My pc windows vista home system and Windows Vista Ultimate both service pack 2 and itunes do not recognize the ipod touch 4g, ios 5

my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'

Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir

Similar Messages

  • I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck.  However...
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Itunes does not recognize my iPod Touch using Windows 7 - 64bit

    Itunes does not recognize my iPod Touch using Windows 7 - 64bit. Is this a driver issue? Has anyone else had this problem? Is there a fix?
    Message was edited by: Mark DiGiacomo

    hi sally,
    see if this user tip by Yorkwill helps:
    +In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:+
    +1. First off you need to have iTunes installed and the ipod touch plugged in+
    +and recognized as ‘something’ e.g. digital camera (it shouldn’t really+
    +matter what it’s recognized as, but it needs to be found by windows).+
    +2. Search for usbaapl in the C:\WINDOWS system folder:+
    +o open windows explorer (e.g. Right-click Start and then click ‘explore’)+
    +o right-click the WINDOWS folder and select ‘Search’).+
    +o type in usbaapl and hit Search – try to ignore the dog!+
    +You should find the driver info in a sub folder of+
    +C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B+
    +Remember that location (either leave the search box open or copy the folder+
    +name into note pad – you’ll need it later)+
    +If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not+
    +been installed with the iTunes install and you’ll have to reinstall iTunes.+
    +3. Locate the ipod-camera device:+
    +o Open the device manager, e.g. using Start > Control Panel >+
    +Performance and Maintenance > System > Hardware Tab > Device Manager+
    +o Look for a device called ‘ipod’ - if your ipod shows up as+
    +‘digital camera’ it will be under something like ‘imaging devices’.+
    +4. Update the driver:+
    +o Right click the ‘ipod-camera’ in device manager and click on+
    +‘Update Driver’ – the Hardware Update Wizard will open.+
    +o Check the ‘Install from a list or specific location’ then click ‘Next’+
    +o Check ‘Search for the best driver in these locations’. Un-check+
    +‘Search removable media’ and check ‘Include this location in the search’.+
    +In the text box below type (or better copy and paste) the folder+
    +containing the ipod driver information found in step 1 (in the example+
    +above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B), +
    +then click Next.+
    +You should now see something like ‘Apple ipod device driver’ or so. Continue+
    +installing that device. Once the driver has been installed the ipod will come+
    +to life and iTunes (if you have it open) will show it.+

  • My iTunes will not recognize my iPod Touch or iPhone 4, Windows 8 does though.

    Anyone out there having the same issue? iTunes will not recognize it no matter what I do. I have followed all the advice about resetting it and redownloading iTunes, restarting the apple mobile device from the command center. I don't know what else to do but something has to be done. Also, it will not recognixe my phine either but it says that it needs drivers for that. Any help would be greatly appreciated.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Itunes will not recognize my ipod touch but windows does

    I use windows 7 and everything was fine until I updated to the most recent version of Itunes 10. something.  Now when I plug in my Ipod windows recognizes it but I get this message from Itunes: iTunes could not connect to this iPod because an unknown error occurred (0xE800000A) 
    Any ideas?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • HT1296 under My Computer using windows 7,  does not recognize the ipod touch

    Whwen clicking on My Computer , IPOD  touch does not show up

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • After updating iTunes for window 8.1 iTunes does not recognize my ipod touch

    My laptop updated to iTunes version 11.1.4.  And now when i hook up my ipod or iphone, itunes does not see it. My laptop still sees both but now i cant download songs to either device. Any ideas anybody?

    Re: Upgraded to iTunes 11.1 and now it won't recognize my iPhone Sep 18, 2013 2:15 PM (in response to davidsh_seattle) I was able to fix it!  iTunes can now see my iPhone5.   I followed these instructions: http://support.apple.com/kb/TS1538   And re-installed the "Apple Mobile Device USB Driver".   •     Right-click the Apple iPhone, Apple iPad, or Apple iPod entry in Device Manager and choose Update Driver from the shortcut menu. •     Click "Browse my computer for driver software." •     Click "Let me pick from a list of device drivers on my computer." •     Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.) •     In the "Install from Disk" dialog, click the Browse button. •     Use this window to navigate to the following folder:  C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. •     Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead). •     Click OK in the "Install from Disk" dialog. •     Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.  this worked to sync my iphone 5. not i4 or i3 phones(now ipods) In Device Manager I also noticed I had 3 apple drivers under Portable devices.  I deleted two of them. I updated the remaining driver, now I can sync my i5, i4 and i3.  You may have to View hidden devices.

  • Apple update ruined my playlists, they are no longer on my ipod and playlist i didnt have are. how can I get mine back. And i am missing songs that appear in itunes but not on the ipod?

    apple update erased my playlists, they are no longer showing on my iTunes. I am missing songs that do appear in iTunes and should be on the ipod but are not, and new playlists that I didn't have are now where mine should be. Any suggestions as to getting "MY" ipod back?

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I had to pay to have Apple replace my iPod Nano (6th gen.). I connected it to my PC and a window came up saying something about needing to restore the iPod to work with Windows, so I hit "restore iPod".  iTunes will not recognize the iPod. Suggestions?

    Newly replaced iPod Nano (6th generation) not recognized by iTunes on PC. Any suggestions?

    Hi LaureltheVictor,
    Thanks for visiting Apple Support Communities.
    See this link for some additional troubleshooting tips:
    http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
    Best,
    Jeremy

  • Windows and iTunes do not recognize my iPod..... HELP!!!!!!

    Hello!
    HELP PLEASE!!! Windows Vista and iTunes do not recognize my iPod!!   I dont understand why because everything went well for at least 2 weeks!!   But now, my Ipod only appears even more in my computer, so ITune do not recognize on.  
    I need your help before remove ITune and all Apple produces. This is what I do if I made a following Apple support but before mde this, I need your help for to see if there's something simple to try before.
    I'm open to any good suggestion!
    Thank you!
    Zazzz
    P.S. Sorry for my English, I do my best.... because i'm french.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

    My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Updated to Windows 8.1 and ITunes will not recognize the nano 6th generatio IPod

    Updated to Windows 8.1 and ITunes will not recognize the nano 6th geneartion IPod. I tried all the things that was listed on troubleshooting. Help

    Did you ever get help for this? I use the radio feature often and now it will not play, since updating to Windows 8.1.

  • Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

    Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

    So yu tried all of this:
    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for error 1604.
    When prompted, click OK.
    Close and reopen iTunes while iPhone remains connected.
    iPhone should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    If you had then time for an appointment at ther Genius Bar of an Apple store.

  • Windows 7 does not recognize my iPod touch 5--doesn't even charge the device. HELP!

    My computer at work will not recognize my iPod touch generation 5.  I've had increasing problems and now today when I plug it into the USB port, it will not recognize it.
    I've uninstalled all the Apple, iTunes etc. software and reinstalled, I've rebooted the computer 3-4 times.  I've uninstalled and reinstalled the USB driver.
    It will not work.  Ideas? 

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for