My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

i use professional studio monitors to monitor the audio
the issue , is if i turn up the audio it will clip on premieres main output. so i cant turn it up any more.
the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects maybe there is a hidden master output that im unaware of

Similar Messages

MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=115320.0

Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
Check Volume from mixer settings, cable connections, Volume on your speakers.
I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

Want to connect an older Amplifier to AEX. Input data is 200mV for the amp. When I connect sound level is very low. What is output on AEX?

Want to connect an older amplifier to AEX. Input (AUX)data is 200mV. The soundlevel is very low. What is output from AEX? Phono input is 2,5mV and gives too high soundlevel as well as a strange sound(Isuppose some preamp is there)
Anyone to give some good ideas?

The analog output of the AirPort Express is approximately the same as a CD player. It is definitely compatible with a millivolt input. Don't use a phono input.
Make sure the master volume in iTunes is at its maximum setting. Remote speakers can have their own volume setting in iTunes, so check that also:
Try another audio cable.

HT1849 hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can you help me to fix the problem ?

hello i downloaded an album on my iPad yesterday but the sound volume is very low. Can someone help me to fix the problem ?

Hello Kishore1022,
It sounds like you have a new album downloaded and the tracks all have a very low volume. I recommend checking to see if Sound Check is enabled in the Music settings.
iPad User Guide
http://help.apple.com/ipad/7/#/iPad99f37037
Go to Settings > Music to set options for Music, including:
Sound Check (to normalize the volume level of your audio content)
You can also try downloading the purchases onto a computer, with either of these articles depending on your version of the operating system:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Or
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Thank you for using Apple Support Communities.
Cheers,
Sterling
Thank you for using Apple Support Communities.
All the best,
Sterling

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter

used wrong charger with ipod classic, now it wont turn on, displays the low battery icon even though its connected to the wright adapter.
Can anyone help ?
please?

WHow long have you left it to charge? Have you tried resetting it after a short period of time to see if that can help jumpstart the charging process? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

My ipod touch recently cracked the screen is not very broken, I'm from Brazil and bought my ipod touch in Miami want to know where I can fix it there in the united states

my ipod touch recently cracked the screen is not very broken, I'm from Brazil and bought my ipod touch in Miami want to know where I can fix it there in the united states? And how much it would cost?

Apple will not take it as a trade-in for an upgrade to an iPad touch
The will take it for recycle only
Your best bet is to sell it on your own and then use those funds to get the new iPod.
Allan

TS4079 i know this sounds weird but i went to Cleveland from florida and when i returned Siri has an australian accent. any ideas?

i know this sounds weird but i went to Cleveland from florida and when i returned Siri has an australian accent. any ideas?

Well you can't use it. The iOS 7 Activation Lock is pretty secure and you can't bypass it.

I only get sound from the computer's speakers even though I put in headphones

I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

Good day!
Thank you for writing to the Dell Community Forum.
Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
Have a great day ahead.

6233 model - Phone sound (during Calls) very low

Hi,
the sound I hear during calls is very low despite I have set tones and key pad sounds to the maximum.
Whereas the same in loud speaker mode or hands free mode is very good.
Plz help me
Model 6233

Check if you could put in to factory setting, if it would help.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

Why would audio input level go very low?

I'm sure I've done something dumb but I can't work out what it is. I'm recording with a mic into my laptop and the sound is really quiet.
I've used this set-up loads of times without this problem: Audition CC, Rode shotgun videomic into MacBook Pro.
Anyone know why the volume would now be so low please?

ben.bland wrote:
In Audio Midi Setup the levels are greyed out, and in any case set high, at "Value = 0.917" and "dB = 10".
We can rule this one out straight away - MIDI (Musical Instrument Digital Interface) has nothing whatsoever to do with this!
Likewise, in Preferences > Sound the input level is near the top.
I think that you need to find out what the input socket thinks it's doing here. What Bob is suggesting is that if it's a dual-purpose socket (ie it doubles up as either a line, or a mic, input), it's stuck on Line. And that's no good for a mic - far too insensitive. We're both a bit stuck at this point though, because it's a Mac you've got, and neither of us uses those...

Losing sound on the right channel or sound level is extremely low

This started happening when I got my 5. speaker system ( Logitech Z-5500 ) sometimes I would lose all sound from the right channel ( both front and rear and sometimes including center ) and sometimes the volume is at an extremely low level even if the sound card output is at 00% now fixing this is either a reboot or a change of audio mode Game to Ent ( vice versa ) Is creative working on a permanent fix for this one ? Im using X-Fi Extreme Music and Windows 7 64bit 8GB of ram

This started happening when I got my 5. speaker system ( Logitech Z-5500 ) sometimes I would lose all sound from the right channel ( both front and rear and sometimes including center ) and sometimes the volume is at an extremely low level even if the sound card output is at 00% now fixing this is either a reboot or a change of audio mode Game to Ent ( vice versa ) Is creative working on a permanent fix for this one ? Im using X-Fi Extreme Music and Windows 7 64bit 8GB of ram

Linux FF34 - How to set sound levels to a lower default?

The FEBE firefox extension plays a beep sound when it's backing up. My backup is at midnight on a Sunday and the PC is in another room, but the noise when it beeps nearly lifts the roof offo fo my house. Likewise, there are many sites where the site set the sound volume to a default Full Volume such as this one https://grabien.com/story.php?id=19088 (try it) and I see this:
http://i.imgur.com/PVAhbYE.png << THe CubeUtils.
It always starts off at MAX VOLUME. How do I change the default volume to always start at say 30%?

You have my empathy! This used to be obvious in versions before Mavericks. Does Apple's silence on this mean they are becoming more Microsoft-like and removing convenient features? That the question of 8 people has gone unanswered for 8 months is unconscionable.

On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

Just purchased new laptop G71-340US. Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

Similar Messages

Maybe you are looking for