My Pcs don't see any wireless conection to airport extreme

I have a Fujitsu laptop and an HP entertainment center with media center. Both are wi-fi enabled. I installed the airport extreme station on my imac G5 it works great. But when I tried to connect the pc wirelessly they don't see any wireless conection. What I have to do was conect the entertainment center with a network cable to the base station, so I can share my internet conection. Despite I put the base station right in front the pcs, they dont see it. I want to have real wireless in my apartment.

Hi Lisetica:
When you set up your Airport Exterme Base Station, did you select "Create a Closed Network"? If so, this will prevent your SSID from being broadcasted.

Similar Messages

  • Satellite L300-17L - don't see any wireless networks detected

    Hello all,
    I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card.
    First, I installed the driver pointed by this site but I discovered that the card is actually an Intel Pro 3945 card, not Realtek as specified in the driver section.
    Now I installed the driver for the INTEL PRO 3945ABG, version 11.5.1.15 and also the PRO Set utility, and I don't see any wireless networks detected.
    I have a colleague that sees many networks using the same adapter but on a other Laptop.
    I also tested the switch on the Laptop and it is on.
    Did you experience this kind of problems on your system ? Please help me because I am really sad because of this issue.
    Thanks & Best regards
    Valentin

    Hi
    As far as I know this notebook was equipped with the Intel 11a/b/g WLan card.
    You should firstly check if the WLan router and the WLan card use the same WLan standard.
    In the WLan card properties (in device manger) you could check this settings choosing Advanced tab.
    I would also recommend checking if the WLan was enabled properly
    Bye

  • Airport extreme can't see any wireless networks.

    Hi, I have an iMac that has always used an ethernet connection to the internet, but now I want to connect wirelessly. But it doesn't seem to "see" any networks, mine or otherwise, which work fine on my other apple devices. Does the fact that my wireless card was purchased (as was the imac itself) overseas make it incompatible with US wireless networks? Or is the card broken and I have to take the computer in for repair? Or is there some way I can resolve it myself?
    Here is what my Airport card info says:
    AirPort Card Information:
      Wireless Card Type:          AirPort Extreme  (0x14E4, 0x88)
      Wireless Card Locale:          Asia Pacific
      Wireless Card Firmware Version:          Broadcom BCM43xx 1.0 (5.10.91.22)
      Current Wireless Network:          wireless network not available

    Yes, it does. Still doesn't "see" any networks. If I need a new airport card, is this something I can do myself or does it have to be done at an apple repair shop?

  • Ios 5 Update New Features says that iCal now has a week view for iPhone but after updating last weekend, I don't see any week view--just List, Day and Month..How do I get the week view?

    ios 5 Update New Features says that calendar now has a week view but after updating my iPhone 4 last weekend, I don't see any week view for iCal--just List, Day and Month as in the past. Is the weekly view available for iCal and if so, how do I access it?

    Rotate your phone to landscape.

  • I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

    I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

    iTunes- How to move your music to a new computer
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info?

    I'm trying to set up Family Sharing. My settings show that the people I chose are there but I don't see any shared information. How do I access the shared info? All computers are using Yosemite 10.10.1 and are new 13" MacBook Pros.

    Hi wmcknigh,
    Welcome to Apple Support Communities.
    The article below should help you resolve the issue with shared content not appearing after setting up Family sharing on the MacBook Pros.
    If you don't see your family's shared content - Apple Support
    Cheers,
    -Jason

  • HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.  How do I print just 1 page out of 14 pages .  I don't see any settings on my iPod and can't find settings on the printer .   Can someone help with this

    I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. 
    How do I print just 1 page out of 14 pages . 
    I don't see any settings on my iPod and can't find settings on the printer .  
    Can someone help with this problem

    Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
    http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

  • How I can delete add-in in windows 8.1 ,I see only enable and disable function but I don't see any add-in delete function

    hi,
    how I can delete  add-in applications in add-in applications section ,  I try to delete one but I don't see any delete function, I see only enable and disable function in the manage add-in applications wizard.
    thanks
    johan
    h.david

    Hi,
    If you want to remove the add-ins of Office 2010 programs, you need to remove it from control panel.
    For example, if you use Excel, please try to follow the link to delete the add-ins:
    http://office.microsoft.com/en-us/excel-help/add-or-remove-add-ins-HP010342658.aspx
    If I misunderstand something, please let me know.
    Regards,
    George Zhao
    TechNet Community Support

  • Cannot see any Wireless networks

    After installing the latest security update for 10.3.9, I can no longer see any wireless networks. I have tried reseating my airport card along with unpluging the antenna with no luck. I have also repaired permissions and trashed the Network Interface preference file, again nada. Another suggestions would be greatly appreciated.
    I have a relatively new Airport Express base station at home and I have also tried testing the connection at several wireless hotspots.

    I had the same problem and that's why I ventured here for the first time after an hour's battle this morning.
    My solution: restart the computer. Just when the menu has gone out of sight, you get the Keychain pop-up box informing you that the airport application has been changed and whether you wish to allow Keychain access to this new version as well. Here's the tricky part. You must react within 1 (one) second to the pop-up screen and click the "always allow"-button. Once the computer has rebooted, you should have access to your Airport network once more.
    Clunky? Yes. With me, the problem was even more bizarre. I could see my trusted network in the Airport drop-down menu but even if the computer seemed to connect to it, I couldn't get an IP. Sometimes the whole upper right corner icon bar would freeze if I tried connecting.
    Puzzling? You bet. I'm rather perplexed as to why I couldn't just solve this problem by removing and re-adding the Airport Keychain entry with the new version. I can only conclude: thank you, Apple, for making patches that work.
    Experienced people: how do I relay my bug report to Apple?
    iBook G3   Mac OS X (10.3.9)   Airport + extra RAM

  • Mac Mini - Core Solo - Won't See Any Wireless network

    I have a Mac Mini, first gen Intel, Core Solo, that won't see any wireless networks. However, it will see my extreme basestation, and my two airport express devices over bonjour, which makes me think that the wireless device is working.
    I've reset the PMU, with no luck.
    Any suggestions?

    Does an Airport card show in the system profiler?
    Is Airport switched on in your mini - the Airport icon in the menu bar should show at least grey bars rather than an empty white 'fan' shape?
    With Airport on, when you click on the Airport icon, does it show any network?
    If you click on 'Join Other Network' and type the name of the wifi network you run, what error message does the system give?
    How far away from the wifi base station is the mini? What kind of structures and environment is it in?
    If you move the mini to be in close proximity to the wifi base station, does it show any signal?
    When you download a copy of AP Grapher (http://www.chimoosoft.com/apgrapher.html) and run it, what does it show for signals, noise etc?
    How is the mini seeing any wifi devices via Bonjour - do you have it wired into your network? If so, the fact that the devices appear via bonjour doesn't mean they are transmitting wifi, nor that they are in range.
    By the way, the Core Solo mini doesn't have a PMU to reset. If you used the PMU reset procedure it won't have helped, and may actually have caused problems. The correct procedure for an Intel-based mini is an SMC reset, as follows:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, *making sure the power button is not being pressed* at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.

  • I don't see any way of configuring a web server in 10.9; this was always present in previous releases.  How to I set up a website on OSX 10.9.1?

    I upgraded from Snow Leopard, where performance was great on my Mac Mini, to Mountain Lion, where performance is so bad that I'm now attempting a clean-install of Mavericks.  But, I don't see any way to set up my local website.  I don't see a Sites directory or any control in System Preferences to set up the web site.  How is this done in Mavericks?

    Yes, the functionality has departed System Preferences. Here is an updated guide to jump start your solution. It deals with the Terminal solution below.
    There are two approaches to launching a web server in Mavericks.
    Terminalsudo apachectl {start|stop|restart}
    System Preferences solutions
    Web Sharing Preference Pane (free, originally for Mt. Lion)
    VirtualHostX ($)

  • HT201302 when i connect my iphone with computer i don't see any folder in my computer so that i could open and copy my pictures .

    when i connect my iphone with computer i don't see any folder in my computer so that i could open and copy my pictures . how do  i fix this problem?? P.S i have been using iphone since 3 years and this is the first time i face this issue.
    This is my 3rd iphone 4S while this issue wasn't pressent when i bought it but yesterday while i was watching my pctures suddnly the pictures automatically showed an error! but the folder of iphone with the icon of camera was still there but today i can't see that folder moreover i have synced my phone using itunes on my computer and charged as well so that means its not the connectivity problem.
    Another thing i am facing right now is that i made photo stream on in my phone but couldnt find any of picture on my pc i installed icloud panl but still in photo stream there are 0 photos and it never happend in iphone 4 while i am using the same apple id and it shows that it have uploaded my images on i cloud how do i get that??? 
    please help me so i could have my images into my pc
    i am using windows 8 and phone is iphone 4S with IOS 6.0.1

    iCloud: Troubleshooting iCloud Contacts
    Yahoo won't sync with iCloud and isn't supposed to.

  • Why can't I save as my photoshop cs4 file to .png file? I don't see any option now?

    Hi,
    why can't I save as my photoshop cs4 file to .png file? I don't see any option for saving .png in Save As diolog box now? It was working fine until yesterday. Neither I can open a .png file nor save my psd file to png file?
    Please help. I am using Microsoft Window XP Professional and Photoshop CS4.

    In Photoshop CS4, .png open/save support was provided by a plug-in.  It is possible the plug-in has been deleted or moved, or has become unavailable to Photoshop because of a change in file protections.
    Do you have the file PNG.8BI on your system.  It should be here on a 32 bit Windows system:
    C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\File Formats\PNG.8BI
    -Noel

  • .  It's not clear to me if the default sync for calendar is the iphone or my mac (shows 82 modifications).  I want it to default to the mac but the wording suggests the iphone.  Also, I don't see any way to do the syncy

    I'm having trouble with a sync alert.  It's not clear to me if the default sync for calendar is my iphone (3G) or my mac (shows 82 modifications).  I want it to default to the mac but the wording suggests the iphone.  Anybody know the default device and if it can be and if the other can be selected if desired
    Also, I don't see any way to do the sync on an individual entry basis for calendar.  Looks like it will only do all of them at once.  I'd like to go through them one by one to confirm which entry is correct.
    Thanks
    PS This message ("Syncing with [OWNER'S NAME] iphone will change more than xx% of your calendars events or todos on this computer) only started when I recently updated my OS.

    bubblesblom wrote:
    Okay, so my friends think it is funny to change the passcode on my iPhone.
    Maybe you should get new friends.
    I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
    If you can't update or restore your iOS device - Apple Support
    If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
    iCloud: Erase your device - Apple Support
    This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

  • How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.

    How do I get a refund?  I have tried to use this converter to change a PDF to a word document or excel document three of four times and it always fails..  I want my money back but don't see any way to communicate with Adobe.  i really just want my money back.  Very disappointed.  Also disappointed that it is so hard to find a way to communicate with Adobe that I have to resort to asking this question in this forum. 

    You need to use the CHAT link in support to reach Adobe staff. Be sure you know the product name you are trying to cancel, Adobe have lots of products, several converters etc. I think it is ExportPDF you have, most likely.

Maybe you are looking for