My Pearl 8100 is not recognized by my Windows 7 computer and Desktop SW 6.0
I cannot get my newly installed desktop software (v6.0) to detect my Pearl 8100 when I connect it through USB. Upon the first software installation, it will recognize and sync once but after disconnecting and reconnecting, it will not detect. I have to unload the software and re-load in order to get another detection. Any ideas why it will not detect on subsequent connections? The USB cable does not appear to be the issue.
Hello hanley10067 and welcome to the BlackBerry Support Community Forums.
Have a look at this article KB15486 "Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting steps"
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!
Similar Messages
-
While updating my Ipod to ios 5 an unexpected arror occured before my data was restored and now Itunes will not recognise my Ipod. My Ipod is also not seen as a device in My Computer but asks me to install drivers. What can I do?
- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
IOS device not recognized in iTunes, Windows 7 Computer, or Device Manager
Sometime last week, I ran the updates for my computer. When I plugged in my iPod Touch afterwards, it would not connect to iTunes, although on the iPod itself, I could see it was connected based on the "charging" symbol on the battery icon. So I checked if my computer recognized it as a "Device with removable memory in the computer. Only "DVD RW Drive (E)" showed up and under the "Other" section only showed my iCloud Photos folder. I also checked the device manager for any drive with the name Apple- none. I have only 2 USB ports on my computer, and I've switched between them over and over. No result. I have checked the hardware id's on all my USB drives in the device manager, and I only find the HP TrueVision camera on my laptop.
After a couple of hours browsing through the support forums, I was able to restore the driver, thus allowing my iPod to be recognized again by the computer and iTunes.
on 10/14/13 I ran the installation for updates again, and the same problem occured with my iPod. So I went through the same steps from last week, but this time, no changes. I still cant get the drive back on my device manager. I've gone through all the support pages pertaining to anything and everything about this issue, and still, everything I tried from and simple computer restore to a clean boot has still rendered no results. I know my USB cable works because im able to charge my iPod from any outlet (computer, A/C adapter, car adapter) and sadly I do not have the means to try on another computer.
I have a HP 64-bit Computer running Windows 7 service pack 1.
iTunes version 11.1 currently installed.
iPod Touch 4th Generation iOS version 6.1.3.
The Apple Mobile Device Support is installed.
Can someone heplp me?Have you tried to give your iPod a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and try again.
Have you tried different USB ports? Rebooted your computer?
Uninstalled and then reinstalled iTunes? (You won't lose content if you uninstall) -
My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes and reinstalling it, but it had no affect. The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable. When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine). There seems to be something out of wack with this PC/iPod combo. Any thoughts on what I can do to try to resolve this issue? I tried all of the steps listed here, but they didn't help me. http://support.apple.com/kb/TS1538
Any help would be greatly appreciated.Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
My ipod nano is not recognized in itunes on my computer, when it has in the past. How do I fix this problem?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?
My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?
I had the same problem with my phone, its a 3gs, out of no where my laptop stop recognizing it and wouldnt charge either, i got worried because i had all my pix and videos on my phone and didn't have a copy, so i started searching on the internet for an answer to my issue, bought extra usb cables, used different laptops and nothing worked .. Untill i took my cell phone apart and thought about replacing the (charge port assembly for apple Iphone 3gs) so ordered the part online and 3 days later got it and i just replaced it right now... and guess what/??? IT WORKED!!! YEAP.. NOW MY CELL IS CHARGING AND I JUST SYNC MY STUFF.. I HOPE THIS CAN SOLVE YOUR PROBLEM... AND ONLY COST ME 8 DLLS
-
My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
IPad is not recognized by iTunes or my computer.
iPad is not recognized by iTunes or my computer. Running 10.6.7, restarted, removed and reinstalled iTunes, erased iPad, removed latest 3rd Party software, tried 3 different wires, nothing is working. Worked fine for months, then stopped. HELP!
This blows.
R!iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125 -
Ipod not recognized by anything on my computer!!!!
My ipod is not recognized by anything on my computer. When i plug it in it says "do not disconnect", but it won't show up in itunes or ipod updater. I have taken it to the Genius Bar at an apple store here in town.....but they said that it was pretty much ruined since i do't have a warranty any longer. I am really upset that it so far cannot be fixed. I would like to fix it instead of buying a new one, because i love this one so much! Please Help.....Please Help!!!
Preston.Go to the Apple Shop again, and ask them a favour for doing a Restore for your iPod but with a Mac computer. It is very likely to get mount with a Mac, once it has being completed, bring it back and plug it with your PC, and do a Restore back in PC version
-
I have a new Windows 8 computer, and I tunes will not recognize my phone, but I can charge it fine with the USB cable.
follow this: iOS: Device not recognized in iTunes for Windows - Support - Apple
-
Your address was not recognized. Please check your entry and try again.
I'm trying to register for the free 30 day trial.
I get
"Your address was not recognized. Please check your entry and try again."
My address works fine for the postman, deliveries etc. Another case of a programmer who knows better!
What are the address requirements on the sign-up form, so I can proceed?
PeteHi
Which product do you want to register for? Office 365, SharePoint or Office 2013?
Since this forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office, and your question is related to the free trial registering of Microsoft products, I suggest you posting it in Answers
Forum for more efficient responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My iPhone 4S locked to Tmobile so I contacted to Tmobile and submitted unlocking form, but I got a replied said my IMEI number was not recognized. So I tried second and third time submitted the form and got same reply. I've been using same handset they issued to and never changed. But I have know idea why they said they don't recognised my IMEI number. Can anyone help me to solve this issue. Thanks
You need to call T-Mobile or visit a T-Mobile retail store.
-
Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
S205 w/ Windows Home Premium not recognizing Integrated WebCam - Windows 7 Drivers?
I just got an awesome deal on an S205 netbook. Everything is great except that I cannot get the WebCam to work. This is a deal breaker. If I can't figure it out I'll be returning it.
So far I have tried various things. When I first started this I couldn't figure things out. There was no camera in the Device Manager and nothing obvious on the system (hardware, software) about a camera, except that I can see it, physically on the netbook and know it came with a WebCam. How to use it? Nada. So I went to the Lenovo site & installed a driver and then Skype. The microphone works in Skype, but no picture. Totally black. However, it automatically brings up Lenovo YouCam when you test the video in Skype. So that helped as this software was not recognizing a camera either, so I knew it wasn't just Skype.
Then I figured out that I needed to hit Fn+Esc to enable the webcam. I thought that was the ticket. However, as soon as I did that I got a message that the USB device was not recognized. I uninstalled the driver and went back to reinstall it to see if that might help, however at this time I realized that the driver's on Lenovo's site for the s205 are for XP not Windows 7. Seriously? Turns out there are two different sites. http://support.lenovo.com and http://consumersupport.lenovo.com The later has the Windows 7 version, the first site lists Xp drivers ... Installed the W7 Driver again, but still not working or recognizing the camera ... Anyway, I am not a techie, but I am pretty decent at figuring stuff out or Googling and researching this stuff online. Or following your directions/suggestions. From my searching so far no one seems to have this exact issue. Most it is either not having software to use the camera or not having it enabled and neither of these are my issue. Any ideas for what my next step should be? Details on my system below. Thanks!
Lenonvo ideaPad - 11.6" 1366x768 LED; AMD Dual-Core E-350 1.6GHz; 4GB RAM; 500GB HDD; 802.11n; Windows 7 Home Premium; ATI Radeon HD6310M graphics; webcam; 6-cell battery
Solved!
Go to Solution.I've had some webcam issues, too.
Sadly, the webcam device ID is not listed in the driver available for download at the support page.
Thus, installing this driver is pointless.
Nevertheless, you can force the driver installation and it will work as it should.
Please have a look at the device manager.
Double-click the unknown device, go to Details and select the Hardware ID property.
It should be USB\VID_5986&PID_0292&REV_1403&MI_00
(In case you got a different VendorID/ProductID, google them. You should quickly find something. Be sure this device is the webcam and not some other device. Otherwise don't continue.)
Now unpack the driver setup file with 7-zip or WinRaR.
Back to the Device Manager -> Double-click the device, select the Driver tab, click Update Driver and browse for the extracted folder. You will need the Bison subfolder.
Good luck. -
i just got my iphone 5c today and i tryed to connect it to my windows 8 computer and connect it to itunes but its not showing up on either on. what should i do? i already uninstalled and re-insstalled itunes and its till a problem
Hello, bluebelle95.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.
Maybe you are looking for
-
Is there a simple way to refresh a SQL Query (Updatable report) region
I have a page in APex 4.1 that has many regions. I would like to be able to refresh a single region. Currently, I have the following Region (sql query updateable report). STATIC ID = LANDINGS in the region footer, I have: <script type="text/javascrip
-
I purchased a new iPad and my old iPad went to my daughter. I have a problem though in that my iTunes account has been taken over by her email address. If I want to redeem a voucher on my account her email address appears. How do I correct this?
-
So.. lets say I take 100 photos on my iphone in one day. They will appear in both my photo stream and my camera roll. But after 30 days the 100 photos I took 30 days ago will be deleted from my photo stream automatically. Will they still appear i
-
XML parsing - Thanks Andrew Clarke,info you wanted to answer
Andrew , First of all thanks for responding.It was indeed very helpful of you.I have put your questions here just and have answered it " This is a tricky thing to do. Parsing and processing a document in the database is relatively straightforward. Al
-
"Out of range" error at analog input
Hello! I use a PCI 1200 card with Nidaq 6.6.0 and Labview 5.1 support files on Windows NT for data aquisition. My programm has one digital channel and three analog input channels. I didn't write the programm myself but bought it in 1999 together with