My PCIe 1433 device does not show active channel in MAX
I have a PCIe 1433 installed and it worked fine for a year. However, since last week, the channel "img0" was disappear from the device list in MAX as shown in the attached figure.
The channel name is now list as "c0000039" instead of "img0", and there is no other menu except save and refresh on the right pane as shown in figure.
The labview based module, MAX, and the vision acquisition module is all 2014 version. I can locate the "img0.iid" file as well as the necessary camera file in my PC.
Any idea what might cause this issue? Please feel free to ask me if you need some more info or suggestion.
Thanks.
Eric,
Thanks for your reply.
We recently switched to Labview 2014 64bit version about a month ago. But everything worked fine back then.
The problem just happened last week. I confirmed that it worked just fine the week before.
Is it possible that this issue is cause by the 64 bit version?
Here is the list of what I already tried so far that didn't solve the issue;
- I did try repair installation of Vision Acquisition and MAX. --> Nothing change
- I did try connect another working camera --> Same problem
- I put the frame grabber in another PC --> Same problem (exactly the same as shown in the previous picture)
Per your suggestion, I will try to run an IMAQ example with "img0" tomorrow.
I'm not sure if I can get it run though since Laview programm did not recognize the "img0" either.
Similar Messages
-
Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?
Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device. -
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
TS1424 Apple Mobile device does not show up after installing 10.0.7.21
Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
tt2 -
I've just updated my iTunes on my laptop
And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
And i still have no luck
help!Pick the appropriate one of these for advice:
Windows - http://support.apple.com/kb/ts1538
Mac - http://support.apple.com/kb/ts1591 -
After upgrade to ios 6, iphone 4 is not wroking, It suddenly stops responding to any actions. Today it totally stopped and is nothing working. Connected to itunes and the device does not shows up. Please help
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore -
USBTMC device does not show up in MAX.
I have a USB device that will not show up in MAX. When I plug the device into the computer, it is recognized as a USBTMC device and Windows chooses NiUsbTmc.sys as the driver. I believe it also uses niusbtmc.inf and niusbtmc.pnf. After going through the process and rebooting, the device shows up in the Windows device manager as a USB Test & Measurement device. When I open MAX, the device does not show up in the device tree, nor can I seem to find a way to communicate with it. So I uninstalled the device, removed the files above to a temp directory, rebooted, and then created a new inf file using the VISA driver wizard. After going through that whole process, rebooting and then plugging the device back into the computer, I directed Windows to use the new inf file. The device now shows up in the Windows device manger as a NI-VISA device and the driver is NiViUsbK.sys. I open MAX back up and the device is nowhere to be found. I tried using the VISA Interactive control to find the device, but no luck. What step or steps am I missing?
Just plugging the instrument in should have made the device appear as USBTMC in MAX and using the driver wizard is not correct. I don't understand why it didn't show up in MAX with either method though. I've only a small amount of experience with USBTMC but have used the wizard a lot for internally developed USB instruments and they have always appeared in MAX. What version of VISA are you using? The latest version is 4.1 that can be downloaded from http://digital.ni.com/softlib.nsf/websearch/B1A7837FFFD2826E8625729100689D3C?opendocument&node=13207....
-
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.) -
TS2634 When I open iTunes using PC, the device does not show up anywhere
The device does not show up anywhere. This is happening for iPhone and iPad. Thoughts?
Hi Friednhook,
If you are having an issue with your devices not being recognized in iTunes on your Windows PC, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
W520: Unable to boot from USB - device does not show up in boot menu
I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
Thanks,
CSHello Neil
Thanks for getting back to me
The issue was that the usb drives were disabled in the bios from the Startup menu.
To enable
1. Enter bios
2. Select boot
3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
4. Select the device you require (in my case USB HDD)
5. Save and exit.
You can now boot from a usb stick and install the Linux distro of your choice :-)
Cheers -
iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.
I think this article will help you.
-
"Device" does not show in iTunes to start syncing when I plug in my iphone
"Device" does not show on my latest itunes on my MacBookPro, using Mountain Lion to sync my Iphone,how can I get it to show up?
ThanksHi Chiquita,
Do you have your Sidebar showing? Go to the top of the screen and click on View, then click on "Show Sidebar".
See if that resolves your issue.
Cheers,
GB -
My new ipad will not sync with itunes. the device does not show up in itunes
my new ipad will not sync with itunes. the device does not show up in itunes. I am on a Windows system
Do you have the absolute latest version of iTunes downloaded? If your iTunes software has not been updated in some time, your iPad will not be recognized. With iTunes open, click on Store at the top. Check for available downloads and if there are any, download them. Once you've verified you have the latest software, connect your device again, and it should be recognized.
-
Device does not show up on i tunes
new i phone 5 device does not show up on itunes. wanting to sync new device
Have you used any other iOS devices with the computer?
Try reinstalling the latest version of iTunes.
If that doesn't take care of it, one of these Apple docs should help ya out:
iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X -
I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1. When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes. The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.
Hi,
Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.
Maybe you are looking for
-
Calling a report from a web form & specifying PDF format
Has anyone been able to call a report from Oracle Forms (6i or 9i) in a web browser (i.e. by pressing a button or any other link)? We are having problems generating the report in PDF format when we web deployed our forms. In client server mode it wor
-
Help requierd on mail sender adapter
i m workin on a scenario to send email from a mail server inbox to XI.i need to configure mail sender adapter....need step by step help on that. regards, latika.
-
COMO CREAR EJECUTABLE DESDE CRYSTAL REPORTS VERSION XXI
Hola, A diferencia de versiones anteriores, en la XI no localizo como crear un ejecutable (.exe), de un report creado, para que sea lanzado desde otra máquina. Gracias
-
User has deleted checked out files
A user has deleted the local roboholp project folder with checked out files. (Robohelp HTML Version 9.0) The files are published as a webpage so the content is in HTML files - is there a way to get the content back in Robohelp? And how can I check-i
-
I cannot get iTunes to recognize a backup CD from an iTunes library on a previous computer. I cannot import files from that CD (nothing happens). And, when I begrudgingly (as expressed throughout this post)try to repurchase the music, suddenly the so