My parents keep getting collection calls for my exes bill

I would like to provide you with his new contact information. The previous account was listed as Madison County Glassworks in Canton, Mississippi. That business was forced to shutdown by the internal revenue because of years of unpaid taxes. The main phone number associated with the account was ****. His new contact information is:  ***
New Phone number is ***
Thank you. My parents are almost 80 years old and do not want to be contacted by his creditors.
[Edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]


This is a user helping user forum, thus the reason for no personal information allowed and your post here will not get the response that you need.
You will need to call AT&T or send a private message to  with your contact information and someone will get in touch with you.
Chances are, that this is a collection agency and they are calling whatever contact information they have. You may need to contact the collection agency directly and advise them of the contact information.

Similar Messages

  • I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    update directly, http://www.adobe.com/downloads/updates/

  • I keep getting a 'Looking for backup disc' message from my  Time Capsule.

    I keep getting a 'Looking for backup disc' message from my  Time Capsule. I have set it up several times without any apparent problems (I have even done a Hard and Factory reset). Everything seems fine until I ask Timemachine to 'back up', and then the problems start.
    Any ideas?

    I had the exact same problem. I bought the Time Capsule this past July and it worked fine for about a month then it told me it hadn't backed up in 10 days and was stuck looking for the backup drive. I called Apple and they said the reason was that the Time Capsule was in Bridge mode. I launched Airport Utility and sure enough, it was. I changed it to DCHP and NAT (Airport Utility -> Network tab -> Router Mode). After updating the Time Capsule, I couldn't even get on the Internet, let alone do a backup. A logged into the software for my cable modem and discovered that it too was in Bridge mode.
    It turned out (for me) that neither should be in Bridge mode (which is for connecting two networks). Your cable modem only has one IP address. Your Time Capsule should be doing the NAT (Network Address Translation) which translates the internal IP addresses on your network to the one IP address your cable modem has. When I switched my Time Capsule to DHCP and NAT, it conflicted with the fact that the cable modem was also trying to do this. The answer was to turn this off on the modem (allowing all the packets to just go through the modem to the Time Capsule and let IT do the NAT). I did that last week and since then, my Time Capsule has been working perfectly.
    1) Go to your cable modem (via a browser, enter "http://192.168.100.1"). Log-in and find the setting that indicates NAT. If you're uncomfortable doing this or can't find it, call your cable company and ask Tech Support to do it for you. They can do it remotely.
    2) Launch Airport Utilty. Go to the Network Tab and change the router mode to "DHCP and NAT".
    3) You may need to restart your modem and Time Capsule. I can't remember if I had to or not.
    I hope this helps. I tried many things but this is the only solution that fixed it for me. And it makes sense. Only one device, the cable modem or the Time Capsule, can be doing the NAT.

  • Keep getting missed calls/missed group calls

    Something really strange has been happening for the past week or so. I keep getting missed calls/group calls from "Bastian" and "Anonymous", none of these people are on my contact list and my iphone never rings when they try and call me. I just get a notification to say "missed call". The strange thing is when I swipe the notification to check my skype history none of these calls exist. There is never a missed call on skype for desktop either. On my desktop I have my privacy set to "only allow contacts to call me". Please explain what is going on with these ghost calls and how I can prevent this?

    Hi, I've got the same problem. Tried everything including contacting the person and asking to leave me alone. Nothing seems to work. Hopefully someone knows the solution

  • Keep getting a request for password "for the CalDAV account for my email account when I log in my iPhone password. ????

    I keep getting a request "for the CalDAv account" when I log in using my iPhone password on my iPhone.  Just started happening.   ????

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Keep getting auto updates for printer which I no longer have.

    I uninstalled my canon inkjet printer.  At least I believe I did - it doesn't come up when I run a search on Finder.  However I keep getting auto updates for it, which I would like to stop getting.  I may be slow but can't figure out how to do this.... thanks.

    Try going to the hard drive level Library/Printers and delete the Canon folder there.

  • After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    After upgrading to OS X Yosemite, I keep getting popups asking for my "Local Items" keychain for cloudd, calendar, messenger and on and on...and then it wants me to change my password, only won't accept it when I do.

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried, testing after each one, until it's resolved. Back up all data before making any changes.
    Step 1
    Follow the directions in this support article.
    Step 2
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select the iCloud keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password.
    Select
              Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain.
    Step 3
    Open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
    Step 4
    Open the Keychains folder as in Step 1. There should be a file in that folder with the name "login.keychain". If there is also a file iwith the name "login_renamed_1.keychain", then please do as follows:
    ☞ Rename login.keychain to "login-old.keychain".
    ☞ Rename login_renamed_1.keychain to "login.keychain".
    You can then close the folder. 
    Delete the login keychain from the keychain list in Keychain Access. Choose
               Delete References
    when prompted, not Delete References & Files.
    Select
              File ▹ Add Keychain...
    from the menu bar. Add back the file now named "login.keychain". If any of your needed keychain items are missing from it, also add back the file now named "login-old.keychain". I suggest you transfer any needed items from that keychain to the login keychain, then delete it. The transfers are made by drag-and-drop in Keychain Access. You'll need to enter your password for each item transferred. 
    Run Keychain First Aid again. Quit Keychain Access.

  • Trying to sync ipad keep getting a waiting for changes on desktop

    trying to sync ipad to itunes on my mac and i keep getting a waiting for changes on my itumes

    "Waiting for changes to be applied": Apple Support Communities

  • Can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??

    can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??

    hi,
    there's some microsoft support to this issue. check here http://support.microsoft.com/kb/2008385 
    regards.
    From out of Nowhere

  • This is the closest community that might solve the followingroblem:  Icloud is supposed to work from a pc.  It works fine from my iphone and ipad but not my pc.  I keep getting the error message: ApplePhotostreams.exe has stopped working.

    Iclouds is supposed to work from my PC but doesn't.  Loaded the program several times.  I have all the corrected software.  I keep getting the error message: ApplePhotoStreams.exe has stopped working.  Anybody out there that uses icloud with a PC???

    I've got the same problem and can't find a solution for this problem...

  • Download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

    download doesn't work; i keep getting "unable to find firefox.exe" even when I open from program files folder; working onwindows xp with service pack 3

    As you can see below, when I right click, I have no such option.  In the User Account Settings, I'm operating as the "System Administrator".
    Any other suggestions?

  • I cannot sync my iPod.  I keep getting the following messagei:  AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    I cannot sync my iPod.  I keep getting the following messagei:  AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll  Help!

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • Why is VO getter not called for custom VO attributes?

    Hi,
    The requirement is to add couple of fields on a OAF page. Here is what I did:
    - Created custom VO by extending the standard VO
    - Added fields to the page via personalization.
    The issue is that the values for the custom fields on the page were not showing up. On investigation, I found the VORowImpl getter getAttrInvokeAccessor was not being called for my custom attribute. I tried to check the difference between the attributes for which the getter was called and for which it was not called. I couldn't find any and I'm totally left clueless as to what determines the getter to be called.
    Really appreciate your help to move ahead.
    Thanks,
    Anil
    Edited by: AnilMenta on Mar 5, 2013 10:40 AM

    Hi Anil,
    First of all, Could you please make sure that Extended VO is being picked up during the execution of the page . Ensure that extended VO is substituted
    If the VO is substituted then try Steps below
    1. Enable the diagnostics .. show log on page statements
    2. Search for your custom VO name .
    If you can find your extended VO here, then substitution is right and page is picking up the extended VO.
    Thanks

  • Nokia 1320 keeps getting imap error for gmail acco...

    heh guys, am seriously thinking of smashing this thing. salesgirl told me it was awesome but that hasn't been my experience so far.
    All I wanted to do was get emails on my phone.
    Upon enetring mail icon set up keep getting message saying "Google account info is incorrect, update your account info for imap.gmail.com:993:1
    but the correct info doesn't change anything
    I have tried signing in and out of google account in phone browser, have confirmrd number is verified with Google.
    any suggestions much appreciated or will be hammer time.

    You have installed a Mail plug-in that could have a bearing in this:
    /Library/Mail/Bundles/GrowlMail.mailbundle
    Why don’t you people try (properly) uninstalling those things as a first troubleshooting step when applications start to misbehave?

  • Getting numerous calls for the people who used to live here

    At least 2 -3 times a day, i getphone calls for the people who used to live in my house. They are all debt collectors and i have told them that they do not live here but it doesnt matter. Short of looking up their new number and giving that to the debt colllectors, what can i do?

    Your problem has nothing to do with Verizon and everything to do with debt collectors...
    When these individuals call, take down the number (from the caller ID), time and date and tell them the following:
    a) That the party that they're looking for does not reside there anymore.
    b) That you are recording the calls (and indeed do so) and that you'll be forwarding the tape to your attorney who will sue them for violation of Fair Debt Collection Practices Act.
    c) If they don't stop, sue them. You can recover up to $1,000 for every violation that is proven in court.
    Happy hunting.

Maybe you are looking for

  • Failed in last step of installation of Bootcamp 4.0 Windows 7

    My MBP is the mid-2009 model with 2.53Ghz and  4GB RAM. I later made an upgrade by taking out the Optical disc drive and inserted a SSD drive. Then not long ago after Lion has been released, I installed Lion on my SSD while putting home folder in HDD

  • Random seed

    Hello All, I hope this is the right forum for posting this thread. I want to know how I can use the Random class, and get the time. I know i can do like this right java.utilRandom rand = new Random(System.getCurrentTimeInMilliseconds()); This would g

  • Hrsp load sharing

    Hello, If I have two nics on a server and two core switches running hrsp with load sharing. If I connect each nic to each core. So nic 1 goes to core switch 1 and nic 2 goes core switch 2. My question does hrsp load sharing let both nics send traffic

  • 24fps project. Q&A

    I'll working on a project in the upcoming weeks, is an animated/video. The video footage is standard DV 29.97fps, the animated part of the project will be done at 24fps. The end result of the project will be for standard video, DVD. What will be the

  • Cost Break Up of Internal Orders-Overhead

    Hi mates, I have created an internal order with an object class: u2018Over Headsu2019, for which costs were pooled and finally internal orderu2019s balances, are to be settled against the FG material. I want to see the cost components breakup for the