My password lock cannot be turned off (button is greyed out and does not react) and I cannot set to "simple" password (4 digits) for the same reason (button greyed out)

Today, I got a message from my iphone 4 telling me that my password was expired and that I had to change it.
Now I am forced to enter a 8 character long password and I cannot turn off the password lock (button is greyed out and does not react) and I cannot change to "simple" code.
I am so upset that I am considering throwing the bloody thing to the rubbish bin
Can you help?

Have a work Exchange account on your phone? These policies can be enforced by a profile installed on your phone. There is nothing you can do to change this except delete the Exchange account.

Similar Messages

  • The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. O.O?

    The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
    No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
    03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
    03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
    03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
    03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
    03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
    03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
    03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
    03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
    03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
    03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.

    Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.

  • I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?

    I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?

    AirPort Utility is in your Utilities folder:

  • IPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    iPod nano version 6:  random turn off, volume controls don't work, does not turn off, skip does not work.  Two years old!  Next version of nano has no clip and same amount of storage.  I do not want to give up my version 6!

    Make a Genius Bar appointment at your nearest Apple Store and pay $75 USD for an out-of-warranty replacement.

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • HT1476 ever since I upgraded to ios 7, the battery life is very short and I do not use my ipad all that much.l have been on the phone to apple 3 times, turning off all kinds of things I so not use and have powered off more than before but it is still poor

    ever since I upgraded to ios 7, my battery life is very short. I do not use the ipad all that much and have to charge it twice as much as before. I have been on the phone to Apple 3 times and turned off a number of things that I am not using and now power it off more regularly but still not happy with battery life. It is less than a year old and as I said, I don' t use it all that much

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • HT4098 How do you turn off an auto renewing subscription that does not show up within your account?  I applied for BBC iPlayer but wish to cancel the subscription, I have followed advise above but my account does not have a subscription section within set

    I have two Apple ID's as I am currently in Italy and when I first set up  my Apple ID it acknowledged my current location.  However when I applied for BBCiplayer I had to set up a different ID with UK address.  I thought maybe I was looking at the wrong account so used the e-mail address to which the auto renew receipt had been sent and followed the "forgotten Apple ID" link which prompted me for a new password.  Set up new password but whenever I try and log into account I am not asked for password and ID it just automatically takes me there (so unable to switch accounts). 

    What do you mean 'not asked for password and ID it just automatically takes me there' ?
    If you are using your computer's iTunes then you can log out of an account via the Store > Sign Out menu option, that will then change to a Store > Sign In option
    Is that what you are doing ?

  • I recently bought a 2008 mac pro which came with leopard 10.5. I can't load any new programs because it calls for a password, but it won't accept it. I bought new snow leopard 10.6.3 but I can't load it for the same reason. How can I completely reboot.

    Help. I recently bought a 2008 Mac Pro from Mac of all Trades. It came with Leopard 10.5 installed. When I set initially started the computer, I followed the instructions on the screen. I was asked to set up a password which I did. Since I'm very forgetful and not too tech savy, I wrote it down as I typed it in. I first went to install Office Mac 2011 but when it asks for a password, it won't accept the one I set up. I was told that if I bought the new Snow Leopard 10.6.3 and installed it, that it would reset everything. Well, it won't allow me to load it without the password. I am new to Apple - this is my first. I have always been able to "reboot" a computer with discs but I'm not sure how to do this one. Is there a way to do it without the password and reset everything? Could somone please email me
    Thank You. David Moore
    <Email Edited by Host>

    If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
    If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
    Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
    Follow the prompts, erase the disk and install OSX Snow Leopard.

  • I get asked for a password when i did not yet set one (after a system reset for the same problem)

    I am getting asked for a password when i have yet to set one.  I have already done a reset and am still getting prompted for a password, which I do not know.

    If you can't remember the Restrictions passcode you have to either:
    - Restore the iPod from a backup that does not have the passcode, or
    - Restore the iPod to factory settings/new iPod.
    iTunes: Backing up, updating, and restoring iOS software

  • HT1435 My Nano 3rd Generation suddenly stopped working. It is a refurbished, not old (to me) and does not get much use. I put it in my pocket with the head phones plugged in & the power off. Now I get nothing, not even the charging symbol when I try to ch

    Hello, My Nano 3rd Generation suddenly stopped working. It is a refurbished and I do not use it ofetn and keep it on the charger. The one night I leave it in my pocket with the head phones plugged in and the power off. it stopped working. I thought it lost it's charge so I put it back on the charger. Now I do not get the charging indicator. Is there anything I can do?

    Probably needs a new battery. 

  • My iphone 4 switches off unexpectedly and does not charge properly every time

    My iphone 4 turns off unexpectedly and does not charge properly every time. Can anyone help

    Hey bigstu29,
    Thanks for the question. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • My ipod is not starting its turn on but looks like sync. and does not stop

    My ipod is not starting its turn on but looks like sync. and does not stop and screen is black

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT4113 ipad password is giving me problems, works on wallpaper to unlock but does not work for restrictions or reset

    ipad password is giving me problems, works on wallpaper to unlock but does not work on reset or restrictions

    You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • IPhone completely stacked - cannot even turn off

    I have had calendar sync problem for a long time. I removed iTune and reinstalled the latest version again. While I was trying to restore my iPhone hopefully to solve the sync problem, my iPhone was stacked. Right now, the apple mark appears on the iPhone and a timer (it's like an analog stopwatch) keeps moving (rotating). I cannot do anything. I cannot even turn off the iPhone. Can someone help? Do I need to run its battery out?

    I've had this problem as well. I can hold down the two buttons for 2 minutes and NOTHING WHATEVER HAPPENS!!! I've tried pressing them simultaneously, tried doing each one first before the other - etc. None of it works.
    It is simply impossible to turn my iPhone (1st gen, 16 MB) off. It just won't shut down. And since that is the standard instruction whenever anything goes wrong with the iPhone, it kind of leaves me stuck.
    So what on earth are you supposed to do IF THE DANG THING WON'T SHUT DOWN?????

  • My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
    Good luck!

Maybe you are looking for

  • Does "Open Vi Reference" work differently in 8.5 if a string input is wired to vi path?

    SO I was reading the upgrade notes to labview 8.5 and I noticed a change in the "Open VI Reference" function.  In 8.2 you can simply wire a string of the vi name to the vi path input of the function, and labview will open a reference to the vi alread

  • I have to find out which user exit useing

    Hi All, functional consultant useing user exit ,for substitution of profir center. can any body plz tell ,which user exit he useing to get profit center value. thanks, venu.

  • Redistill to change page size?

    I received a request from a colleague to redistill some pdf files in order to change the page size from A4 to Letter (8 x 11.5 to 8.5 x 11) Can this be done? If so, how? I'm using Acrobat Standard V7.0. Thanks for any help.

  • CAn i put itunes TV shows on my PSP

    I have an ipod but i would like to put some Itunes shows on my psp. I can figure out how to do it. I jsut wanted to know if the shows would play in any thing other then an ipod

  • Vnc = cpu 100%

    using vnc in mac, and if your vnc windows is keep repainting, even that windows is not the current screen, the cpu will still 100%