My Pc Doesn't Even Boot With Fx5200 Helppp
HY guys, first of all sorry about my english. I'm spanish…
i've purchased a FX 5200 x8 agp
and when I first plug it the PC doesn't even boot…
No beep no light… nothing…
Here goes my mainboard model and config if it can help…
P4VMM3 mainboard has the VIA VT8751 (P4M266) Northbridge and VT8233 Southbridge chipsets.
This mainboard is a P4 423 socket so i cant upgrade just because there are no mainboards with this socket on the market
And now at the webpage of the makers (ECS), there is no upgrade for the bios it seems they've retired it…
i'm really pissed with all of this…
somo of you guys does have the same problem like me?
Does i have to eat my VGA CARD?
thank you in advande for the help
Horzoguay,
What about your power supply? It might not be up to delivering the 75W the GeforceFX Needs.
Also before loading the GeForceFX Card, go in your BIOS and set the AGP to 2X, then go into Windows and load the latest VIA 4in1 Drivers. Then try the GeForceFX again.
Take Care,
Richard
Similar Messages
-
Can't even boot with 4gb, 975x Plat PowerUP, XP Pro 3d bit
Hey all, I've had a Core 2 Duo e6600 running on a 975x Platinum PowerUP edition since august now with 2 GB of memory. I recently added an additional 2GB.
I understand that I may never actually see all 4gb of memory in Windows as I only have Windows XP Pro 32 bit, but it my OS won't even boot with the other 2 sticks in there (4gb). I get a BSOD on the loading screen. The BIOS detects all 4gb correctly. I have tried the /PAE switch and /noexecute=optin swith and neither work. I've even tried disabling PAE and putting /noexecute=alwaysoff in there and I still can't boot (you'd think that I'd be able to at least get it to boot with 3.25 or whatever GB showing up, right?). I have the current official 7.40 BIOS. Does anyone have any advice for me?
Summary: 4GB recognized by bios, Win XP Pro 32 bit won't boot BOTH with or without /PAE and /noexecute=optin(or AlwaysOff).
Conroe E6600 and 975x Plat PUP bios v 7.40
THANKS!Run memtest with all 4 dimms installed - Since it's valueram there's a chanse those sticks are not identical. They just use the cheapest chips they can find at the time to produce valueram, so even if you buy valueram from the same make and type, but at a diffirent time, they might still use diffirent chips ...
Non-identical RAM can cause errors in a dual channel enviroment (wich your core2 is)...
Core2 64 bit performance is where it should be. Just as fast as 32 bit for normal applications and loads faster for applications wich put the extra cpu registers to use... -
The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!
The camera doesn't work on my iPhone 5s. It doesn't even work with camera apps. Please help!
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414 -
Booting with new aluminium keyboard
Hi,
I got the new aluminium keyboard yesterday - seems to be fine but:
While booting there were no keys recognized at all. Neither CMD-V for verbous booting messages nor ALT for selecting either MacOS or BootCamp/Windoze...
Is there still a firmware update pending?
I'm using a Intel MacMini with MacOS 10.4.10, the latest keyboard update and all other published patches and updates...
Any hints?Hi Doug, Hi Paul,
@Doug:
It seems to me that the new keyboard is simply not recognized by the bootloader/EFI/<whatever>. The girl from AppleCare asked me to check wether booting from the installation DVD works (i.e. booting with the "c"-key pressed) - it doesn't. Booting with CMD-s into single user mode doesn't work either.
So maybe you're right concerning the "standard feature", but if there's no keyboard connected there are no features - and "not connected" and "not recognized" seems to be the same here...
The only other Mac I have probably access to is my old G4-Mini which I've sold to a friend of mine. Besides that there's a different bootloader for PowerPC I don't expect an older Mac to recognize this brand new keyboard better. OTOH my old keyboard (a Macally iKeySlim) still works on my Intel-Mini so I see no reason for distrust here.
@Paul:
Nice to know that it's not soley my problem
If I understand you right you're saying that on your iMac the keyboard is working correctly - even during boot. Is that right? So you are able to get the boot messages on the iMac when booting with CMD-v pressed (with the new aluminum keyboard of course)?
It would be fine to narrow down the problem a bit to be able to make a meaningful bugreport for the guys @Apple...
Thank you both so far!
Matthew
Message was edited by: kestrel9532 -
ZH77A-G43 Will only boot with 2 sticks
Trying to build a linux backup server, but cannot get to even boot with 2 sticks.
System powers up, fans spin. After about 10 seconds power-cycles and then continues
to repeat in a loop.
Have read through various similar posts.
So far have tested all sticks test fine when tested individually with memtest86
Have removed, inspected CPU and mobo for bent pins; none visible to the naked eye.
Is there anything I am missing to try and resolve this issue?
------Build is below ---------
MSI ZH77A-G43 LGA 1155
CORSAIR CX600M 600W
ZALMAN CNPS9500A-LED 92mm
ASUS Black SATA DVD-ROM Drive Model ...
Seagate Barracuda STBD2000101 2TB 7200 RPM
Seagate Barracuda STBD2000101 2TB 7200 RPM
Seagate Barracuda ST2000DM001 2TB 7200 RPM
G.SKILL Ripjaws X Series 32GB (4 x 8GB)
Crucial M4 CT128M4SSD2 2.5" 128GB
Intel Core i5-3570K Ivy Bridge 3.4GHzOk I can get it to go as far as 2 sticks; not in the expected slots either. Board identifies these as slot 1 and 2.
In OC genie it shows two. The sticks are labeled CL 9 9 9 24.
The memory page shows the following timings:
Cycle 1.5ns
tcl 13.125ns
tRCD 13.125ns
tRP 13.125ns
tRAS 36ns
tRFC 260ns
tWR 15ns
tWTR 7.5ns
tRRD 6.0ns
tRTP 7.5ns
tFAW 30.0ns
tRC 49.125ns
What exactly am I looking to adjust here (or am I looking in the wrong place)? -
Ok, I got an ATI 3470. Brand new. Installed it in both a M57 and an M58p and it would have no display nor even boot with the card in the slot. If I removed the card, they booted fine. I looked at the bios settings and no changes helped even thought the on-board graphics should be disables\d when the card was in. Its an Hewlett Packard branded card...but a 3470 is a 3470, you know. Hard to believe its a bad card. I dont want to get another card if there is a common problem with the machines. Both of them have been flashed with the latest bios.
It's a Be-Quite 630W L8. I also tried a Corsair 850w just to confirm all was ok with the same results.
I have also tried a reference 7970 which works fine. I also tried the Matrix 7970 in a different board and it worked fine at 3.0 16x so as you said it does seem to be a compatibility issue between the Matrix and G45 Gaming board.
With the latest Beta bios the Pc boots into windows as I get the startup sounds from the speakers but no display on any of the cards ports ? If I plug the card into the 3.0 8x slot all works perfect as it does if I set the PEG 0 to 2.0 16x ?
It's a bit weird....
Hopefully a future bios will fix the issue and for now I'm just running the card at 2.0 16x. -
Lenovo Thinkpad T520 doesn't boot with GPT slices on FreeBSD 9-BETA3 - BIOS bug?
Hi!
I've bought a brand new Lenovo Thinkpad T520 laptop and decided to install FreeBSD 9 Beta 3 following this guide.
But when I rebooted the system, it simply doesn't boot (turns out to the BIOS boot menu).
It's even doesn't boot with default FreeBSD 9 UFS-on-GPT installation scheme through bsdInstaller
Changing BIOS (latest, 1.31) settings BIOS Startup->UEFI/Legacy Boot from "Both" to "Legacy only" has no effect. As FreeBSD AFAIK doesn't support UEFI boot, legacy boot should work picking up and starting pmbr (protected MBR record), but it doesn't.
However, FreeBSD 9 UFS-on-MBR installation (with mbr boot record and FreeBSD slice in MBR partition instead of GPT) works fine.
It seems to me that UEFI/Legacy Boot "Legacy" setting actually has no effect if 0xEE type Primary partition entry is present on disk.
First of all, has anyone installed Linux or FreeBSD with GPT partitioning scheme on latest Thinkpads?
And the second one, as I've saw similar problem on FreeBSD forum thread about T420s laptop I believe that this may be a bug in the BIOS. How can I fill the bugreport or send an e-mail to support or developers, as, obvious, phone support can consult only about Windows OS.Volker1 wrote:
I've got a suspicion that the Thinkpad bios/efi is not simply executing the first stage bootloader, but looking around on the GPT disk and then crapping its pants when it doesn't find Windows.
Right now I have a MBR-formatted harddisk in the ultrabay with the bootloader in the MBR. Once I get the bootloader off the MBR disk, I can easily continue to boot from my GPT-formatted SSD.
Yes, it seems that it's a BIOS bug at least on T520, T420s and W520 laptops. Even in "Legacy" mode first stage bootloader doesn't execute if partition type is 0xEE (GPT).
Hope Lenovo developers will fix it. They fixed something on BIOS 1.31
[Problem fixes]
- Fixed an issue where the computer might not be booted from bootloader program.
but it doesn't work for now. Pity. -
I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
I need to keep Snow Leopard so that I can run some old softward.If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
CCC can clone Lion Recovery - great for moving or backup. -
I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it
Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.
- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store. -
My iPhone 4S will not play music out loud. I can't turn sound up or down, it doesn't even give me the option. I think that it thinks its docked, I've tried to blow air in it, I've tried compressed air with no luck.
Clean iPhone charging port with clean dry toothbrush. See if fixed. If not, and if there is Warranty or AppleCare make Genius reservation and take to Apple for resolution. If no coverage, clean again, very well with toothbrush and small amount of Isopropyl Alcohol.
-
I am having issues with my computer recognizing my phone when attached. I am trying to transfer pictures to my computer but it doesn't even see the phone.
skinaked101,
Look no further help is here! I can understand the importance of being able to keep your pictures safe on your computer.
Have you tried using different USB ports on your computer, as your fellow community member suggested?
Visit http://www.verizonwireless.com/support/knowledge-base-97259/ for complete steps to transfer the pictures from your phone to computer.
JohnB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Why is my ipod saying 'iPod disabled, connect to itunes' when i try connecting it to itunes, it comes up with this pop up saying it couldn't take my ipod because theres a passcode on it?, why should i connect it when it doesn't even take it!!!
Follow ALL the Steps in this article > http://support.apple.com/kb/HT1808
You may have to try it more than once... -
My ipad has stopped updating apps. It doesn't even ask for password, it just oges to the apps screen showing empty progress bars. I've re-synced account and restarted but with no luck. Other than deleting the apps is there anyway around this?
OK. I will work backwards.
You certainly don't want to have to delete apps every time that they need an update, for any number of reasons. Losing data first and foremost would be a drag, but the overall hassle would be absurd. All things being equal, you should be able to update apps in the future after you delete them and reinstall them. I delete and reinstall apps all the time and I am also able to update them when updates are available for the apps. I just wanted to know if you had any success in any fashion installing apps.
Resyncing/refreshing the Apple ID/iTunes account wouldn't seem to be the issue either if you can download apps or other content from the iStores. Your ID is being accepted.
That leaves us with I'm not sure what. But I think I would try this trick fix and see if it helps.
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again. -
Refind-efi 0.8.1-1 doesn't boot with custom refind.conf
Recently upgraded to refind-efi 0.8.1-1 and manually ran refind-install.
I usually have the option ¨default_selection "bzImage,vmlinuz"¨ enabled in refind.conf but after some trial and error I found refind wont load the default boot entry with this enabled any more.
I moved
/boot/refind_linux.conf
and
/boot/efi/EFI/refind/refind.conf
and performed a ¨clean¨ refind-install.
If I select the default boot entry, with ¨default_selection "bzImage,vmlinuz"¨ enabled, refind shows the normal boot screen with standard options, but doesn't load the kernel. If I press F2 and select the boot with minimal options (in this case the same as standard options) the kernel boots instantly as expected.
If I use the standard refind.conf-file w/o ¨default_selection "bzImage,vmlinuz"¨ the default boot-entry with standard options works fine.
Anybody able to reproduce?\hbar wrote:Strange... A rEFInd bug perhaps?
I suspect so, but would like to see it reproduced before I file a bug towards rEFInd.
\hbar wrote:When you select the arch entry, is the line that specifies the kernel and its version the same whether the default_selection is set or not?
Yep, the commandline options "ro root=UUID=836e34d6-bc33-4044-a337-372a3d240f49 quiet" plus initrd are the same in the "Booting OS"-screen, whether I select the default "Logo"-entry, or specify which options to boot with via F2.
\hbar wrote:What if you set 'default_selection arch'?
Don't think that's supported, and it doesn't work .
I've also tried "bzImage", "vmlinuz", and "vmlinuz-linux" seperately with the same result.
Should I file a bug now or wait until somebody experiences the same problem?
Maybe you are looking for
-
i was using the previous version of firefox and it worked fine, the new version firefox 5 came up to down load so i did this and now when i press the firefox icon all that comes on screen is a blank firefox window....purple surround with blank window
-
Downloading music from Amazon straight to Itunes
So when I download music from Amazon straight into ITunes and the song appears in ITunes and plays in there but will not synch to my IPod becuase it says that the file cannot be found...I am just screwed?
-
Output error in Query for Weekly report
Hello friens, I want to create a report in which the user want the output of data as foloow net amount---- week1 week2 week3............. and so on. pack1 pack2 pack3 Now there are 52 weeks in a year, and in system the data is stored since 2003 till
-
Does anyone knows how to install Iplanet Messaging Express under iWS 6.0
Does anyone knows how to install Sun One Messaging Express in iWS 6.0? I have a server which has been installed with iWS 6.0 and another server which installed Iplanet Messaging Server 5.2. anyone can help me on this?
-
I am trying to build a Hyper-V cluster with VMM 2012 R2 but require some advice as it is not working how I want it too. I have 2 Hyper-V servers, both with their own local storage and 1 iSCSI disk shared between them. I am trying to cluster the serve