My PC crashed and it wont work even with the recovery disc

pavilion a1520e 
windows vista 32-bit  
it just stop working i order the recovery disk and still wont work 
parts#   5092-5959 vista home premium 71NAv3PcA3+
              5070-3830 vista home premium-base 
              5070-4193 CTO-Vista Business Supplemental 

alex103 wrote: pavilion a1520e  windows vista 32-bit   it just stop working i order the recovery disk and still wont work  parts#   5092-5959 vista home premium 71NAv3PcA3+   5070-3830 vista home premium-base    5070-4193 CTO-Vista Business Supplemental 
Hello alex103, You might try to boot the system and press the key to run the hardware diagnostic test and see if you can confirm a hardware failure.
My suspicion is the hard drive may have failed.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

  • Equium - Black screen and cant reboot with the recovery disc

    I have a black screen and cant reboot with the recovery disc but I seem to be getting nowhere.
    I find it strange I cant ask Toshiba direct about my problem but I have to wait for a kind hearted person to solve my problem or give me a helping hand

    Of course you can ask Toshiba. Toshiba has Authorized service providers worldwide and I hope some of them are in your country too.
    So please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download > Find an ASP and contact nearest service provider. Just explain the situation and I hope they will help you.
    Back to your problem:
    It is not easy to say why this happen. The whole issue is not described so well and I am missing some important points.
    Maybe you have upgraded RAM and now notebook doesnt start properly. It is also possible that CPU is defective. It can be so many different reasons for this.
    Best thing you can do is to contact service and ask for help. they can run diagnostic tools and find out quickly what the problem is.

  • My screen z1 crashed and does not work only touch the buttons below

    I had my phone in my back pocket and I was driving and when I get to my destination , I realized that the screen had crashed , , and now only the buttons below function , do not understand how they work only 3 buttons, the damage screen is on the inside, not the outside in help¡

    @zamora07
    Replacing the LCD it's quite simple, just requires a lot of work and the correct tools, keep in mind that doing so will void your warranty and your phone might not be waterproof after this. 
    this is how to replace the LCD
    video 
    https://www.youtube.com/watch?v=SvJKVxfKqFc
    step by step picture
    http://www.xperiablog.net/2013/09/15/xperia-z1-disassembly-guide/
    You will need to buy a new LCD/Digitizer
    http://www.ebay.com/itm/like/131214968274?lpid=82&chn=ps
    http://www.smartphonebay.net/LCD-Screen-for-Sony-Xperia-Z1-p/lcdp-syz1.htm?gclid=Cj0KEQjw-OCqBRDXmIW...
    https://www.strivemobile.com/sony-xperia-z-lcd-touch-screen-assembly-replacement?gclid=Cj0KEQjw-OCqB...
    and TWO double sided tape
    http://www.ebay.com/itm/like/331105420623?lpid=82&chn=ps
    one for the bacak pannel and another for the new LCD
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • AirPlay Mirroring doesn't work even with the specified hardware/software

    Hello,
    I have a late 2011 (OS X 10.7.5) MBP and a Sep  2012 Apple TV (MD199LL/A) with the updated software 5.1.
    AirPlay Mirror icon doesn't appear in the menu bar.
    No options/icons or texts related to AirPlay mirroring in System Preferences > Displays either. Checked detect displays, still no.
    Updated all the software in both the MBP and the Apple TV on Oct 6th 2012 late evening/night and restarted both a couple of times, still no signs of AirPlay Mirror icon or option.
    BTW, AirPlay works with iTunes, so I can hear music from MBP on my TV.
    AirPlay Mirroring works with the latest iPad (as of Sep 2012) as well.
    I think one or two people have reported this issue on the forum in response to some question/discussion. Thought it deserved starting a new topic in case some Apple folks are listening.
    Perhaps their adverstising or guidelines need an update to remove references of AirPlay mirroring working with 2011 or newer MBPs. Perhaps they meant 2012 or newer?

    pthompson63
    To be honest I use mine mainly near power and juice up when I can so I don't test the battery too heavily, so I haven't noticed but would probably not.
    If mirror is the only thing you want to do but don't want ML look at third party apps such as airparrot or reflectorapp (I hvae used airparrot and found it OK).
    Jules

  • Remote wont work, even with firewall off, help!

    Tried about everything I could find and it still doesnt work! Please help!

    I had the same problem. I tracked it down to bonjour was not running on my mac. Once I manually started it everything started to work. I think remote works off of bonjour so if it is turned off or disabled remote won't connect to your itunes. I used this article to turn it back on http://tech.karbassi.com/2007/11/06/leopard-turn-off-bonjour-mdnsresponder/

  • My wifi wont work anymore with the ios 7 update I have tried everything please help!!!

    I updated to the ios7 it worked great for about a day and now my wifi will not turn back on! I have tried everything please help I do work from my phone and I need it to function properly ! I cant update for the newest ios7 because I dont have wifi!

    As Apple has posted on their website since early June, only the 5th gen ipod touch can handle ios 7.
    Do you have a 5th gen ipod touch?

  • A version of 'Adobe Master Collection cs 3' usb to my computer's hard disk when a placed a certain sum of money in the installation will be suspended as it is to insert the message. What's the solution? C, d, usb, doesn't work even with the installation i

    Help me plz..ㅠㅠ

    If you can take another attempt at explaining your problem it might be possible to help you.  I am not able to interpret what you are trying to say in your title and it ends with an incomplete statement.

  • Dv6 1361sb with 64bit Windows 7 wont boot even with recovery CD

    Our HP dv61361sb with 64bit Windows 7 laptop died.  I can't get it to boot past the Windows 4 color flag...goes to a graduated blue screen and stops, or if I use the boot recovery discs I just ordered for it, it stops at a graduated grey screen and won't go any further if I force it to boot from the CD by hitting escape on boot..  I ran boot tests on the hard drive and memory, and all check out 100% OK.  Looked on HPs help site and it just says to insert the recovery disc and follow the on-screen instructions...can't get that far.  Any ideas?

    Do you have another hard drive that you can try?

  • Is my MBP broken forever? It won't charge or power on even with the battery unplugged

    Hello,
    My 2011 MacBook Pro has completely died.
    Around a month ago I set it down (carefully), it made a clicking noise and would not turn on. The charger light was still green but would not power back up. I unplugged the battery and it was working fine with the charger alone so I presume that the battery was the problem but did not buy a battery as I had no money/apple appointments are apparently like trying to find a needle in a haystack.
    Then I was using it, moved it slightly and it turned off again, would power up but only when the charger was plugged in without pressing the power button AND with the screen closed. It did this a few times and then will no longer charge or turn on. The charger shows no light. I do carry it around quite a lot for my job but it hasn't received any damage in the time it has been broken.
    this also happens after I had cleaned the MacBook down and installed Yosemite.
    Is it a write off or just the battery?

    Try a SMC reset:
    http://support.apple.com/en-us/HT201295
    If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
    Ciao.

  • My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

    ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

  • I have windows 7 and EasyLink wont work neither will 192.168.1.1

    I have windows 7 and EasyLink wont work. Now I tried the 192.168.1.1 and even that wont work! I have a WRT54GS and I know it works because when I usee the two laptops connected to it, it works perfectly except when too many users get on my wifi connection then it overloads

    I'd suggest trying a factory reset, that should clear any password that was set and forgotten, as well as any settings that are preventing you from talking to it (like the router address having been set to something other than 192.168.1.1).
    There's usually a recessed reset button on the back that is accessed via an "unrolled" paperclip.  Just press that button and count to about 30, and then wait until the router comes up again and try the 192.168.1.1 address.
    If you have a cable modem, then I'd suggest that you write down the MAC address of the primary computer that was used to configure the router, and then try changing the MAC address on the router to that when you get back in touch with it (via the 192.168.1.1 web GUI).  The factory reset may change the router back to it's original MAC address, which may prevent your cable modem from being happy.

  • Hi my firefox crashed and now wont restart, I cant past the crash reporter the crash report id is: bp-1a14605e-a13b-4ae6-b459-ca0792111124 thanks

    it suddenly crashed and now wont restart. A crash reporter keeps coming up but nothing happens

    I cant even get the internet on, (im currently on my boyfriends laptop) when I turn my desktop on it goes to the crash report but wont let me send it- it then just starts doing its own thing, i cant even log off i just have to turn it off, i cant click on any icons, it wont let me so i cant open firefox in safe mode....any clues?

  • Keyboard and mouse wont work unless booted in safe mode.

    So my keyboard and mouse wont work at all when i start up normally, so i coudnt even log on, then i tried safe mode and i was able to use the mouse and keyboard and log in, then when i loged in i got some messages:
    *+System extention cannot be used+*
    +The system extention "/system/library/extentions/IOUSBFamily.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the products vendor for an update.+
    And 2 others: MicrosoftMouse.kext and msdosfs.kext
    Im pretty sure how i got this problem, i was using bootcamp and i got this program called MacDrive (bad Idea)and it corrupted my HD or something so i had to use disk warrior to fix it. I also used disk utility in safe mode but there were no errors it said.
    and this is probably a hardware problem but i cant use DVD's anymore, my drive will only read CD's now, must be broken....
    so ya, i dunno what to do exept get my drive fixed and to a backup and reinstall OS...

    Hi
    There are no many options which could solve this problem.
    It can be a hardware problem or software related issue.
    Can you use the internal keyboard within the BIOS?
    Check this.
    If this would not be possible, I assume the hardware is faulty.
    Additionally I recommend testing the keyboard and touchpad using the factory settings.
    Recover the notebook and check if the keyboard would functions. Otherwise you will need an helps from an notebook technician in order to replace the keyboard and touchpad

  • My ical works ok except when I open the month of March 2013 it crashes/closes. All other month work, even into the future. How can I fix this?

    My ical on ipad 3 works fine except when I open the month of March 2013 it crashes/closes down immediately. All other months work, even into the future. Even Feb and April etc. in 2013. How can I fix?

    I understand it's a glitch. If you have any events on april 1 2012 i believe,t hat's an all day app, delete it or make it for just a period of time, not all day.
    I think it has something to do with daylight savings time (but don't quote me on that) with the conflict betwen 'all day' and the ipad trying to figure out how long 'all day' is with that whole spring forward and lose an hour. removing any 'all day' appointments seem to remove that conflict.

  • ITunes and Quicktime wont work

    did the usual upgrades and know iTunes and Quicktime wont work - They wont even launch. Im running 10.3.9 and cant upgrade to 10.4 do to the fact that my Pro tools system is not compatible w/10.4. the upgrade said it would run on 10.3.9 now im dead in te water. I tried to install the early version of both but it wont let me "because it knows I have a newer version on there" QT 7.0.3 and the iTunes upgrade- If uninstalling QT & iTunes & then reinstalling earlier version again will work HOW DO I UNINSTALL THEM ? IF IT WONT WHERE DO I GO FROM HERE.
    SOMEONE PLEASE HELP - I HAVE TO GET THIS SYSTEM UP AGAIN BY TOMMOROW.

    I will tell you how to do it but first promise that you will run Disk Repair (single user mode, install disk, or shift key held down at boot) and then repair permissions before trying to reinstall the packages.
    Also, download the combo installer for 10.3.9 and run it again.
    If none of the above works then you can go to Library/receipts/and the version of itunes and Quicktime that you want to install.
    Drag them to the desktop and try reinstalling the updaters for itunes and Quicktime. It should work.

Maybe you are looking for

  • Enhancement on fi/co to clear the line items...

    hello experts, i m workiing on Enhancements in fi/co...i m not able to get the actual exit.. How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item gen

  • What is a system memory "page out"?

    I heard that looking at "page outs" in activity montor (under system memory) is a good way to know if you need more ram. Can someone explain what a page out is? What % of page outs represent a problem?

  • Music on iphone 3GS

    My 3GS recently updated to OS5 but I have noticed that when I use the ipod function after an indeterminable time it shuts down for no reason. Bit of a pain when using it in the car!

  • Approval by 2 users

    Dear all, We have a problem with dis-approving/rejecting a sales order document by 2 users. We have set an Approval Stages with 2 users and an Approval Templates also with 2 users (orginator). When the stages-users, one of the user has approved then

  • Pages suddenly quitting

    Whenever I try to open a 50 page document I have spent a week writing, it quits, and will not let me open it. I can open other pages documents, just not the one I need. Any ideas how to solve this? Desperate.