My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

error at start for hp dv2410us stops at black screen with the next error message
error 104 unsupported wireless network device detected. System halted. remove device a start

Hi:
Did you just install a wireless card?  You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
Paul

Similar Messages

  • Error 104 unsupporte​d network device!!!!​!!

    I've bought a new wireles mini pci network card.
    I put it in my laptpop and all i get is error 104 unsupported network card detected.
    Help!!!!!!

    Hi:
    if you did not purchase a supported wireless adapter that is listed in your notebook's service manual with the HP part number on it that is why you got the error.
    HP locks out of the BIOS any wireless cards that are not listed in the service manual.
    This method is how HP has chosen to comply with wireless communications regulations regarding SAR and interference. Cards and notebook antenna systems have to be tested and validated to work within certain measurements.
    More information regarding this can be found in this document below:
    While this specifically deals with US regulations, other countries also have similar regulations, I'm sure.
    Since HP is a US based company, it complies with US regs.
    http://fjallfoss.fcc.gov/kdb/GetAttachment.html?id​=22884
    There is nothing you can do except to remove the card.
    Paul

  • Itunes stopped working.  error message ADiAdID

    itunes stopped working.  error message ADiAdID

    Hello alanllc,
    The article linked below provides some useful steps that can help get iTunes working again.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Since updating to Mavericks, Mail doesn't work properly.  It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again.  Any suggestions?

    Try to force quit the mail app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

  • I'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected.  please tell me what to do to enable me to transfer the pics

    i'm trying to copy pics from my pc to Iphone4s and am getting an error message - cannot copy item - the device has either stopped responding or has been disconnected.  please tell me what to do to enable me to transfer the pics

    Are you syncing the photos using Itunes?
    When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
    Look here more detailed instructions
    http://support.apple.com/kb/HT4236

  • Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

    Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
    I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with  8 GB 1600 MHz DDR3
    I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
    The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
    Can anyone help as I have to get a document out tonight
    Many thanks in advance
    S

    Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
    You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

  • TS1368 I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

    I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT1926 Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

    Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

    This happened to me today as well post installing the latest version of itunes.   I did a search on google for the error and came across a recommendation to :
    Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
    If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
    Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
    Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
    Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
    Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
    Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
    A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

  • Error message pops up saying "Network Connection could not find a PPPoe Server.

    I am trying to update my wife's iBook, 2,1 for my mom to use.  It is running OS 10.6.8.  Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on.  It will drive my mom nuts and worry her.  Can anyone help me stop this from happening?
    Thanks,
    KC

    Hello kevinfromwauwatosa,
    Thanks for the question. The following article provides the most relevant information to your issue:
    Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
    http://support.apple.com/kb/TS1843
    For additional information see this resource:
    Mac OS X: Troubleshooting a PPPoE Internet Connection
    http://support.apple.com/kb/TS1871
    Thanks,
    Matt M.

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Error message keeps popping up "Network Connection could not find PPPoe Server"

    I am trying to update my wife's iBook, 2,1 for my mom to use.  It is running OS 10.6.8.  Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on.  It will drive my mom nuts and worry her.  Can anyone help me stop this from happening?
    Thanks,
    KC

        Help is right here, front and center caibadass. May I ask what's the reason for the mobile number change? Are you logged into My Verizon as the account owner to make such a change? If you can share the details then we can assist. Keep in mind that if the number is changed online then there is not a cost.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.

    I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.
    I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?

    I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin.  Then I started with a new download of iTunes before the problem was solved for me.
    It really ***** that Apple does not give any direct support for its own products.
    Good Luck

  • Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Error message says "an ipod has been detected but it could not be identified.  We've disconnected the ipod and reconnected it but it hasn't worked.

    error message says "an ipod has been detected but it could not be identified.  We've disconnected the ipod and reconnected it but it hasn't worked.

    If the iPod was originally formated to your computer, restart your computer.  If not - How to use your iPod to move your music to a new computer

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

Maybe you are looking for

  • Windows Blue Screen of Death

    I keep getting the Blue Screen of Death when I am booted in Bootcamp.  Everything appears to boot fine.   I can load applications, but then shortly after using the Windows partition the Blue Screen of Death appears.  I have a MacBook Pro with retina

  • Scrolling bug safari 7

    With the trackpad when i want to return back on the previously page (swap with too fingers), Safari stop responding with the trackpad moove. I can't srolle down for example Sorry for my english, i'm french. Regard, Rod

  • TC 3TB Model A1409 compatibility with OS X 10.9.4

    I have a TC 3TB model A1409.  I have 2 OS X 10.7.5 machines and 2 OS X 10.9.4 machines.  The 10.7.5 machines back up to the TC fine using Time Machine.  The OS X 10.9.4 have stopped working, wire or wirelessly.  All are on the same network.  What is

  • Cp8 Is it possible to initiate a different timeline to start playing once you click a button?

    A bit challenging to explain, but I'll give it a shot: If we take a rollover slidelet for example - It has its own "timeline" so you can basically display additional objects on screen separately from the main timeline. Is it possible to have the same

  • Sales Order Item

    Hi; My cliant is asking for sales order item copy facility. Can somebody tell me how it can be possible? Thanks in Advance! Anita