My password is not the same after install

After installing lion - my password has somehow changed - the hint says new version

I spent a little time trying to figure out if there's some setting anywhere that might explain this, but couldn't find anything. That doesn't mean there isn't any--I just don't know of any.
I'm wondering if you could take a screen shot that shows the stage size versus the swf size when it plays? It will help to make sure the problem is what I think you have it explained it to be.
Does this happen in all files you create or is it occuring just in one particular file? What version of Flash are you using? If you can make your file available maybe someone can see if the problem remains when they open it--possibly even track down some cause. I am unable to open CS4 files (don't have it), but if it's an earlier version I can take a look.
If you are using CS4, have you updated it to the latest release (10.0.2, I believe)? There were numerous bugs when CS4 was released, though I don't know if this would be one of them.

Similar Messages

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

HT204053 Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT KNOW it. Thanks!

Seems my iCloud password is not the same as my iTunes. Where do I go to reset my iCloud password? I cannot access anything when prompted to put in my iCloud password because I do NOT know it. Thanks! I've used my iTunes password for everything else Apple does and would like to use the same one for my iCloud.

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

HT5312 how do i reset my admin password, my apple iD password is NOT the same as my admin login password

all ive been seeing is that i can reset my password with my apple iD, but its not the same. and it doesnt do the command R thing or the terminal/utilities thing. so what do i do??

Phil,
First of all, to log in as the HTML DB administrator, you want to use a different page, one that ends in /pls/htmldb/htmldb_admin Try logging in there. If that doesn't work, see this thread about creating a new admin account:
stupid password tricks
Sergio

Camera Raw Bug: Preview not the same after clicking OK

I am opening a Canon CR2 camera raw file. I dial in the exposure how I would like it in the Camera Raw dialog (8.8), but after I click OK, then image opens in Photoshop (CC 2014) and looks different. It looks more washed out. I took a screen shot of the image after it is opened and the camera raw dialog with the exact image. You can see the difference. I measured the pixel intensity just to make sure my eyes weren't playing tricks on me, and the image after it opens has a different exposure.
I use Spyder color calibration and a GeForce 670 with the latest drivers.
Stuck!!!

Also:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error in Dashboard "Your Office 365 password is not the same as your Windows password."

I have 4 users using Windows Server 2012 and Office 365 for email. All is going well, but I am now getting the error listed in the title.
When I first set this up, the passwords were the same, and integration worked very well. After the users changed their passwords on the domain, this error started to pop up.
Question: Is there a specific way the users have to change the password to have this sync continue? If they change the password by Ctrl+Alt+Del and choose change password, will this keep it in sync with Office 365?
Thank you for time and answers.

Hi,
àI have 4 users using Windows Server 2012 and Office 365 for email.
Did you mean that had enabled Integrate with Microsoft Office 365 service on the Windows Server 2012 Essentials?
Would you please let me confirm something more?
When changed password and synced to Office 365, there will spend some times. Please check if this error still pop up. Or had disappeared?
Please check if encounter issues when users logon client computer via the new password in the domain environment. Meanwhile, did there any issue occur when users use emails
or sign in office 365 by using the new password?
If any update, please feel free to let me know.
Best regards,
Justin Gu

Folders&ScreenMagnifying not the same after SnowLeopard upgrade.

Magnifing my screen and scrolling up to make the pic bigger works just fine but the screen nolonger moves with my mouse, it just magnifies ( it wont move to the left or right) and double clicking on a folder and dragging it back and forth from the bottom right corner use to make the pics in it bigger or smaller but not anymore, the size stays the same no matter how much i drag it, the box moves but the pics and icons stay the same....how does one fix this?

The setting you want is in System Preferences>Universal Access and turn Zoom on. You also have options and keyboard shortcuts shown.

Apple ID and iCloud Passwords are Not the Same

iCloud uses a different password to login than my Apple ID which I use for iTunes and everything else I do with Apple. Can I change my iCloud password to match my Apple/iTunes ID or will that cause problems like those I've seen noted on forums? OR, is it a good idea to keep the passwords different since my Apple & iTunes ID is connected to my credit card?
Note in Case this Applies: I am running iTunes 11.1 on my MacPro in OS 10.6.8 Snow Leopard and will upgrade to Mountain Lion in October and then Mavericks when it arrives (if stable). I am about to install iOS 7 on my iPhone 4s (64G) and iPad 4 (32G).

Can I jump onto this discussion with a similar problem.
I updated the OS on iPhone 5 and Ipad to get the latest security updates. Since then I cannot access my icloud account. I have tried changing the password and get to the point were I am sent a verification email and advised to;
"Check your email and look for a verification email from Apple. Click on the Verify Now link and sign in with your new Apple ID and password". Unfortunately there is no "verify now link"
Consequently I can no longer access my account. Any ideas?!

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

Not the same after using in Target Mode

At first the computer refused to link to the monitor. And failed to with other monitors as well. But, through Target Mode, I hook the Mac Mini to a MacBook, went to StartUp Disk and selected the Mac mini. Voila, I could use my Mac mini and my user account with the following exceptions: no printing services, could not search using Find or Spotlight, and no access to the network through Network>My Network (I could access the network from Connect to Server). After backing up and deciding I could be without my Mac mini for a few days, I took it the Apple Store and they replaced the logic board in ONE DAY!
The Mac mini boots up fine and I can use the monitor again. However, I still cannot search with Find or Spotlight, add a printer (error message: server-error-service-unavailable), or access the Network>My Network (users do not list) nor do a broadcast ping and see everyone on the network. Seems like it is stuck in Target Mode. I have looked through discussions and tried different solutions for each of these issues separately without success. I was unable to find a solution using a combination of this problems. And there may be more issues I am not encountering.
Any help would be greatly appreciated.

New this morning when reading email. A virus slipped through the SPAM and visurs protection software. Upon reading an email, I closed the email to delete and selected to delete the attachment (which I did not open), and the monitor flashed and the email appreared on the screen. Ran ClamXav which noted there was an exploit in the database file of Entourage. Here's the log from ClamXav.
Scanning /Users/tedigreyowl/Documents/Microsoft User Data/Office 2004 Identities/Main Identity/Database
/Users/tedigreyowl/Documents/Microsoft User Data/Office 2004 Identities/Main Identity/Database: Exploit.HTML.USBank FOUND
The database holds my email and I would like to eliminate the problem without throwing out the database file. Any ideas?

HT4865 my icloud password is not the same as apple password. I can not change on phone under icloud account info

Recently change my e-mail address.
changed everywhere but icloud. can log on icloud on pc but keep getting error on phone icloud password or e-mail incorrect. on phone icloud account shows old apple ID.
Need help changing this id on my phone.
I checked one of the questions already asked listed on the right of the page & it solved my problem.
THX
Message was edited by: wynola
Message was edited by: wynola

Start here, change your country if necessary and go to manage your account and request another email.

I have an internal website that requires a password but not will load after installing v37.0.1

I have attempted all the fixes suggested and nothing works. I don't even get an error. I am just asked to enter my password again, and again, and again.

Does your internal site use an older version of ssl or a self signed certificate?
In the meantime you may need to force Firefox to fallback to TLS 1.0 or otherwise force TLS 1.0 (i.e. set the maximum to 1.0)
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
# Change '''security.tls.version.fallback-limit '''= 1

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7

Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

HT204053 Although I have iCloud, my system preferences still show Mobile.me. I have to sign in with my mobile.me ID which is not the same as my Apple ID. I want to change my iCloud ID and password. How do I do it?

Although I can access iCloud, my system preferences on my iMac still show Mobile.me. I have to sign in with my mobile.me ID which is not the same as my Apple ID. I want to change my iCloud ID and password to be consistent with my Apple ID and password. How do I do it?

you need to be running OSX 10.7 or 10.8 to use iCloud i believe. It shows you are using 10.6.8 which doesn't support iCloud.

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer, and so as my password consists of numbers, letters and symbols my ipad keeps showing that my password is incorrect! Is there any way around this problem please?

When I try to buy ibooks from my ipad, the virtual keyboard is not the same as my computer keyboard, and since my password consists of letters, numbers and symbols, the ipad keeps displaying "incorrect password". Is there any way around this please anybody?

katykittenoid wrote:
the virtual keyboard is not the same as my computer keyboard
Are you using the virtual keyboard to input your password and you cannot see/find the characters you need on that keyboard?
Or are you trying to use a bluetooth keyboard and pressing the printed key does not produce the right character?

My password is not the same after install

Similar Messages

Maybe you are looking for