My PC crashed by starting CANcard selftest in the last step for installation?

Hi,
I have tried to reinstall the CANcard and LabVIEW but my PC crashed by starting CANcard selftest which is actually the last step for installation?! Previously this CANcard worked on this PC but becuase by mistake two different LabVIEW versions have been installed, I reinstalled Win XP and now ...
I have already tried with LabVIEW7 and 6 plus CANcard driver 2.1 and 2.2 but that did not help.
Thanks for any hint.

what means crashed your PC? A blue screen came up or the MAX rashed?
The problem could be caused by 6.0, because the driver was installed by the LabVIEW Installer of this version.
This can cause problems with newer drivers, like CAN 2.x.
try to uninstall all LV versions and all NI drivers.
Then check with attached programm for NI components and uninstall the rest. Then remove the CAN board from your computer and start again.
Now install LV 7 and then the driver 2.2.
Then plug in the board and now it should work, if not contact the NI Support.
Attachments:
msiBlast.exe ‏232 KB

Similar Messages

How can I start Fireworks without openig the last Files

Hi,
I need to open Firewrks without opening the last File I'm working on.
The Problem is that the programm crashes by starting and automatically opening the last pictures.
Any idea?
Kind Regards

You could try the solution mentioned in the following forum thread:
http://forums.adobe.com/thread/1193088?tstart=0

Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it

When i connect my ipod touch to the computer and it brings up itunes, and it starts syncing, it just stays on the last step(6) and I can't download anything else to my ipod.

I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

My MacBook Pro 13in Mid-2010 won't start unless I hold the power button for about 10 seconds! Help Please!

Hello.
I have a MacBook Pro 13-inch (mid-2010):
Processor: 2.66GHz Intel Core 2 Duo
Memory: 4GB 1067 Mhz DDR3
Running Mac OS X 10.7.2
Yesterday I opened my computer (was sleeping as usual) and the screen just flasehed white and the computer powered off. The magnetic electricity thingy was connected and was green, so it was fully charged, and connected to the electricity.
Since it powered off, I tried turning it on again, and again, one second after starting to boot up, screen flashed white and the computer powered off.
I read somewhere I should hold down the power button longer, so I did, and it booted up. That's why I am able to write this. But every time I turn it off or put it to sleep, it does the same thing when I boot up.
If I don't hold the power button for 10 seconds or so, the computer won't work.
Then today, I did a backup of my entie hard drive, just in case. Later, I started using Excel, and about 1 hour after I was on it, suddenly it got really slow. Like I would click on a program like Safari, and it would take over 30-45 secs to start and be ready. And my computer is usually really fast!
I went on the Internet again, started in safe mode, boot up with option+command+P+R to reset PRAM, and nothing worked. Then suddenly on one turn-off/turn-on (since I can't restart because the computer only starts if I hold the power button for 10 seconds), again it is working at normal speed.
What can this be? Any ideas?
I really appreciate your time and help in advance
Gaby

GabyBA wrote:
I forgot to say I had already tried that as well. Just in case, I just tried it again and there was no change :S
Are you running the Apple-supplied RAM? Have you run Apple Hardware Test? I don't know what else you've tried, but this may be time to do a fresh install of Lion if you have not done so since installing Lion.

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
    for(int k = 0; k < symbols.length; k++){
        String symbol = symbols[k];
        if(s.equals(symbol))
            return k;
    }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

Pages wont load half the time have to close all the way and reopen always says conecting this really started to happen after the last 2 updates

pages wont load half the time have to close all the way and reopen always says connecting this really started to happen after the last 2 updates

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

My iphone will not connect to my wifi only just started to do this the last 2 days i have tryed resetting network settings sometimes my wifi will turn on other times it will not could u plz help ?

my iphone will not connect to my wifi only just started to do this the last 2 days sometimes the wifi turns on other time no often then not it will not turn on could u help ?

Settings > General > Reset > Reset Network Settings.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem is still not resolved, take the device to Apple for evaluation and possible replacement.
Verizon does not provide hardware support, taking the device to them would be a waste of time.

Adobe Premiere (CS6) crashes after start up - what could the problem be?

I open up a project I have been working on for about a year now. It does have a fair amount of footage within it, but I recently cleared out some unused (draft) sequences and some back up files/images.
Shortly after start up it crashes and displays this message:
I am on a bit of a deadline and am not sure what to do.
The other night it stopped crashing for the evening and I could use it fine. But today it is crashing again...
Appreciate any help in resolving this!
Melodie

Welcome to the forum!
My assumption is that you've meant to say WXGA which would reflect 1280x800...BTW, what's the 7-character code of your ThinkPad?
Lowering the brightness would be the first step IMO. The only LCDs that have never given me headaches were FlexViews, but Lenovo phased them out... There are also settings in Vista that should be able to help you make the colours less offensive for your eyesight...
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I have a Macbook air which has had to have the mother board replaced twice. It is starting to crash again a few months after the last disaster. It is out of warranty and I am out of luck. The computer freezes frequently. Any recommendations?

My Macbook air has had to have the mother board replaced twice. It is starting to malfunction again -- it frequently freezes when I am on the internet. The screen also pixelates when I go from one page to another. The warranty is expired. Any recommendations?

Hi angier,
How long has it been since the last logic board replacement? Was the previous repair(s) done by Apple directly or via an authorized service provider? If you're on MLB #3 and you're still seeing the same or very similar problems, I'd contact the place that did the service last, especially if it was in the past 90 days.
When you get a repair done through Apple, even if the machine is out of warranty, the service (and parts) carry a 90-day limited warranty. From my experience, Apple is often times flexible on this window as well especially if it's been a repeated repair.

For no apparent reason, my email will not autofill addresses. I have no problem on IE, Chrome or Opera. This problem just started with firefox within the last 24 hours. My mail server is AT&T/Yahoo, and I use webmail - not a mail program.

With all other browsers, when I compose an email, once I start to put the recipient's name in the To box, it will autofill the name if it is in my Contacts. This has been the case with firefox until the last 24 hours. Now, firefox does not automatically recognize any of my contacts. This problem is not happening on IE, Chrome, or Opera. I access my email through my AT&T/Yahoo account on the web, not through a mail program.

please try to uninstall the adobe flash plugin from the windows control panel. afterwards manually delete any leftover files in ''C:\Windows\SysWOW64\Macromed\Flash'' and download & install the plugin again (uncheck the option to install the bundled security software): www.adobe.com/go/getflashplayer

Windows wil not load..it goes to the restart screen for safe/normal mode/tries to start but returns to the same screen for safe /normal mode...Help

What has happened...when starting in bootcamp, windows does not load. It goes to the restart in safe/safe with networking/normal mode. When I choose any of these windows screen comes up and the lttle blue balls start to roll. then screen goes blank as if windows is to start but goes back to the resrat in safe/etcmode. Help...

Did you burn the DVD from ISO?
Did Windows get fully installed & updated? added Apple Boot Camp after?
If you still don't have 10.6, you won't have Boot Camp 3.x drivers (and later) for Windows 7.
How large a partition did you create?
How long if at all was it working normally?
The last update, install or change made was.....?

I think I have the last update for iPhoto, lately its been crashing and do not open. It doesn't give enough time to go on the " Help " section to find out what is goin on.

My iPhoto crashed after I was trying to upload some fotos. It never finished the upload and it frozed, then it crashed. Now every time I open it, it opens on some of the last pics i tryed to upload then it crashes. What can I do?

What system version are you running and what iPhoto version do you have? As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

How to start logic without loading the last session.

Every time I open logic it opens the last session. Is there a way to set it to ask me if I'd like to load a new session or a previous one when I start it up?

General preferences > Project Handling > select what you want.
Sounds like you currently have Open Most Recent Project selected.
Do Nothing might suit you better.

Adobe Premiere keeps crashing upon start up and in the middle of edits.

I have been through some technical assistance with your team. But it seems I've found more on the forums in relation
to my computer and what I need to make sure is up to date and yadda yadda.
I open my project and it will crash consistently, annoyingly. It seems to happen with an AVI file.
Here's the video specs
Here's my hardware.
I'm up to date on almost everything else. Any tips for me to keep this app running and actually functional?
Thanks,
Jeremy
(CC customer)

I have read through quite a bit of all of this info. I don't necessarily want to buy anything extra unless I absolutely have to.
It's a strange camera that's for sure, Emerson has no website or support online. I will see if I can find a disc or possibly
just plug the camera into this computer and see if it gives me the CODEC. What about GSPOT?
Is this specifically what's crashing my Premiere? I have yet to try anything without that AVI/MJPEG file yet. It seems that
it handles the 264 just fine, it's the silly MJPEG that's kicking my butt. I read that it may have been corrupted
somewhere along the way. If that's true do I need to just scrap the file?

My PC crashed by starting CANcard selftest in the last step for installation?

Similar Messages

Maybe you are looking for