My Panasonic SDR-H80 is not recognised by my mac - what do I need to download?

My Panasonic SDR-H80 is not recognised by my Mac - Is there anything I need to download?

have you tried to go to panasonic's website and see if they have some osx software for that model ?

Similar Messages

  • HT4889 my source mac will not recognise my target mac what do I do?

    The source mac is a macbook running 10.5.8 and I am trying to use migration assistant to get my music to my ne macbook pro which is running 10.8.2
    I have tried connecting them with an ethernet cable and this still didn't work...
    Any suggestions??

    Have you tried resetting the VRAM and SMC:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/HT1379
    If that does not work either, you may want to book an appointment at your nearest Genius Bar for a free diagnosis as it could be a USB port problem.

  • Live Streaming from Panasonic SDR-H80

    Hello all.
    I'm writing to ask if there is any way to connect a Panasonic SDR-H80 Cam to my MacBook Pro for a "live stream" (no need to stream it over the internet, only on my screen); the problem is that this kind of Cam doesn't have a Firewire Port, so I'm stuck with the USB cable or A/V one (if there's some kind of adapter for Mac). Can anyone help me?
    Second question:
    Is there a way (software? Free possibly) to have this "stream" time-lapsed for something like 15-20 seconds?

    Thank you for your thoughts and Gongrats. It prompted me to read further and I decided to reinstall iMovie 9.0.4 from time machine. It worked and I now have the footage with sound. Turned out not to be Pain a sonic (humble apologies) but pain from unripe fruit. iMovie 9.0.6 not ripe for consumption and released prematurely.
    So, moral of the story: if you haven't upgraded to Movie 9.0.6, don't. Wait at least for 9.0.7.
    Cheers, Paul

  • Connecting a Panasonic SDR-H80 video camera

    Hi,
    I bought a Panasonic SDR-H80 video camera but can't get it connected to my iMac over USB. I turn on the camera, connect the usb-cable and selects "PC" from the camera menu, but nothing shows up on my mac to indicate any new device or drive have been added.
    Anyone been successful at this or have any tips?
    Thanks,
    ..Johan

    Based on the Amazon specs, it may be possible to load the videos onto an SD Memory card, and load that in a Mac compatible SD card reader that you can plug by USB. MPEG-2 playback component can be bought from the Apple Store for Quicktime, and MPEG2Streamclip can playback said MPEG-2 video free.

  • Ipod nano is not recognised on my mac

    I have a Mac and an ipod and a nano and have previously sync both -no problem. Now the nano is not recognised by the mac. it show 'do not disconnect' and charges ok but doesn't appear on the source list so i can't restore or sync. I've tried resetting, restarting and downloading latest version of itunes...nothing working

    Just had the same problem. Solved it by doing a reset - Turn on the iPod, toggle the hold switch on and off, then press and hold the menu & select buttons simultaneously until the Apple icon appears. (I had to let go after 10+ seconds and press the select button again to make the logo appear.) I hit select once more to clear the logo and get to the main menu, then plugged it in to my computer. Everything's running well again, and the reset did not in any way affect the music files already stored in my iPod.

  • My external hard drive is not recognised on my mac book pro

    my external hard drive is not recognised on my mac book pro

    Hello all -
    similar situation.  Unplugged external hard drive and all to take the laptop on a trip.  On return, I plugged everything back in and keep getting this message:
    Time Machine couldn’t complete the backup to “Iomega_Ext_Drive”.
    Files can’t be copied onto the backup disk because it appears to be read-only.
    You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
    open time machine preferences.   -
    I tried this and tried "repair" but that didn't work and I still get this message.  Any advice?  thanks

  • Itunes is not recognising my ipod!! says i need to install 64 bit version, it is 64 bit version though!!

    itunes is not recognising my ipod!! says i need to install 64 bit version, it is 64 bit version though!!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    Thank you for your reply.  I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years.  The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import.  Now all of a sudden my iMac does not recognise the camera.  However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing.  So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years.  I can only assume that the settings on the iMac may have changed, but I cannot verify this.

  • I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
    There are ways to do this however, try searching Google for:  Installing Logic 8 under Lion or Mountain Lion.

  • I am not able to sync my iphone 4s to my itunes because my mac software is not up to date. What do I need to do?

    I am not able to sync my iphone 4s to my itunes because my mac software is not up to date. What do I need to do?

    Is this a brand new phone?  If it is, which iTunes version does it say it requires (see side of box)?
    With a Mac running 10.5.8 you can install the last version of iTunes 10.6
    iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
    An older iPhone 4S should work with the above but if it is a brand new one I don't know.  If the box says it requires iTunes 10.7 then you will have to upgrade to OSX 10.6.8 at least in order to run iTunes 10.7.  You provide no information about your computer hardware so I can't tell you if this is even possible.
    1) Make sure your computer meets Snow Leopard technical specifications - http://support.apple.com/kb/SP575  This mostly means making sure it is an Intel Mac and has at least 1GB RAM (more is recommended).  To check RAM, go to the Apple in the upper left corner of any window, then  "About This Mac". Now continue to "More Info...".  It should say you have at least 1GB of "memory".
    2) Apple no longer carries 10.6 in its stores or online. Telephone Apple to purchase a Snow Leopard disc. In the USA: (800) 676-2775 (contact information for other countries: http://support.apple.com/kb/HE57)
    Alternatively you can buy from online retailers but anticipate paying much more than the original price which is the price still charged by Apple
    3) Backing up your computer before upgrading is always a good idea.
    4) After installing from the DVD, update your Snow Leopard installation using Software Update or manually downloading and installing the Mac OS X 10.6.8 Update Combo v.1.1 - http://support.apple.com/kb/DL1399

  • Panasonic SDR-H80 and Final Cut Express

    Does anyone know whether the new Panasonic Camcorder Type SDR-H80 is compatible with an iMac running under the Leopard OS and Final Cut Express version 4.0.1?

    Hey ,.. I just purchased the same videocam and I am having the same dilema? Did you figure something out on how to make itr work yet?

  • IPhone 5 is not recognised by iTunes (Mac)

    Okay so recently the sleep/wake button on my iPhone 5 was beginning to stop working.  Turns out that this is a common problem, and Apple were happy to replace my phone as it was still under warranty.  I went through the setup assistant and it prompted me to either:
    set up as a new iPhone
    restore from iCloud backup
    restore from iTunes backup
    I chose the last option, and the new iPhone was not recognised in iTunes.  I gave up on this and just decided to set up as a new iPhone, and decided I would restore from a backup later.  So I completed the setup and yet iTunes will still not recognise the phone.  I have tried quitting iTunes, restarting my Mac and restarting my iPhone multiple times.  I followed all of steps on the troubleshoot guide: http://www.apple.com/au/support/iphone/assistant/itunes/
    My Mac is running OSX 10.8.4 and iTunes 11.0.5 and my iPhone is running 6.1.4.

    What is the version of iTunes on your Mac...?
    What is your Macs Operating System...?
    Click on the Apple icon.. Top left in Finder...
     > About this Mac > Version...what does it say?
    iPhone 5 Syncing
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later

  • I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano anymore. I have tunes to download

    I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download

    B noir
    Yes that is correct
    Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • I have just had my hard drive replaced,I downloaded my files to a hard drive and now when I try to re start my iMac it ask's me to enter my pass word I do that but it's not recognise my pass word,what do I do?

    I have had a new hard drive installed in my imac,I down loaded my files to a external hard drive,when I tried to re start,it asked for my password,I typed it in and it did not recognise it and I can't use my computer!can anybody help me please!!

    Not sure why it's happened, but you could try resetting the password. These instructions work for Lion & Mountain Lion. If you're on Snow Leopard you'll need to use the install disk that came with the Mac.
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • I have an iPod touch 4th generation and have tried to connect it to my Sony BDV-E970W blu-ray player. The player does not recognise the iPod. What can I do to fix this?

    I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?

    As the other replier said, contact Sony. It may not be compatible with the iPod.

Maybe you are looking for

  • Smartband and Google+ notifications

    Hi There, just received my Z2 with bundled smartband yesterday - loving it so far! I only wonder if notifications for google+ will be added to the apps list, as this would make the smartband my perfect companion. Thanks for your answer! kind regards,

  • Constant Kernel Panics on Mavericks 10.9.5

    Hey Everyone, I really hope someone out there can help me out because these recent kernel panics I've been getting are driving me crazy because they always happen right in the middle of some important project I'm working on. Before I share the latest

  • App stock cant dowload

    I cant dowload app from app stock   Just let me know for assistance contact iTunes support.  I go ready also can't download any thing

  • [SOLVED]tar.gz won't install

    I'm trying to install this tar.gz file: http://sourceforge.net/projects/ifi-picloader/ I ran ./configure and I get ./configure: command not found. I run sudo make and sudo make install and they both return: [G++] Compiling PICloader... serial.cpp: In

  • Heavy frustration in multisim regarding refdes

    I'm growing very frustrated with the way multisim handles numbering the components. I've been working on a complete design (capture and CAD) for a while now and am using multisim and ultiboard simultaneously. The board is basically finished both in c