
Does find my friend work with non iPhone phones
Does any one know if find my friends can work with non iPhone phones
Can I see location of a friend with a non iPhone phone!?Kappa.. That seems not to be true
Cloud and find my friends work on all devices including iPod
Here is a quote fro apple site
"Comes with every new Apple device.
Every new iPhone, iPad, and iPod touch comes with iOS 5. And every new Mac comes with OS X Lion. Which means the new Apple devices you purchase are all ready for iCloud, right out of the box."
http://www.apple.com/icloud/what-is.html -
Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.
-
I have two apple ID's. One is an old one I no longer wish to use, but it is the one associated with my iPhone. How do I change to my newer apple ID on my iPhone?
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
If you have used your old ID to purchase content from iTunes or the App store, you may want to continue to use this ID for iTunes only to avoid losing your content.
Maybe you are looking for
-
my hp notebook model dv6z-700 cto, the touch pad is not working, it quit when I installed a logitech anywhere MX wireless mouse. I want to quit using mouse but the touchpad is gone.
-
Backups lost time capsule unplugged
Hi everyone... I have a small problem with my Time Capsule. The last few days kept crashing so i decided to perform a "reset" and unplugged it to plug it in again after a few seconds. It eventualy seemed it worked thou it worked fine. One week later,
-
More Than One Million Distinct Users
I'm looking at implementing Plumtree for an organization that has 1.2 million members. We're also looking at importing some profile data for tailoring content to different users. Is Plumtree capable of supporting such a large number of users? What ki
-
I can't update my MBP from 10.8.1 to 10.8.2
I recently bought a used MBP 13 (latest model) from Amazon. I can't seem to get the update to install from 10.8.1 to 10.8.2. I tried the manual download from the support pages and that won't work either. When I do that it states: OS X Update can'
-
How to re3trive my Blackberry ID password
want to know how to retrive my blackberry ID password without using ans>