My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a fix for it.

Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

Windows update error code 8e5e0147 help!

I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

Please review this previous post:
Cannot install some Windows updates, error code 8e5e0147
Carey Frisch

Windows update error Code 80072EF3

Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

Hi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support

Getting Error while doing Control Panel - Windows Update Error code is 80070103

Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
Microsoft - Other hardware - WinUsb Device
Please provide your email ID to send the Error screen shot.

Hi!
Check the following link to see if it solves your problem:
http://support.microsoft.com/kb/952032
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

TS3694 Has anyone ever had an error code -1202? Cannot find any info on it, please help

Has anyone ever had an error code -1202? Cannot find any info on it, please help

Have you looked at the previous discussions on the right side of this page under the heading "More Like This"?

Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
I am always getting the Update error Code 80071AA7
I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
POQ 93 ends.
2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
do not match actual file [l:24{12}]"settings.ini" :
Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
= 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
After that i have checked "WindowsUpdate.log" file:
2015-03-18   22:12:23:584   1264   db0   Handler   WARNING: Got extended error: "POQ   Operation   HardLinkFile   OperationData
\SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
I am out of ideas.
Can some one please help me?
What can i do?
Thank you.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Windows update error code 80246002

I have 4 PCs running Windows 7 (both 64 and 32 bit) and found that after the last update on Wednesday morning, all 4 are now getting a code 80246002 when I did a check for updates today. I tried uninstalling the latest updates and this did not help. On 2
of the PCs, I did a restore to a week ago (when I know that there had been at least two successful checks for updates and this did not resolve the problem. I have seen a lot of posts implying that this is related to KB 2982791 and KB 2993651 but uninstalling
these didn’t resolve the issue.
Any suggestions on how to resolve this?
Mize Johnson

Hi,
If you receive Windows Update error 80246002 while checking for updates, it means that files required by Windows Update might be damaged. This often can be corrected by renaming the Windows Update download folder, and then running Windows Update again.
Try to run the following commands:
1. Type net stop wuauserv. Hit Enter.
2. Type: ren c:\windows\SoftwareDistribution softwaredistribution.old.
Hit Enter.
3. Type: net start wuauserv. Hit Enter.
4. Type: exit and hit Enter.
If it doesn't resolve the issue, run this "Fix It" tool below:
Troubleshoot problems with installing updates
http://windows.microsoft.com/en-in/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Karen Hu
TechNet Community Support

Windows update error code 80072EFD and 80244018

An error occured while checking for new updates from my laptop
WindowsUpdate_80072EFD" "WindowsUpdate_dt000
WindowsUpdate_80244018" "WindowsUpdate_dt000
Help me with this error. i try to solve by using Microsoft TechNet but still cannot solve the problem, Also i try all the link that appear still cannot solve. Help me please..

Hi,
Have you tried this link?
Windows Update error 80072efd
http://windows.microsoft.com/en-in/windows/windows-update-error-80072efd#1TC=windows-7
And for error 80244018, in addition to solutions mentioned in the first reply, you can also try this, in start button, type "services.msc", enter, locate "Background intelligent Transfer Services" and "Windows Update", stop these two services, then
clear C:\Windows\SoftwareDistribution folder, restart the two services.
Regards
Yolanda Zhu
TechNet Community Support

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Windows Update error code 8024402C

I've been having this problem for months and I can't make any updates so please solve my problem, I went to your website about that problem and it still doesn't solve my problem, I would really appreciate if you could solve it thank you in advance.
PS: I'm using window 7 64bit if that can help.

Hi,
About Windows Update error
8024402C, please refer this article from Microsoft:
http://windows.microsoft.com/en-US/windows7/Windows-Update-error-8024402C
If it doesn’t help, please temporally disable firewall and antivirus program and update again.
If the issue persists, you can try to reset Windows Update components for test:
http://support.microsoft.com/kb/971058
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Windows 8 fails to install EVERY update, error code 0x800f0922

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

I did that and it told me it succeeded, but I also tried to manually install net framework with DISM but gave me the same error.. And I reinstalled Windows trying the repair, refresh and reset options, nothing helped. I did not yet tried a clean installation.
CBS Log:
https://www.dropbox.com/s/qgzhhmlr0nqd7es/CBS.log
Windows Update Log:
https://www.dropbox.com/s/hpakr5t2290pbpy/WindowsUpdate.log
If the links dont work, try these:
CBS Log:
https://paste.ee/p/6aALS
Windows Update Log:
https://paste.ee/p/KzbIq

Windows update error code 80072F78

my window 8 on hp pavillion g6 originally window 7 changed to window 8 cannot update after sometime, it used to update but stop after awhile so i try to troubleshoot and fixed the problem but still yet it shows erro 80072F78 i dont know what to do please if anybody has a solution please help me.

Try this tutorial from thewindowsclub article on windows updates fail to install:
Steps:
PART 1:
DISABLE CRYTOGRAPHIC Service
( Right-click Computer > Manage > Services > Stop the “Cryptographic Service” and rename the “Catroot2″ folder situated in C:\Windows\System32\Catroot to something else like say Catroot2X.)
PART 2:
Rename C:\windows\system32\catroot2 to CATROOT2OLD or cATROOT2BACKUP
...basically it lets you rename after you stop the Crytographic service
restart crytographic service
PART 3: restart your pc (mine froze) During this process
full helpful tutorial at
http://www.thewindowsclub.com/windows-updates-fail-to-install
I also did run the System Update Readiness Tool. though it died midway and caused my pc to restart.

Windows Update Error Code 80070663 and 64C

I am running x64 Vista on an HP Pavillion dv9000 laptop.
I was cleaning up my desktop when I saw a Word doc I didn't recognize. I tried to open it and got a Windows Installer window saying "Preparing to Install". I have an activated, legal version of Microsoft Office 2007. This is the first time
I've seen that window pop up. I let it try to install whatever it's trying to install and it comes up with an error: "This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application
vendor to verify that this is a valid Windows Installer update package." I am the administrator on this computer. I have full access to all files.
This prompts me to start Windows Update to see if that will fix it. That's where the error codes come in. The windows updates: "Microsoft .NET Framework 3.5 Family Update (KB959209) x64" and "Security Update for Microsoft Visual C++ 2008 Service
Pack 1 Redistributable Package (KB2538243) yielded the error codes 80070663 and 64C.
I noticed when I press Start, the power button occasionally says "Installs Updates then Shuts Down". I didn't click it because I had work open I needed to work on later. Then when I left the computer and came back, the power button didn't have
the shield on it that said "Installs Updates then Shuts Down". I shut down my computer anyway and it didn't install any updates, and this is where I'm at. I've retried installing the updates via Windows Update and it still shows the original error
codes.
I've researched this error and came across Microsoft Fix It, downloaded as: "MicrosoftFixit.wu.LB.137269729445221149.2.1". I've run it and it did not solve the problem.
Please help,
Jake

Jake, did you ever find a solution to your problem? I'm afraid I can't help if you didn't, but I'm experiencing the same problem.
I also run Vista and had no problems until recently when I had an installation failure on 12th April 2014 for the same two updates:
Microsoft .NET Framework 3.5 Family Update (KB959209) x86 - (Installation status: Failed. Error details: Code 80070663)
Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) - (Installation status: Failed. Error details: Code 64C)
I don't know whether it's these updates that caused the problem or an earlier update that has stopped these updates been installed. The PC is generally working but Word & Excel don't load any more. I get a 'Preparing to install' popup follwed by
the message: 'This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.'
If you did find a solution or any one else knows of one then I'd be very grateful.
Dave.

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

Similar Messages

Maybe you are looking for