My PC wdoes not load apple store completely when i run diagnosis connecting to itunes store unseccessful

I can play musci but the itunes store page does not load up. Its says unseccessful when dianostics are run and  that Im not connedcted to internet. I have Windows XP,,

Hi..
Try turning off the router for about 5 minutes then turn in it back on then restart your iPad.
Hold the power button until "slide to power off" appears.  Slide to power off.  After it is off, press the power button to turn it back on.
If that didn't help, tap Settings > General > Reset > Reset Network Settings
If that didn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • I have an unlock iphone 4s that i buy it not from apple store can and i broke the screen can i repair the screen i apple and how mich is it if yes??

    i have an unlock iphone 4s that i buy it not from apple store can and i broke the screen can i repair the screen i apple and how mich is it if yes??

    Not covered by warranty. If you make an appointment at an Apple store, you will be offered an out of warranty replacement. Cost is US $199 for an iPhone 4S.

  • TS1292 i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    Does the person who gave it to you still have the receipt ? You can try contacting iTunes Support and see what they say (you will probably need to give them images of the front and back of the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • HT1420 When I try to connect to itunes match, I get an error message that says "We could not complete your iTune Store request.  An unknow error occurred (4001).  How do I resolve this issue?

    When I try to connect to itunes match, I get an error message that says "We could not complete your iTunes Store request.  An unknown error occurred (4001).  How do I resolve this issue?

    I purchased iTunes Match several days ago and I am getting the following error when I try to allow iTunes Match to run.  Please advise how to fix this:

  • Can not open apple store from my mac

    can not open apple store from my mac

    Restart your computer.   If that does not work download and apply the combo updater ... Mac OS X 10.6.8 Update Combo v1.1
    It won't matter if you have previously downloaded this update but the action itself has a curative effect for many settings that have gone awry.

  • TS1702 Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes  can't d

    Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes  can't download

    Use the Mac App Store application and go to the purchased tab, which you'll find at the top of the Mac App Store window.

  • I have a problem concerning my icloud mail not my apple store mail...where i cannot access my icloud mail and i forgot my password

    I have a problem concerning my icloud mail not my apple store mail...where i cannot access my icloud mail and i forgot my password

    Hi, fungo47.  
    Thank you for visiting Apple Support Communities.
    You can reset your Apple ID/iCloud password via the steps in the first article below.  If you do not have access to the email account or are not receiving the password reset link, see the second article.
    If you forgot your Apple ID password
    http://support.apple.com/en-us/HT201487
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • HT4623 My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

    My sister has given me an old iPod touch 2 I think it is and after resetting the account info to mine the content was wiped and can not load any games now as it runs 3.1.3 and there all saying they need iOS 5 how can I update it to this

    I suspect you have the original, 1G iPod touch. Those can only go as high as iOS 3.1.3,
    If y ohave a 2G those can go as high as 4.2.1
    Identifying iPod models
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later.
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • TS3297 I can connect to the itunes store through the itunes store app, but when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!

    I can connect to the itunes store through the itunes store app, but when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!
    I've turned my iPad off, then on again, I've logged out of iTunes, and logged back in, I've updated my credit card information, but nothing seems to be working. Is this a problem within the app?

    toshiro-99 wrote:
    when I try to make a purchase within Clash of Clans a box comes up saying my purchase cannot be completed, and another saying cannot connect to itunes store. HELP!
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there.

    My iphoto will not load, all it does when i open it is just show a blank iphoto and won't load any of my photos that were already in there. Any way to fix it ?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My Ipod Touch Is brand new and i just made my apple account. When i try to connect to the app store It comes up "cannot conect to itunes"  I do have itunes on my ipod what can i doo???? please help

    My ipod touch is brand new and i just  made my apple account and when i try to connect to  the app store or  imessage it cant connect please help

    Try here:
    Can't connect to the iTunes Store
    Try changing he DNS to Google's 8.8.8.8

  • Applet does not load on app server when Free Design Layout

    Hi,
    I have to embed a an applet in a webpage of an web application. Before I go on to anything.. let me first tell you, I am using Netbeans 6.0
    As shown in the tuorial:
    [http://www.netbeans.org/kb/articles/tutorial-applets-40.html]
    1. I first made the "Applet" source say HelloApplet. java. After compiling and running it I get the HelloApplet.jar.
    2. I created a WebApplication and then from the properties -> packaging -> I "Add Project" HelloApplet.jar.
    3. Then I a webpage I "embeded" the applet.
    4. I run the web app and the applet gets loaded and everything is just fine.
    But before I go on I must tell you that the applet was designed in Null Layout. Now I edited the applet source once again and changed the layout to Free Design Layout*. ( this is available from Netbeans..on the HelloApplet.java .. go to the design view.. right click on the form and from the context menu you can change the layout to FreeDesign or whatever you might want).
    When I expand the "Libraries" node I see the that the library Swing Layout Extensions - swing-layout-1.0.3.jar has been added.
    When I "run" the "HelloApplet.java" file, the applet is shown in the appletviewer. No problems with that.
    But!
    When I try to Clean & Build and Run the WebApplication, the applet does not get loaded. On inspecting the java console I see the following error:
    java.lang.NoClassDefFoundError: org/jdesktop/layout/GroupLayout$Group
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
    at java.lang.Class.getConstructor0(Unknown Source)
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    at sun.applet.AppletPanel.createApplet(Unknown Source)
    at sun.plugin.AppletViewer.createApplet(Unknown Source)
    at sun.applet.AppletPanel.runLoader(Unknown Source)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.lang.ClassNotFoundException: org.jdesktop.layout.GroupLayout$Group
    at sun.applet.AppletClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.applet.AppletClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    ... 10 moreIt clearly shows that the Free Design Layout has something to do with the GroupLayout which can be found by expanding the "Swing Layout Extensions - swing-layout-1.0.3.jar". Now when the HelloApplet.jar is created only the HelloApplet.class file gets included together with some other data but NOT the swing extensions. Hence when I run the web app the class file looks for the GroupLayout.class definition but can find it in the jar as its not included when the HelloApplet.jar is created.
    But with null layout there isint a problem because null layout takes the definitions from the JRE on the machine.. and so it runs without a hitch.
    My Question is : How can I run the applet with Free Design Layout? or is it possible to package the swing layout extensions in the HelloApplet.jar?<</u>
    Thanks for all your replies.
    Cheers.
    Edited by: arijit_datta on May 15, 2008 4:07 PM

    Solved.
    Here is the solution:
    [http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html|http://www.nabble.com/Applet-does-not-load-on-app-server-when-Free-Design-Layout-to17259115.html]
    Cheers..
    Edited by: arijit_datta on May 16, 2008 7:41 AM

  • Apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2

    I can't install itunes for windows 7 to 64bit i tried several times and at the end show up this...
    "apple application support was not found apple application is required to run ituneshelper please un istall itunes then install itunes again erro 2" ..so what it does mean? ..can somebody help me for this please? thanks

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    My iPad is suddenly not loading any apps.  When I click on an app, the screen flickers to black and then back to normal, but will not load the app.  This is ALL the apps, not just one.  Have tried rebooting, to no avail.

    Was a Restore one of the things tried.?  [Attach the iPad to your computer and in iTunes click on your device. On the Summary page click on Restore and go through the process. Be sure to click YES to Restore from a previous backup.]

Maybe you are looking for