My palm centros screen is blank and white

i did a hard reset on my phone cuz it woudnt stop syncing (wasnt syncing to anything)
And after i had hard reset it my phone went blank it went to a white screen and it just wont come off
I dont kno what to do
Post relates to: Centro (AT&T)

Hello FamouzStar, Welcome to the Palm Support Community.
Spontaneous HotSyncing is usually caused by liquid damage to the phone in the HotSync port area. Has this occurred to your phone?
If so, it's probably time to look at repairs or replacement of the phone...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Has anyone's screen go blank and not boot up after installing the new yosemite OS

has anyone's screen go blank and not boot up after installing the new yosemite OS

Hi Mofimac,
Thanks for visiting Apple Support Communities.
If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
Mac OS X: Gray screen appears during startup
I recommend going through these first three sections first:
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
Best Regards,
Jeremy

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new.

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

IPod Nano Screen is blank and dosen't turn on or off.

I leave my ipod nano on for 2 seconds. Screen turns blank and dosen't turn on or off. iTunes dosen't recognize it. Nothing I do works. Charging dosen't work. iPod, however seems to be on sleep mode.

After leaving the iPod to charge for a minimum of at least 30 minutes, have you tried a hard reset of the device? To do this, make sure the hold switch along the top is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Have a MacBook Pro. the computer will not boot up, the screen has black and white stripes and multi color bands as well.

Have a MacBookPro. The computer will not boot up. the screen has black and white bands with multi color bands as well.

Yeah it's dead. Take it to an Apple Genius Bar and have it checked out. Then buy a new one.

HT4623 I tried to run the new update on my phone and the screen went blank and now the only thing showing is the itunes symbol on the screen with a picture of a charger below that, it wont reset or turn off

I tried to ru nthe new update on my phone and the screen is blank and wont reset the only thing that comes up is the itunes logo and a picture of the charger beneath that how do i fix this so my phone will turn on, this has happened twice before

Hello, djernigan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeledGet more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

When I click on certain website like youtube the screen goes blank and will to open. What do I need to do?

when I click on certain website like youtube the screen goes blank and will to open. What do I need to do? I really need help

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

The iPad is stuck in recovery mode from iOS upgrade. Screen is blank and connecting it to my computer will not change the ststus. Any help would be appriciated.

While updating the iOS version on my iPad it entered Recovery Mode. The screen is blank and I can not get it to complete the recovery process. I have tried several times using both a MACBook and a Windows 7 based computer running the latest iTunes program. Is there anything I can do other than to send it to Apple repair?

Unable to update or restore
http://support.apple.com/kb/ht1808

HT1212 My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

My ipad2 (2 years old) will not turn on at all, with home key, or power on key, or both at same time. I just updated to 7.0.4 and there is a passcode, but my screen is blank and I can't turn it on.

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

IPad 1st generation turned it on and clicked on an app then screen went blank and now I can't get it to do anything at all

iPad 1st gen..help-clicked on an app and the screen went blank and now it won't' do anything-can't turn it off and it's getting hot. How do I remove the battery.

You cannot remove the battery on the iPad. If it is getting very hot, unplug it from power, if it's plugged in and set it down somewhere to let it cool off. Set it on something that cannot catch fire - as bizarre as that sounds. Set it on something that will not burn.
After it has cooled off, then try to restart it. If it will not start, try a reset.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not start up, the logo disappears. I have tried connecting the iP

I downloaded the latest iOS7 to my iPad and then the screen went blank and would not respond. I have tried pressing the two buttons together and briefly get the Apple logo but still can not restart, the logo disappears. I have tried connecting to my iMac to restore the iPad but the device does not show up (I have an old iMac). What else can I do?

You need to be running Snow Leopard 10.6.8 at the very least in order to sync your iPad with iTunes so you could update your Mac, if it can be updated, and if you care to do so.
If that's not an option, you will have to find someone that can restore the device for you with their computer running iTunes or make an appointment at an Apple Store and ask them to restore the device for you.
I hope that you have an iCloud backup, because you will lose everything on the device when it is restored.
Snow Leopard can still be purchased in the U.S. Apple Online Store.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, I would not give up on the reset technique....holding down on the sleep and home buttons at the same time until the Apple logo appears. It takes about 10-15 seconds and sometimes just a little longer to get the logo to appear.

My phone screen goes blank and after a minute or so goes back to home screen. why?

hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

Howdy mbaeguasu,
It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
So long,
-Jason

My palm centros screen is blank and white

Similar Messages

Maybe you are looking for