My Pc photostream has not been Updating, but is working grand on my devices.

This is an ongoing or long term problem which I noticed last Spring (2014)  I had originally blamed the problem on my Laptop, incorrectly it seems as two weeks ago I bought a new tower Pc and its exactly the same on it.
Basically the Photostream is not functioning as it should. It works perfectly between my IOS devices and the shared folders back up to the PC just not the photostream. This is incredibly annoying as I have to manually back up all photos before I can clear out the devices camera rolls. Back in the spring I upgraded my IPhone and only realised this was an Issue when I lost a lot of the Older photos Having wiped the previous IPhone believing it was all still backing up to the PC. I noticed on the communities here a lot of other PC users were having similar issues, Is it a known Problem? Will Apple be fixing it?

Hi Celticdragonstudios,
Welcome to the Apple Support Communities!
In this situation I would recommend reading over the attached My PhotoStream FAQ, specifically the Does using My Photo Stream substitute for using iCloud Backup or iTunes to back up my photos? and How do I delete photos from My Photo Stream? sections. 
My Photo Stream FAQ - Apple Support
Have a great day,
Joe

Similar Messages

  • Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

    Updated  to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

    This is being caused by using the same Apple ID for iMessage.  To fix this you have two choices:
    On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
    On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

  • I have just had a large set of updates to my CC Apps, why have InDesign CC, Illustrator CC, Photoshop CC, Dreamweaver CC and Muse CC NOT been updated but a new version has been installed (2014)?

    I have just had a large set of updates to my CC Apps, why have InDesign CC, Illustrator CC, Photoshop CC, Dreamweaver CC and Muse CC NOT been updated but a new version has been installed (2014)?

    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
    -This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
    -so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
    If you are sure you don't need the old CC programs
    -http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  • HT201317 My Photo Stream is on my Windows 7 PC has not been updated

    My Photo Stream is updating regularly from my iPhone 4 to my iPad, but My Photo Stream on my Windows 7 PC has not been updated for the last four months. Any suggestions?

    Hi dDub_DW,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with Photo Stream on your PC:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/ts3989
    Cheers,
    - Judy

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT5457 my iphone 4 has not been updated since purchase almost a year ago.it does not have the software update option in settings. how do i get to update? settings. How do I update it

    My iphone 4 has not been updated since I purchased it a year ago. When I go to settings to click software update as per instructions, the software update is not listed. How & where do I go  to update my phone?
    Thanks

    You'll have to use iTunes on your computer to get your iPhone to the latest version of iOS. From there you'll be able to update directly from the iPhone for future releases.
    http://support.apple.com/kb/HT4972
    Regards.

  • Aperture has not been updated to support new higher-resolution Facebook images

    In August facebook changed the maximum dimensions of a photo from 720x720 to 960x960 (http://blog.facebook.com/blog.php?post=10150262684247131). Much like the last time they upped the resolution of photos on Facebook, Aperture didn't get updated to accomodate this change for months. As I understand this isn't some long gradual rollout -- all FB users can now use 960x960 images, and seeing as this is probably like one line of code to change, I'm just wondering if we'll be waiting months and months again to take advantage of this. In the meantime there's little reason to create FB albums through Aperture since you're forced to use lower resolution images.
    Anyone know how to perhaps modify Aperture to make this change while we wait for a proper update?

    Totally understand your first point. Some photographers want to protect their work. Thing is, some don't. It's just a hobby for me and I know I won't be making any money on it. People like me just want to put up the best version of a picture FB will allow us to. Perhaps Aperture should allow the user to CHOOSE the resolution of the image that gets uploaded.
    Facebook has, for the past while (long before the 960x960 change in August) allowed users to "download" the image, typically at a much higher resolution than what is displayed. The difference is that up until August, images viewed on facebook only displayed at 700x700. Now that's been upped to 960x960.
    Upon some re-testing I do have to eat my own foot. I just created a new FB album through Aperture and they are showing up as 960's instead of 700's. However all my older albums still show the images at 700x700 (something FB said would change automatically, since they technically already have much larger versions of these photos to resample to 960x960). It seems you have to force an update by editing the image so it gets reuploaded.
    So in conclusion, foot has been inserted into mouth.... though it'd be nice if I could simply "re-sync" my older albums to have them display at 960 without having to fool aperture into reuploading the whole thing....

  • Routine has not been updating the Payment terms feild?

    Hello,
    eg: For the feild "Payment terms" the value "V032" is not updating in to BW,Because the have applied the routine in 2 satge .1 is in Transfer structure and update rules.Please find the below routines
    routine is in Transfer structure
    clear RESULT.
      SELECT  /bic/zxsapbp into RESULT
             up to 1 rows
             FROM  /BIC/PZXSAPFLD
             WHERE  /BIC/ZXSAPFLD  = 'ZTERM' (BW) Payment terms
             and    /BIC/ZLOGSYS   = 'IMACS'
             and    /BIC/ZXSAPYB   = TRAN_STRUCTURE-ZZZTERM (R/3) payment terms
                AND ( objvers = 'A'  AND changed = ' '
                OR    objvers = 'M'  AND changed = 'I' ).
      endselect.
    routine is in update rules
    result value of the routine
      clear RESULT.
      SELECT  /bic/zxsapbp into RESULT
             up to 1 rows
             FROM  /BIC/PZXSAPFLD
             WHERE  /BIC/ZXSAPFLD  = 'ZTERM' (BW) payment terms
             and    /BIC/ZLOGSYS   = 'IMACS'
             and    /BIC/ZXSAPYB   = COMM_STRUCTURE-PURCH_ORG (R/3)
                AND ( objvers = 'A'  AND changed = ' '
                OR    objvers = 'M'  AND changed = 'I' ).
    Payment term value :V032
    Purchase org :         A001
    please can any tell that what is the problem in routine ?the payment terms are blank in bw?

    Your feed is not currently valid
    http://feedvalidator.org/check.cgi?url=http%3A%2F%2Fwww.fhbc.org%2Fclientimages% 2F38210%2Fmediacenter%2Ffhbc_sermons.xml+
    You will need to fix the issues shown at the link above.
    Once you fix the issues and your feed validates it should then update in iTunes store.
    Regards,
    Rob W
    podCast411

  • My iphone 3GS has just been updated, but now my computer wont recognise it, it just says 'apple mobile device USB driver'

    this means that my iphone cant be updated so i might loose all of my information on it!?
    how do i get my computer to recognise it again?

    I keep getting this too.
    I love how nobody ever replies solutions. It's ******* me off.

  • Out-of-date package not been updated in almost a year

    The question I have is: what should I do when I see a package that has not been updated in almost a year (after its flag-out-of-date)? I can't seem to find any info on how such a situation is handled. I can't reflag and sending an email to the maintainer seems intrusive and/or rude. There may be an underlying reason to not upgrade, or the flag was lost in time and forgotten.
    The package I have in mind is opencl-headers. It got stuck on v1.1, and never updated to v1.2, and now still not to v2.0. There is an AUR package for the 1.2 headers, but that just seems silly to have around.
    Thanks for any input!

    I see, there is a backstory to all this. It seems though momentum was lost when ocl-icd devs did not respond to the email requesting info. The last commit to their repo was for 2.0 support, back in 2013. It seems abandoned since then, maybe a new spark of activity will come when a new OpenCL spec comes out.
    The current situation is quite terrible really: libcl in the repos is from the NVIDIA package, so this means a hard dependency on a vendor not willing to follow the latest version of the spec. Way back when it was probably a sane choice, but now, as the email linnked by Allan shows, the situation is different.
    Either choice, be it ocl-icd or Khronos, will improve the situation (OpenCL version and license-wise). Currently ocl-icd has one advantage (detailed in the POCL developer docs): choosing the icd at runtime.
    As any CUDA or AMDAPP or Intel OpenCL package will include their libOpenCL, and it can be selected by LD_LIBRARY_PATH if required, I hope a sane libOpenCL package will soon make it into the repo.
    As for backward compatibility: I believe the headers are backwards compatible, and it is up to the applications to verify the device they want to use supports the functionality they use. As for forward compatibility: if one solution fails and an alternative is better: just replace the package providing the ICD library by a better one.
    Note that both the OpenCL headers and the ICD (libOpenCL) are designed to be platform-agnostic and should in principle work with all versions of the spec and devices, limited only by the device capabilities as reported through OpenCL functions. Currently, libcl and the old opencl-headers version is the limiting factor, which is Terrible®, given the (open source) alternatives.

  • JCOP Tools "This package has not been built"

    Hello,
    I'm using the Eclipse with JCOP Tools 3.1.1 and sometimes the .cap file is not built and the upload of the Applet fails when running the project
    cm> upload ".../workspace.1j.../myapp.cap"
    jcshell: Cannot read </../../myapp.cap>: java.util.zip.ZipException: error in opening zip fileThe "CAP File Properties" view in Eclipse says "This package has not been built" but I don't know how to force the build of the package. I tried to clean, manually/automatically build the project but it just won't get build :(
    Any ideas ?
    Thanks.
    Tex

    well nevermind, when this happens I just build the .cap alone:
    cd myproject/bin
    ..../java_card_kit-2_2_1/bin/converter -out CAP -applet 0x01:0x02:0x03:0x04:0x05:0x2E:0x61:0x70:0x70 com.test.MyApplet com.test 0x01:0x02:0x03:0x04:0x05 1.0 Tex

  • All of a sudden I cannot save events to my calendar.  It says a calendar has not been set.  Any ideas?

    All of a suddent I cannot save events to my calendar on my iPhone 4.  It says a calendar has not been set but my calendar is checked.

    Have you tried to Enable and Disable Restrictions? Go to Settings > General > Restrictions.

  • I have tried to update the software on my ipad 2, 16GB,  through itunes, but the update has not been completed and has frozen, what should I do?

    I have tried to update the software on my ipad 2, 16GB,  through itunes, but the update has not been completed and has frozen, what should I do?

    Hey there alaili55,
    Welcome to Apple Support Communities.
    It sounds like you ran into an issue updating your iPad 2 with iTunes on your computer. Take a look at the article linked below and try the troubleshooting tips that it provides, which will resolve most issues updating iOS devices.
    Resolve iOS update and restore errors in iTunes - Apple Support
    Cheers,
    -Jason

  • I update my credit card but the paymaent has not been debiteded yet

    I update my credit card but the paymaent has not been debiteded yet, what do I need to do?

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • I've updated my billing details but my membership has not been renewed. Why?

    I've updated my billing details but my membership has not been renewed. Why?

    The below order is complete & active.
    Creative Cloud Student and Teacher edition (one-year)
    Desktop Subscription
    23-Mar-2015
    I hope this is what you were looking for.
    Regards
    Rajshree

Maybe you are looking for

  • My phone is in recovery mode and doesn't turn on, what do I do?

    I tried to back it up to my computer because I didn't have anymore iCloud storage space.  It was supposed to upgrade but then went on upgrade mode and only thing I can do to get it off this mode is to connect it to iTunes and restore the phone to its

  • Currency conversion in Import Duties

    Dear All, I have created Import PO , duty calculation is correct in PO. For same Custom bill passing done (MIRO). IR values are calculated correctly. While doing the GR the values are coming in ERU it should be in INR. Exchange rate is maintained in

  • Elements 6 and iPhoto

    I am trying to open a file(photo) in Elements 6 straight from iPhoto. Every time I try to access an event it hangs up, when I go look in a folder and select an image they disapear, again I have to force quit to get out. Is there an issue between iPho

  • Which object in hierarchy should add event listener?

    Hello all, I'm quite new to the whole OOP thing, and one of the things I keep wondering about is this: Which class should listen for events if the choice is between a contained class or a containing class? For example: An instance of Game holds an in

  • Yosemite won't download from app store

    When i click on download/upgrade to Yosemite in App store nothing happens. Installer does not pop up or anything. I have tried looking in Finder -> Applications for the install as others have eluded to but nothing. Also tried looking in purchases in