My PC does not recognize ipad mini as a drive

When I connect my ipad mini to my PC with the provided USB, my PC does not recognize my ipad mini as a hard drive.  Under devices on my PC the ipad mini is identified as "Apple Mobile Device".  The driver on my PC is "Apple mobile device USB driver".  It states that it is working properly and there are no updates for the driver.  How can I have my PC recognize the ipad mini as a hard drive?

You can't. It cannot be used as a disk drive. It is accessible through iTunes, only.

Similar Messages

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • ITunes does not recognize iPad due to "unknown error OxE80000565."  Does this mean anything to anyone?

    iTunes does not recognize iPad  due to "Unknown error OxE80000565."  Does this mean anything to anyone?

    Hello pyloric
    For that specific issue, check out the article below for the steps to walk you through to get your iPad talking to iTunes again.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/TS3221
    Regards,
    -Norm G.

  • IMac G5 with OSX 10.5.8 does not recognize my Western Digital external drive containing the majority of my music library.  Is there any way to access that drive and recover the music stored there?

    I have an iMac G5 with OSX 10.5.8 that does not recognize my Western Digital external drive.  I had no problems with this until I upgraded to 10.5.  Most of my music library is stored on the external drive.  Is there any way to access it to recover the music?

    How is it connected?  Have you tried different port?  How about logging in as a different user then trying to mount the drive.

  • ITunes does not recognize ipad when connected

    When I connect my iPad to the computer, iTunes does not recognize the iPad.  I have had the iPad for several months now and have not had the issue.  I checked the cable with the charger and that works fine.  Went through what Apple suggested to no avail.  Any ideas?

    Did you try the steps contained in the attached link?  http://www.apple.com/support/ipad/assistant/itunes/

  • After upgrading to 7.1 iTunes does not recognize iPad device

    I upgraded iPad to system 7.1.  I got a message to connect to my iMac and iTunes by my USB cable, which I did.
    iTunes no longer recognizes the iPad wirelessly and does not recognize it even when attached byUSB cable.
    My iPhone (4.2.1) is recognized by cable.
    Any suggestions?
    Bryan Davis

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • Itunes does not recognize IPAD 3 after upgrading to IOS 6.

    After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3.  What can I do to fix this issue?

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • Itunes does not recognize IPAD

    I have a new IPAD2 and when I connect it to my Home PC Itunes does not recognize it. It is recognized on my work PC. How can I fix?

    There is troubleshooting help here http://support.apple.com/kb/TS1538

  • MacBook pro does not recognize my WD external hard drive anymore

    I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
    The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

    Does the WD drive show in Disk Utility?
    Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
    1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
    WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

  • My iMac does not recognize or see an external drive.

    Ref.: External USB M-DISC DVD+-RW CD RW Burner Writer Drive For Apple MacBook Air Pro iMac
    made by YunSen Tech.
    My iMac, Mac (27-inch, Late 2013), I bought in August 2014. Its SN is: C02MT0YWF8J4/OS X Yosemite. Version 10.10.1
    Could you please help me with the installation of the reference external drive. Supplier gives instruction for Windows only. When I follow the window instruction  on my iMac, the system does not recognize or see the drive. When I use Apple>About this Mac>System Reports>Hardware>USB, I think the following info describes the Drive, is it?:
    External:
      Product ID: 0x0840
      Vendor ID: 0x13fd  (Initio Corporation)
      Version: 1.14
      Serial Number: 313037383530384C31312020
      Speed: Up to 480 Mb/sec
      Manufacturer: Generic
      Location ID: 0x14500000 / 1
      Current Available (mA): 500
      Current Required (mA): 2
    I would greatly appreciate some help.
    Thank you in advance.

    The problem is NOT the fact that it is a USB 3.0 drive, as USB 3.0 is backwards compatible with USB 2.0. The problem is specific to Toshiba Canvio portable drives. They only work if you use a micro-USB2 cable instead of the included USB 3.0 cable. This problem does NOT affect other USB 3.0 portable drives (Seagate, Western Digital, etc.), and they work fine with USB 3.0 cables.
    Once again, you need a micro-USB2 cable for the Toshiba to mount.

  • OSX 10.3.9 does not recognize Memerex 2GB USB Travel Drive

    My USB and firewire card is operating properly and recognizes the USB printer and keyboard but does not regognize the USB flash memory drive.
    Do PC formatted flash memory drives not function with OSX 10.3.9?
    I was hoping to use the flash drive to do nothing more than move jpg files from Mac to PC.

    I have SanDisk USB 4 Gb flash and was going to use it for exactly the thing as you do and ran into same problem. However somewhere I read that the flash drive can be reformatted (I think MSDOS) so it will be recognized on both PC and Mac. But since the prices of the flash drives dropped so much I just ran down to Staples and got another identical SanDisk flash and now use one for my PC and one for my Mac.

  • IPhoto will not recognize iPad mini

    I have an iPad mini running iOS 6.1.3. I need to move pictures from that iPad to an iMac running OSx 10.9.1 and iPhoto 9.5.1. iPhoto on the iMac is not recognizing the iPad. iTunes does recognize it though. I have tried repairing permissions, as well as restarting both the iMac and the iPad. The iPad does have photo stream turned on as well as shared photo streams. I can not turn these options off or I will lose all my picture. Is there another way to get the photos off of the iPad? or Is there another way that I can get iPhoto to recognize the iPad?

    Hello RedHots,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Verify that there is a photo available to be imported:Save a screenshot by pressing the Home button and the Sleep/Wake button at the same time (the screen should flash briefly). Manually open your photo-management software to determine if this software can recognize the device and import photos.
    Try using the photo-management software built in to your computer's operating system:
    Mac OS X: Open Image Capture (located in the Applications folder).
    Check for software updates to your photo-management software.
    Verify that iTunes and your iOS software are up to date. Download and install any updates that are available.
    Check for and install any available operating system updates. (On Mac OS X, select Software Update from the Apple Menu. On a PC, run the Windows Update application.)
    Try using a different computer to import your photos.
    Email photos to yourself if you wish to keep them. Then, delete them from your device and reconnect the device to your computer.
    Note: If you have a large number of these photos on your device, you may delete them from your device a few at a time and reconnect to the computer until the device is recognized.
    Best of luck,
    Mario

  • PC does not recognize ipad; itunes does not recognize ipad

    Using itunes 10.2.1, iOS 4.3.1.  Cannot get itunes to recognize ipad.  Have reinstalled itunes many times.  Have gone into DFU on ipad many times.  Have played with usbaapl many times.  Out of ideas to fix.  Ready to frisbee ipad into street below.

    Hello I had a similar experience and searched and searched the forums until I came across this fix, I manually updated the apples drivers manually myself rather than letting windows find them,for me this worked. I tried everything in the book and I mean everything, as soon as I updated my itunes program to the newest version and tried to plug in my iphone my computer would not recognize my device nor would it show up in itunes, I don't know if this will help anyone else or if I have posted this in the right place but it worked for me, I did not have to disable any of my spyware or uninstall itunes just followed the instructions in the link below and pretso it worked, so far so good it is early days and I am yet to try my ipad 2 using this way so hopefully it will work I had the same problem with both devices on my computer after the new update...mine all came down to the drivers on my windows xp and the new update from itunes hope this helps someone else as well.
    http://support.apple.com/kb/ts1538
    I also followed a very old thread (sorry I can not find this thread anymore) from a few years ago that helped ....THANK YOU TO THE PERSON WHO POSTED IT YEARS AGO IN SOME FORUM
    I went to device manager and found my iphone in a heading under others generally it show up in the heading under usb controller if installed correctly (why it showed up here in the first place I have no idea, it was also showing iphone with a yellow question mark I then highlighted the iphone then clicked up the top of the screen to update drivers
    Welcome to hardware wizard pops up I clicked no not this time then next
    I choose to install from a specific location I then clicked on browse to find the file C:\ Program Files\Common Files\Apple\ Mobile Device Support Drivers then clicked next I waited 30 seconds before plugging my iphone back into my usb and presto  my phone showed up in itunes and on the computer by manually updating the drivers myself..Good Luck I really hope this helps someone else and if it does could we please pass the fix along as this drove me nuts for days....

  • Windows does not recognize ipod mini but charges it

    can somebody please help me!!!!! im not very sabby with computers so its been hard for me. Ive put music on my brothers new secondhand ipod mini 2nd generation but my new(new to me) 2nd hand laptop wont recognize my ipod on windows and itunes. But it charges it. I can still put music on my brothers ipod but not mine. Ive been going through **** tryin it on my own & now im asking for help. Theres not very good help in support on the apple website and im downright frustrated. please someone halt my grief
    dell inspiron 1150   Windows XP   laptop

    Remain calm, everything is going to be okay.
    Check out these links:
    iPod Does Not Appear in My Computer
    iPod Appears in Windows but not in iTunes
    Post back with results and I hope this helps!

  • 64 bit iTunes 11.0.1.12 on Windows 7 Ultimate does not recognize iPad. What to do?

    After upgrade of iTunes to 11.0.1.12 (64bit) on Windows 7 Ultimate, iTunes claims it cannot connect
    my iPad Mini. It recommends me to uninstall iTunes and upgrade to the 64bit version - which is the
    one I installed in the first place. Reconnect, restart, reinstall does not help. I've checked for WinSock
    conflicys and there are none indicated.
    Any clues anyone?
    Thanks/ShaunSheep

    I've never had issues with iTunes and Windows 7 64bit on my desktop, laptop or my partner's laptop.
    Since you've failed to mention what the issue is (e.g. what happens when trying to play "anything"), my initial reaction is the problem is merely user related.

Maybe you are looking for

  • PO Approval

    I try to explain my scanario as good as I can. Purchase orders will be used for 3 different form / Documents. I am creating 3 forms. Each of the 3 documents has different Approval procedures. For Example: I use PO for Documenta called A and B and C (

  • Adding a down state to the spry menubar

    Does anyone know of a easy way to add a down/click state to the menu items? I'm not too much of a javascript expert so from what I can tell it seems like I am limited to the current functionality of the script. Any suggestions?

  • SPC Chart Display

    Hi honored experts, I am trying to set up some demo SPC charts for a customer with no success... What I did so far: 1. I defined a DC group with two parameters. 2. I entered a few figures for those parameters for some PSNs using the standard POD. 3.

  • Fullscreen Flash Air: Remove Dock and Topbar/menu

    Hey, How do i remove the topbar/menu and the dock when i'm making a fullscreen air-application in flash? I know that it's something like "NativeWindowType.LIGHTWEIGHT" - but i don't know how to use it. Sincerly, Mads Viktor.

  • S067- Credit Exposure for customer- Unable to find the source

    Hi Experts, For a customer, we could see a credit exposure of X amount in FD33 and S067 shows a open delivery credit value shows the same X amount. The issue is i am not seeing any open delivery or sales order for that customer. i am Unable to find t