My PC does not return to the source document I print from

I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>

Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support

Similar Messages

My Mini Ipad Does not return to the Home screen after I press the Home button

My Mini Ipad Does not return to the Home screen after I press the Home button. I have also tried to turn it off and it is not responding.

Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund

Iphone 5 Does not return to the Home screen after you press the Home button, Iphone 5 Does not return to the Home screen after you press the Home button

Does not return to the Home screen after you press the Home button

The buttons do wear out, and when they do you'd need to get the phone serviced.

Bridge CC does not come to the front, when opening file from explorer

Hi everybody! Please let me now if there is way to solve the following problem:
When Adobe Bridge CC is opened in the back and I surf through files in Windows Explorer, after I double-click the file I want to view, Bridge does not come to the front, like normal image viewers do, it opens the file normally, but unfortunately for me it stays in the back. And I want it to show up every time I open an Image!
Thank you in advance!
Win7, 64bit, Adobe CC

Any App in Windows opened in the background has the ability to show up every time it is called... Except Bridge for some reason...
If I double-click MP3 file - Windows Media Player shows up, even if it running in the back
If I double-click a text file - Notepad shows up, even if it running in the back
But if I double-click an image file - Bridge just stays in the back

My ipod does not appear in the source pane

I must have done a big mistake as I have got a windows computer at home but plugged my ipod on my mac computer at work. From that day my ipod got empty. I thought going home and plugging it bac in my laptop the problem would it be fixed, but hasn't worked. I have tried any step available from thesupport site. Install and unistall everything about 100 times. The message that keeps appearing when I plug my ipod nano on my computer is: "ITUNES NO PUEDE LEER EL CONTENIDO DEL "IPOD DE XXX". HAGA CLICK EN RESTAURAR PARA RESTAURAR LOS AJUSTES DE FÁBRICA DEL IPOD", which it means I should restore to the factory setting, but once I tried to do it, on one of the steps takes from granteed that my Ipod appears on the soure pane of ITUNES, which it does not ever happen. I have found my Ipod file on the windows system and followed all the steps on that issue, but there has not been any kind of result. I have tried the menu in my ipod to restore it from itself but does not work..well, I have tried anything available from the advices from apple(have spent more than 4 hours on it) but can't get my ITUNES to recognice anything. By the way, I have aslo uninstalled my IPOD and with the CDroom, tryied to installed the whole thing again,..but nothinggg. GOt I tunes version 7. Any advice will be very helpful as I cannot stand going to work on the bus for an hour without my music...and Cannot afford another IPOD at the mo..
Thanks in advanced.

I have a very similar problem but I have done the 5 Rs and more---multiple times--and my iPOD and iTunes are just stuck in an endless cycle of Restore and Restart but rather than showing up in the source panel so I can put my music back on, the icon appears and tells me to restore again. I did everything including checking my USB ports etc. in My Computer and my iPOD refuses to get out of this cycle when iTUNES does bother to recognize it. Any suggestions other than the 5 Rs---because they are doing absolutely nothing.

Browser REFRESH button does not return to the same iView/Page

Hi,
In SDN site I have seen that in whichever menu i am in, if i use the browser refresh button i return to the same page. But this does not happen on my enterprise portal.
Can you please let me know, how to set / configure the enterprise portal EP7 such that, if am in any iview and use the browser refresh, then i am returned to the same iview / page and not to the first page of the menu. Currently in my portal, when i hit the browser REFRESH button, it takes me to the first page/iview.
Thanks,
Anirban

Dear Romano,
Thanks for your reply. With the help of the document link that you have provided, i have been able to achieve my target partially. Currently i am able to refer to the iView and Role directly using the QuickLink and when i access that particular iView & Role using the QuickLink and then do a refresh, the same screen appears. This part is working fine. But i have one issue.
But generally a iView/Role is accessed not via the QuickLink on the browser but by clicking on the Role on Navigation Level 1. Even though this Role has a QuickLink, it is not visible in the address bar since the QuickLink URL was not used for reaching the Role. In such a situation, when we press the REFRESH button, the iView / Role is vanished and the browser returns to the first default page of the portal.
Can we somehow make it such that whenever the Role is accessed in the Navigation Levels, it can be accessed via QuickLinks and the QuickLink URL is displayed on the address bar ? If this can be achieved, then i guess the problem will be solved.
I hope i have been able to get across my point. Hoping to hear a positive reply from your side.
Thanks in advance.
Regards,
Anirban Kundu.

My camera does not appear in the source list on 9.2.3

after updating my camera software, my camera no longer appears in the source list on iphoto '11. I am running version 9.2.3 of iphoto on a MacBook (OS X 10.6.8). I'm not sure how to revert to the previous verson befor the update. Any ideas?

Since you do not tell us any information about the actual problem except that it does not work a couple of things to try are generally the problem - make sure the camera is set to mass storage mode - that is what iPhoto expencts - and once you get your photos safely off the card (image capture maybe or if it moiunts to the desktop the finder) use the camera to reformat it
LN

Small Bug : People detection - O key does not return to the grid view

Windows 7
When I hit the O key, I go into the face detection module.
But when I hit th O key again, I do not come back into the grid view.
To do so, I have to click on this icon to return to the grid view.

Grid View is always G key

I work a long list. Each line has a link that I click on to work. I then click submit. It does not return to the last line worked. Goes to the begining.

I go to the Insurance Auto Auction website to access a list of vehicles up for auction. When using "explorer" I can follow the link and set a bid value then click submit. It will return me to the last position on one the list. Firefox will sometimes doe this too but more often than not it brings me back to the top of the list. When I am looking at 300 units this becomes very frustrating.

Try opening each link in a new Tab, and when you're done with each Tab, close it. The "list" page will be sitting exactly where you left it, ''unless that page did an automatic refresh to add newer information while you were viewing a different tab.''
Middle-click a link
or use { Ctrl + click }
or right-click and use Open Link in New Tab

HT201412 Does not return to the Home screen after pressing the Home button

My home button it's not works after pressing If I press it hard many time it's work but sometime not working at all. Can any apple store fixed this problem in any apple store at any country cause I purchased from apple stroe in Brighton and I live in Kuwait .. So please help me with this problem
thank you for listen

Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund

How do I align text under a tab so that it does NOT return to the left margin when typing a paragraph?

I am trying to type up presentation notes. I want a partial outline-format. Outline mode doesn't work for me because it won't conform to all I need it to do, I can make it work as a regular document; however, my big GLITCH is tabing for a new "bullet paragraph" and not being able to get all the text to align under that tab. Anyone know the answer to this problem?

Ok, I ran into another problem......all was working fine until I tried to add bullet C. Now, I cannot type and align the paragraph for C correctly. When I align the paragraph, it keeps trying to pull the letter C with it. I want the letter C on one level of indent and the paragraph aligned on the next level. Any suggestions?
Example:
I.     aligned paragraph
     A. aligned paragraph
          aligned paragraph
     B. aligned paragraph
     C. this paragraph will not align.......it wraps back under the C and if I try to highligt just the paragraph part and indent it, the C goes with the paragraph........
Hope this makes sense......appreaciate your help. I am kinda under a deadline to get this document completed. Thanks

Workflow does not start on a event: document copied in from another library's workflow.

I'm using SharePoint Online for Office 365.
I have a workflow that initiates as soon as a new item is added to a folder. That workflow gets approval from a group of people. Then copies the document to a new folder and deletes the original.
I have another workflow set to initiate as soon as a new document is created or changed that gets approval from a second set of users and moves the document again.
Problem: Both workflows work great on their own. The problem i'm having is the second workflow doesn't initiate when the document is moved. There's apparently no way to trigger a workflow from within a workflow. Is there a way to edit the data in the current
item after it's moved to trigger the second workflow?
Also, I tried to nest the second workflow within the first but it didn't link the document to the second workflow.
Any help is appreciated.

From what I'm told, this is purposeful. It's to protect the user from firing a million workflows on accident. I believe you can run an impersonation step (requires 2010 workflow) on the document moving part and it will then successfully fire.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

MiniTOC does not appear in translated source file

RoboHelp 8.0.2
WebHelp Output
I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
I have no clue how to resolve this issue. Sample code and screens are listed below.
Donna
English Source
<h1><a name="Top"></a>Working with Web Ordering</h1>
<p>This topic explains how to generate and maintain NAPA and Factory orders.
(Special orders and Non NAPA orders will be available in a future release).
You perform these tasks on the <span style="font-weight: bold;">Order
Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
> Web Ordering</span> from TAMS II BackOffice.</p>
<p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
</span><span>topic</span> for instructions on common functionality such
as sorting data.</p>
<?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
<p> </p>
<h2>Adding a New Order</h2>
<p>Follow these instructions to create a new purchase order:</p>
French Source
h1><a name="Top"></a>Utiliser le module de commande en ligne</h1>
<p>Cette rubrique explique comment créer et gérer des commandes NAPA et
d'envoi direct. (Les commandes spéciales seront disponibles dans une version
future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;">Gestion
des commandes</span>. Cette rubrique suppose que l'utilisateur est connecté
et que la <span style="font-weight: bold;">Gestion des commandes</span>
a été lancée à partir de la page de renvoi de TAMS II. </p>
<p>Voir : La rubrique <span style="font-weight: bold;">Survol de l'interface
Web de TAMS II</span> pour des instructions sur les fonctions courantes
comme le tri des données.</p>
<h2>Ajouter une nouvelle commande</h2>
<p>Suivre les instructions ci-dessous pour créer un nouveau bon de commande :</p>

The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

FM HRTRV_IF_GET_TRIP does not return USERDATA

Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
    employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
    tripnumber                 = lv_tripno
*   LANGUAGE                   = SY-LANGU
*   CALCULATE_AMOUNTS          = 'X'
*   GET_TRIP_FROM_MEMORY       = ' '
IMPORTING
*   FRAMEDATA                  =
*   STATUS                     =
    USERDATA                   = ls_user " should contain cluster values, but it doesn't
tables
*   RECEIPTS                   =
*   ADDINFO                    =
*   GUESTS                     =
*   TEXT                       =
*   MILEAGE                    =
*   STOPOVER                   =
*   DEDUCTIONS                 =
*   COSTDIST_TRIP              =
*   COSTDIST_STOP              =
*   COSTDIST_RECE              =
*   COSTDIST_MILE              =
*   AMOUNTS                    =
*   ADVANCES                   =
    return                     = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
     t_perio-abrec = '1'.
    clear te-key-pdvrs.
    import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukas

good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata..

IWEB previous does not return to previous page

I am trying to get back to the last page with the Previous option in the Link setup. I do not know why it does not return to the previous page but some other pages.

The following script is courtesy of Cyclosaurus. Use it in an HTML snippet:
<button type='button' target='_parent' onclick='javascript:history.back();' > Previous Page </button>
OT

My PC does not return to the source document I print from

Similar Messages

Maybe you are looking for