My Pc doesn't wake up from standby (845PE Max2)

Hi,
I have Windows Xp Pro installed and when I stand by my computer I can't get it to wake up successfuly. The PC is powered up when I press the power button, but I don't get any video signal or USB power (both my keyboard and mouse are connected to USB ports, and they don't get power after waking up).
Any clue on this? What should I do to make it work?
And could it have something to do with installed software? Besides the drivers for the hardware on the end of this message, I have Norton Internet Security 2003 (antivirus + firewall), Nero ImageDrive and Daemon Tools (these are tools similar to VirtualCD, thus making new cd/dvd drives available on my system).
Best regards,
Norberto Henriques
hardware:
Intel Pentium 4 2.4B C1
MSI 845PE Max2 FIR / 1x512 Mb DDR333 Kingston
HDD 2x WD 80 Gb 800JB/ WD 120Gb 1200BB
MSI GeForce Ti4200 G4Ti4200-VTP 128Mb
DVD Toshiba SD-M1712 / CDRW TEAC W540E
Creative Sound Blaster Audigy 2
Pinnacle Studio DC10+

Hi,
I own a Chieftec full tower black case that came with a 360W power supply from Chieftec (with PFC). I know this isn't a "top of the line" power supply, but I think it is enough to handle my system.
Besides the power issue, what could influence this? I know that my PC handled well the standby feature, but this was before I made some changes (moved a CD burner to the Intel IDE bus and placed a hard drive on the Promise controller, replacing the CD burner).
Best regards,
Norberto Henriques

Similar Messages

Satellite Pro A300 PSAJ1E doesn't wake up from standby correctly

I have a new Toshiba Satellite Pro A300/ PSAJ1E - 018006EN with similar problems too.
When mine goes into sleep mode it will not re-start unless the power button is pressed 'numerous' times, eventually it powers up, but in safe mode and everything that was being worked on is lost.

I too have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I'm finding a similar problem.
Sometimes, (not always: may be it depends on which program is running) when trying to put the computer in stand-by or in hibernate mode, it doesn't stop, but only suts down the monitor (panel), while the fan goes on running and the power light is green.
Then there is no other way of resuming than shutting down the computer by holding down the power button long time... but this is not correct!
NB: my computer is always connected to a lan, and generally there are some browser windows open when I put it in stand-by mode.
How can I fix this?
jomurray

T400 bluetooth doesn't turn on after wake-up from standby mode

Hello
Please help
My T400 doesn't turn on bluetooth after wake-up from standby mode
i need to enable it every time by hand.
Thing thing appeared after migration to Windows 7. Before, i used WinXp and that worked fine.
I setup all recommended software via SystemUpdate

On T400s this happend, if you try Linux to install and after that you install Windows 7. I have test Ubuntu (boot from LiveCD) and after that i had exactly sam eproblem. Solution was to reset BIOS to default values.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

Satellite A300-1NO - Wakes up from standby mode

Hi all!
I have got a Satellite A300-1NO with Win XP pro.
The problem is, that the laptop wakes up from standby mode automatically after about 5 minutes.
I tried to unplug all cables (LAN, usb, etc) but the power plug, but it's the same result.
So what can cause this? What should I try?
thanks.

You should disable the Wake up on LAN function in BIOS and Windows.
Check the BIOS for this option!
You can disable this feature in Windows if you right click on the network card > properties > advanced > wake on LAN
I hope it works for you.

Satellite L850-13R wakes up from standby with no reason

My L850 wakes up from standby every 10-20 minutes and after some time goes to standby again.
All power options are set as they should be (that means no wake on battery and even no wake up on power).
Problem is that this is my business notebook and I moves around with me so I could expect HD errors, not to mention battery life (I found it with dead battery this morning).
I have the latest firmware available (1.60)...
Anybody else facing this problem ?

In case anybody has similar problems one of the solutions could be:
IN registry look for
HKLM\System\CurrentControlSet\Control\CrashControl \DumpFilters
where you'll find a list of drivers that can possibly prevent standby (dumpfve.sys seems to always be there so don't touch it).
For other drivers remove the programs that installed them (I had MfeEpeHb.sys) or
do something not recommended and remove the lines with drivers you're suspecting prevent successful hibernation).
Eg. modify DumpFilters from
[DumpFilters]
MfeEpeHb.sys
dumpfve.sys
to:
[DumpFilters]
dumpfve.sys
That did the trick for me.
Hibernation tested and works without any problem

Mac Mini wakes up from standby automatically

Hi,
My Mac Mini wakes up from standby automatically. Waking up via network is disabled and I use an Airport Extreme, a USB mouse (not from Apple) and a wireless Apple keyboard. OS X version is 10.5.8.
I have the Mac Mini since about 10 months now. Almost 1 month after I bought it, I had the this problem but thought I am doing something wrong or my wife has forgotten to turn it off
After a while it was OK. About 3 months later it startet waking up by itself again. I called Apple Care (although the 3 months support was over). They tried to help, but there was no progress. It waked up again and again. After about 1 month it was OK again without me having done anything, no installations, no system updates.
One week ago, the Mac found some updates at Apple and installed them. Since then I have again the problem! I contacted again Apple Care and again they could not help. They just want me to pay for an extension of the Apple Care package, although they could not help me in this case!
Now I want to try it myself getting support by people in this forum. I hope there is someone with experience about this case.
I am not much experienced with OS X, but I will try to answer questions that could help me resolve this problem.
BTW, I searched for a similar topic and found one ("My MacMini always wakes up from standby") but in that case the wake up feature is activated by the user. In my case this feature is deactivated, as mentioned above.
Thanks
Cheers
Quartz84

Hi,
sorry for the delay, but I was on a business trip.
@Bsteely: Sometimes it wakes up immediately because of loosing connection to the keaboard when I send it to sleep. I suppose at the beginning of the sleep mode it into sleep mode, the keaboard connection is closed, then the keyboard "thinks" there is a problem and sends a message to the mini and the mini just wakes up again showing that the connection to the keyboard was lost but established again! This even happened as I had unselected the checkbox "Allow Bluetooth devices to wake up this computer" in Preferences -> Bluetooth -> Advanced.
But there are also times when the mini does not wake up so quickly. It just wakes up after hours. I had a look at Console.app as you suggested. Very weird to me indeed Well there I found something like "Wake reason = OHC2" or "Wake reason = OHC1". Unfortunately I cannot find older logs there.
@Boece: Hi and thanks for helping!
Well, I will try the update as soon as I can. By now I have no external harddisk to first save my data before doing the big update. But I am going to buy one soon.
Well turning off the monitor is OK, but the harddisk can wake up anytime while the mini is turned on as the OS might need to do something from time to time. And I don't want my computer to consume electricity even if it is such a small one like the mini. I'm a kind of green dude (but not from Mars ). And the sleep mode is interesting for me as I have very often many different Internet sites and some applications running, so I don't need to close them before turning off and open all of them again when turning on the mini.
Regarding other IR devices: The only IR device now is the keyboard. I even took out the batteries and the mini still woke up over the night!
Thanks again for your support guys. Please let me know if you have any further information of ideas.
Cheers
Quartz84

Mac Mini late 2012 with Mavericks don't wake up from standby mode

My Mac minin used to run with OS X ML 24/7 without any problem. After Update to Mavericks the Mac won't recover from standby mode. I have to power off the mac.
I cleared nvram, pram, installed Mavericks second time.
What can I do? Return to Mountain Lion?

I gave Mavericks a second try. It failed. Made clean install ofe mavericks, setup user manually, reinstalled my most needed applications. The mac mini will not wake up from standby mode (blanc screen -> must reboot/hard reset; spinning beachball -> hard reset)
I reset nvram and pram.
Any advice? any chance to get informations by apple?
rgds

Wont wake up from standby

I've had this problem for sometime now, where it simply wont wake up from standby when it have slept for more than ≈3 hours, and I have to do a force shutdown.
Programs opened when going in standby: Google Chrome, iTunes, Skype, Dropbox, Hamachi, Google Notifier and iChat
I believe this happend after I installed World of Warcraft patch 4.3 (havn't installed anything else in the past months)

bump

MacBook Pro doesn't wake up from sleep mode

My MacBook Pro (late 2011) with OS Mavericks doesn't wake up from sleep mode anymore. Battery is fully charged and the cable is plugged in. I can still hear the ventilator running, but that's all. I never had any problems, but since about 2 weeks this problem occurs. It usually then woke up after 10-15min, but now nothing happened since 4 hours.
Is there anyone who could possible help me? Unfortunately there is no Apple Store in my area where I could go to.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

IPhone 4 doesn't wake up from the Sleep Mode

iPhone 4 32Gb doesn't wake up from the sleep mode. When the iPhone goes into the sleep mode, I can't wake it up with the 'Power' button, neither with the 'Home' button. The phone is working, I even can hear the sound of 'unblock' slider if u touch and slide the screen at the place where the 'unblock' slider suppose to be, but the screen remains black. I have to push the 'Home' or 'Power' buttons MAAAANY TIMES to make the screen appear finally. Sometimes I need to push it 30 or 40 times!!! Or I just have to reboot the phone to make it work. But right after it goes into the sleep mode, I can't wake it again But when the phone is connected to iTunes, the sleep mode is working good (one push on the button and the phone is awaken). I tried to upgrade to 5.01 but nothing have changed. Also I've tried to synchronize the phone as 'New', but no luck again, the problem is still on the case. What I have to do? Do someone have the same problem? In Russia we have no official Apple Stores and my iPhone 4 is from Malaysia. So I can't just go to the Apple office and replace the phone. What can I do?

No, I don't have a case only a protective membrane on the screen... and I've tried to reset the iPhone by holding the 'Power' and 'Home' buttons with no result. After this reset the phone is working normally sometimes for about ten minutes (wakes up after one push), but then it's all repeats. And I repeat, that if I connect the iPhone to the PC with the USB-cable, the sleep mode is working fine, just like it should (I can wake the phone with one button push).

A70 wont wake up from Standby

Laptop will not wake up from standby. When i click on contol panel and power options It tells me to open Toshiba Power management utility settings...BUT tabs are more limited under that icon.
I end up holding power button until machine powers off then power it up again....not good!!!
Please help. Thanks

Which A70? What is the part number? Which country?
Which Windows?
-Jerry

Doesn´t wake up from sleep mode

Hi mac users,
my MacPro doesn´t wake up from sleep mode with a key press after new installation of OS 10.8.1.
Can anyone help me?
Thanks

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

After 10.9.3 update monitor doesn't wake up from sleep

I have an LCD connected to the Mac Mini via a mini-DP to DVI adapter and a video projector is connected directly at the HDMI.
The LCD is the "main" screen while the projector is only switched on for watching TV or movies.
My "Computer sleep" is set to "never" and "display sleep" to 15min.
All was working well until I updated to 10.9.3 ...
Now, when the LCD goes to sleep (projector is powered off) it doesn't wake up any more.
The computer is running and it is responding to my key-presses etc. but the monitor remains in a coma.
Powering the monitor off and on again resolves the issue, e.g. the display shows correctly.
This is however only a temporary fix as it refuses to wake up upon the next sleep...
The monitor itself is fine, it works on other systems flawlessly, e.g. on an older Mini.
Any ideas?
I have already force-fed it with the combo-udate but that didn't help.

My iphone 3GS does the same thing, not only does it suddenly fail to wake up from sleep. It just crashes and I have to do a hard reset. Today it just turned off when the ipod was playing I was a mile away from it and it was in airplane mode as well. I have restored from backup once and would dearly love to have it downgraded but that doesn't seem to be much of an option. My phone ran like a dream before the upgrade....now I hate to say it but its completely unreliable.
With so many people experiencing the same problem it makes me wonder why there isn't a fix.

Wake Up From Standby

I just added a MS wireless keyboard. Is there a way to wake up the Portege from standby from this keyboard? Now I have to open the lid and use the power button on the notepad. Before, I had settings that put the notepad in standby when I closed the lid. I changed that setting to do nothing when close the lid.
The notepad is set to go to standby after 15 minutes of non-use. This works fine but when I want to use it again I can't find a way to wake it up without opening the lid and using the power button.

I have read your posting 5 times now and I believe I have understand what you wrote but I am asking myself how you want to work on your Portege if you do not want to open the lid????:|
> …I can't find a way to wake it up without opening the lid…
You want to use notebook with closed lid or what? Do you use external display?

Pavillion 15 n000sp doesn't wake up from sleep in Windows 10

Since updating from Windows 8.1 to 10, my notebook has lost the ability to wake up from sleep mode.
When I leave it idle but open, the scren goes off but any touch on the keyboard or mouse wakes it up.
If I close the notebook, it goes into a deep sleep mode and unable to wake up. The usb powers off (optical mouse stops working) and pressing the keyboard, touchpad or power button does nothing. If I disconnect and reconnect the usb cable, I regain power to the mouse, but don't gain any functionality. Only way to recover from this is a hard reset by long power button press. I have already followed the instructions at http://support.hp.com/us-en/document/c03383935#AbT0 (basically assuring that peripherals have the ability to wake up the device - not only the keyboard, as stated in the article, but also mouse and touchpad - and checking for updates both through the windows update as the HP support Assistant and going through all devices in the device manager). I have updated both graphical card drivers (Intel HD and NVidia Gforce) and the update assistant doesn't detect any more updates. Still, the issue persists. Any help?

same issue for my system HP Pavilion 15-n235tx Notebook PC

My Pc doesn't wake up from standby (845PE Max2)

Similar Messages

Maybe you are looking for