My Pavilion DMT-1000 shuts down immediatel​y when it starts to boot up.

HP Paviliion DM4T-1000 running Windows 7 shuts down as soon as it starts to boot up.  It passes the startup tests, but it shuts down after about an hour doing the hard disk test.  It also shuts down from the boot menu after about an hour. The fan is running full speed at all times and the airflow is perfectly good.  I have tried reinitiating the BIOS by removing the internal battery and doing a hard reboot.  I have tried booting off of a CD and using the F11. Everything results in immediate shut down. Should the fan be running full speed immdediately?  How can I tell if the BIOS thinks the temperature is too high?  Is there a test point to monitor?  What else can cause a failure to boot?

With the limited information you have provided, look at this comprehensive troubleshooting document:
https://discussions.apple.com/docs/DOC-3353
Ciao.

Similar Messages

  • I have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant  . it is asking the passwoerd and i dont remember what is the password . please help

    i have purchased a new macbook pro model no 840ll/a after the first installation i shut down the coputer. when i start gain i cant  . it is asking the passwoerd and i dont remember what is the password . and when i give the apple id password it is not accepting  . what to do

    i am able boot my system because of wrong password  . how to open

  • Where can I download an earlier version of firefox. Version 4 does not shut down properly so when I start it again it says firefox is already running. I'm very close to going back to Internet Explorere

    Firefox 4 doesn't shut down properly. If I close it and reopen it later it tells me firefox is already running and I end up restarting my computer.
    This is the shits

    You may still have a Croatian language pack installed if you didn't uninstall a previously installed Croatian version and checked the Firefox program folder for remnant leftover files.
    * "C:\Program Files\Mozilla Firefox\chrome"
    If you download the full en-US version and install that version then the language shouldn't change.
    * [[Updates reported when running newest version]]
    * http://kb.mozillazine.org/Updates_reported_when_running_newest_version

  • How to turn on and shut down Xserve RAID when G5 starts

    Hello,
    Finally i Put my Xsevre RAID in the Aiino ClusterMaster 12U
    connected with the G5 via the two fibre channel and one ethernet to control start up and shut down.
    Since I don't leave the machine always on when not on schedule, everytime I Start the G5 I have to launch RAID Admin, erase the system, add a new one, enter monitoring password (that switched back to factory default), and start the Xserve (and I have to enter management password).
    Is there a Script or something like that that runs automatically when I start the G5 and when i switch it off, so I don't have to do all these steps everytime including unmouting the Xserve prior to shutting It down?
    thank you in advance
    umberto
    G5 5.5Ram 3.5 Tb Xserve 23"cinema Fcp   Mac OS X (10.4.3)  

    Hi there,
    You may need to force quit the application. Take a look at the article below for more information.
    Mac OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    -Griff W.

  • Everytime I shut down my computer, when I start it back up it opens 10 to 15 applications

    What do I need to do to keep my mac from popping up 10 to 15 applications when I start it up  after it has been shut down?

    Launch System Preferences and click on the “General” icon
    At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”

  • Pavilion 23 bw shuts down after few second after my pc booting.

    So I just bought two Pavillion 23 bw to dual screen. When I try to boot up my pc with only one connected the screen shows a sign of life by showing me the windows loading screen but after few seconds, fall into sleep mode and dont want to recognize the pc anymore. I tryed multiple times, no succes. The drivers have been installed and the DVI cable and port is the same I used for my previous screen. The port in question is from my graphic card which is a Radeon 280x.
    Can you help me please!

    Only one of them is doing this

  • Can i create mcx for shut down properly mac when battery is less 5 %

    Hi hello
    Can i create mcx for shut down properly mac when battery is less 5 % ?
    Thanks for your reply

    You can create a mailing list by using the "Groups" feature of Address Book. Simply select "New Group" from the File menu. Name the group, and drag the contacts you need into the group.
    In Mail, open up Preferences (under the Mail menu), and click on "Composing". Then make sure that "When sending to a group, show all member addresses" is unchecked.
    The auto reply is a feature that is better done on your mail server, as you Mac can only send an auto reply when it is on, with the Mail application open. If you use dot Mac, you can set up a vacation responder through the web, and you can leave your computer switched off.
    If you really want to leave your Mac on when you are on holiday, you can set up a mail rule (Preferences, Rules).

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • Shut down of computer when exporting

    Hey guys,
    I've been reading forums for about a half day now and need some help narrowing down the problem.
    Essentially, my computer turns off in the middle of an export. Usually reboots fine, but one time it would shut down after 5-10 seconds, without even booting windows (which causes me to think heat issue). After a several shut downs, it started back up
    From all my reading it seems it is either heat, motherboard, or power supply.
    I've found that my system goes up to 70C (158F) when exporting. It may be even getting hotter.
    My CPU is running at near 100%
    All my allocated ram 13GB out of 16GB is mostly being used - shows 12.7GB
    This is my system build
    i7-2600 CPU @ 3.4GHZ 4 cores
    4x4 GB Ram Corsair 1600C9
    2x1TB raid 0 blue hard drives (Western Digital Sata 6.0 32m)
    GeForce GTX680
    OCZ vertex 3 - 120 GB SSD 6gbps
    Asus P8P67 Deluxe
    Corsair TX850W
    Cooler Master HAF 932 Advanced Full Tower EATX
    This is a HW monitor screen grab on a successful export when the computer DID NOT shut down.
    After the export, my cores go back down to the 30C range.
    Looking at my event viewer, I get the Kernel-Power error when my computer has shut down.
    I'm fine adding a cooling system (more fans or liquid cooling). I'm also fine with changing out the power supply or getting a new motherboard. What I do want to figure out is which to try first and what's the most likely cause.
    Thanks in advance!
    Greg

    Are you using the stock Microsoft CPU cooler, or an aftermarket brand... and which one?

  • Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...

    Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...
    G. Mendel

    Crashes
    The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select.  Now I cannot open a file in my finder window by double clicking on it.  Any suggestions?

    My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select.  Now I cannot open a file in my finder window by double clicking on it.  Any suggestions?

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

  • My I phone 3gs shuts down suddenlly but when i removed the sim it is working without shutting down suddenlly again when you insert the sim it started shutting down suddenlly

    My I phone 3gs shuts down suddelly but when I removed sim card it started working without sudden shut downs, again when I insert sim card it started shutting down suddenlly.

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

  • Should I shut down my computer when not in use

    should I shut down my computer when not in use, overnight for instance?

    Hello! Leaving it on 24/7/365 is perfectly acceptable. You may save some electricity but personally I think you'll pay for it with a more troublesome system. I do however set the monitors to go to sleep. I like the no startup lag time of running 24/7/365. That said, if I lived in an area prone to electrical outages or if my location was prone to lightening strikes I'd probably shut it down and unplugged. Of course with it being unplugged the pram battery may run down. These old G4's have been running 24/7/365 for years now. I do try to restart every few weeks just for good measure! In the end it's your preference. The hardware works best when a constant temperature is maintained. Tom

  • How to avoid shut down BPELPM Server when creating a user?

    Hi,
    How to avoid shut down BPELPM Server when creating a JAZN user and after doing changes to user-properties.xml?
    Thanks,
    Jorge

    this configuration is only supported on a midtier - there is a work around for a standalone install, nevertheless I would not recommend this for production ..
    if this is NOT a production enviroment - I can try to get you the information .
    /clemens

  • HT4623 when i make software update my i phone shut down and it can't start it always Show the apple mark and then disappear i can't make any thing what the problem and what the solution thank you

    Dear gentlemen:
       i know how can update ios update but when i make update my iphone shut down and it can't start.
      it always Show the apple mark and then disappear i can't make any thing i need know what can i do ?
    thank you

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • Not able to sign a document with Adobe Pro X, XI

    Every once in awhile I am getting an issue with Adobe Pro X and Adobe Pro XI when trying to sign a .pdf. The document looks OK, the first signer places a signature. The second signer starts with drawing the new signature rectangle, enters the passwor

  • VI Calling A SubVI

    Hello all - Trying to debug this situation...I've got a control VI.  It contains a boolean control.  When this boolean control goes true, I'd like for the SubVI (Software Change Reqest) to open (Not just "Show" and "Hide" with property nodes).  This

  • Is it possible to set a subject in a mailto link?

    It would be nice to set a subject in a mailto link when you create it in Muse. The subject of the mail that is already there for the user, also very handy for the person who receives the mails, to organize and see quickly on which subject the mail wa

  • Universal SPREADSHEET app iPhone + iPad

    So I have an iPhone 4 and an iPad wifi only. Which is the best app to handle spreadsheets? I need it more for searching and reading really really really long spreadsheets and i would prefer an app that works both on the iphone and ipad (not having to

  • IPod touch is fully charged all the time

    Hi! I have a Sony FM/AM Clock Radio (Model ICF-CS10iP) that plays iPod/iPhone, and when I connect the iPod to the radio in order to play it, the battery is recharged very fast, so that my iPod is always fully recharged. In other words, I don't have t