My Personal Hotspot suddenly Stopped working..What is the possible reason??plzz reply ASAP

Please help me. I'm Switching on my Personal Hotspot option but still hotspot isn't getting ON. what are the possible reasons reply ASAP

iOS: Troubleshooting Personal Hotspot - Apple Support

Similar Messages

If the trigger is not working what is the possible reason

I update the form then suppose auto update the table PaymentRecords , but today it sudden not working , not error on the trigger , what is the possible mistake ??
delimiter $$
CREATE TRIGGER Date_PaymentRecord
AFTER UPDATE ON tableA
FOR EACH ROW BEGIN
IF NEW.Ast= 'on' THEN
UPDATE PaymentRecords SET DueDate = New.ADate
WHERE FeeType = 'Fee 1st Instalment'
and PaymentRecords.UserId=New.UserId;
end if;
END$$
delimiter ;
not error at all , just not work

This is the forum for issues with the SQL Developer tool. You should ask your question in the SQL and PL/SQL forum.

My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?

My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do?, My charger doesn't want to plug in to the phone,it suddenly stopped working.What should I do? iPhone 5

Clean the lint/debris from the charging port and plug the cable in.

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

What's the possible reason to lock a login account?

If a login account locked not by sp_locklogin. what 's the possible reason to lock a login account?
for testing purpose, I try to connect ASE 15.4 with a specific account and put a wrong password intentionally more than 5 times with sybase central but the account not locked.

Do you have ASE configured to lock logins after 5 failed attempts?
This can be configured serverwide with
sp_configure "maximum failed logins", 5
-bret

The keyboard and trackpad to my 2008 MacBook suddenly stopped working, what's wrong with it/ what should I do to fix it?

The keyboard and trackpad to my 2008 MacBook suddenly stopped working. I've restarted the computer several times and no help. I had some keyboard maintenance done a few months ago at a repair shop so I don't know if that has anything to do with it. What should I do?

First thing I would try would be to remove the battery from your MacBook, connect the computer to it's power adapter and start up, then see if the keyboard and trackpad work normally. Some older batteries have been known to expand and interfere with keyboard and trackpad. If this works, replace the battery.
Best of luck.

HT4061 My iPhone5 suddenly stop working, what can I do to resolve the issue?

I don't know what to do my Iphone 5 just suddenly stop working, wont turn or anything.

Hi The Great One 365,
If your having an issue where your iPhone 5 won't turn on at all, I would take a look at the Power/Battery troubleshooting in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Regards,
- Brenden

What are the possible reasons why this R3 info not getting to BW?

Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks

1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps.

I can no longer connect to the internet on my laptop using my personal hotspot. Stopped working all of a sudden. Any tips as to why?

I used to always use my personal hotspot and connect to the internet on my laptop. Then one day it stopped working. I updated my phone so my hotspot password changed, so I changed that in the properties. It now says it's connected to my iPhone and there's internet access, but when I try to do anything it says not connected.

It shows a connection. When using wifi n USB. I don't know how to connect using Bluetooth seeing what it says to do is totally different from my computer.
I do have a connection but I can only connect to some sites, I tried YouTube n nfl.com n they both worked but google, hotmail n Facebook said couldn't connect.
I tried using safari on my computer n like explorer I could only connect to a few different websites.

The editing feature of photoshop elements stopped working what is the solution

the editing feature of photoshop elements stopped working after i installed nik efex pro wacom pen.

You need to remove third party plugin and try launching. You should find it in plugins folder either here C:\Program Files (x86)\Adobe\Photoshop Elements 10\Plug-Ins or C:\Program Files (x86)\Adobe\Photoshop Elements 10\Locales\en_US\Plug-Ins
Else try skipping the loading of thirdparty plugins like below:
   1. Close Elements.
   2. Launch the Photoshop Elements Welcome Screen and hold down ctrl/cmd + shift as you click Editor/Edit.
   3. Continue to hold the keys until you see a message to skip loading of 3rd party plugins..Click yes and check.
Thanks,
Garry

My trackpad is not working what is the possible cause

please help me find solution on how to operate again my trackpad because it is not working..

Is your MacBook one with an easily removeable battery? If it is, shut down the MacBook and take the battery out. Connect the MacBook to a power source with its power adapter. Restart the MacBook. Test without the battery installed.
Inspect the battery for any signs of expansion. If any are found, or if the MacBook trackpad works normally without the battery, replace the battery.
Best of luck.

What are the possible reasons for a procedure to go into uncompiled state?

hi,
we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
following is the error message that is displayed when this procedures are failed:
ORA-04062: timestamp of package has been changed.
Kindly help me.
Thanks,
Raaji.

Thanks for the reply.
No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
SELECT name, value
FROM gv$parameter
WHERE name = 'remote_dependencies_mode';
Do I need to change this value to SIGNATURE?
Thanks,
Raaji.

My wifi on my imac has suddenly stopped working I have the wifi exclamation mark when I try to log into my network it shows a strong signal but no joy. My macbook and iphone work fine

WWifi exclamation mark had suddenly appeared on my imac. I have rebooted imac and router

When you see an exclamation point in the Wi-Fi menu, first turn Wi-Fi off and back on. If it still fails to connect, then from the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, restart the computer and try again. If there's no change, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
If there's still no connection, and if you have control of the router, compare its settings to Apple's recommendations. Some third-party routers may be incompatible in 802.11b/g/n radio mode. Try setting the mode to 802.11n only.

Exchange email suddenly stopped working unless on the same wifi as the server.

I am the IT person at a small Construction company. We are running SBS 2008 with Exchange 2007. I have 6 Verizon iPhone 5's that the employees use. Up until the last two weeks everthing has been running fine, then everyone started getting "Cannot Get Mail, The connection to the server failed." But as soon as they are back at the office on WIFI the mail syncs just fine. No changes were made to the server or router in the last 3 months. Any and all help is greatly appreicated.

Sounds like a problem with your firewall. Have you confirmed that the settings are still correct? Have you tried rebooting it?
Try testing it from outside your network using this tool: https://www.testexchangeconnectivity.com/
If it fails the test, but you're positive the firewall settings are correct, contact your ISP.

My Personal Hotspot suddenly Stopped working..What is the possible reason??plzz reply ASAP

Similar Messages

Maybe you are looking for