My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact. But when I receive a call instead of the proper ringtone, it plays the generic. What Am I not doing right?
My personal ringtones are on my iPhone 5, they are attached to the correct phone numbers and play correctly when I test them on each contact. But when I receive a call instead of the proper ringtone, it plays the generic. What Am I not doing right?
You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.
Similar Messages
-
I have 1 Apple ID, 2 5S iPhones (1 private/1 work) with separates numbers and both phones ring when I get a call on one of the numbers. How do I switch that of ?
I realize that my wife could make her own iTunes account; however, she's been using mine for about 2 years now and this hasn't been an issue. I guess with the Family Sharing she can have access to all of our music and apps now with her own account.
I'll have to see if unchecking our emails resolves this issue. -
is anyone facing same problem please help.
thanksKayla, check the grill that covers the microphone (bottom left next to charging port) and make certain there isn't any dirt, makeup, spilled soda clogging the grill causing it to fail. My sister had a similar issue with her earphone and while I was in the process of replacing it for the third time I decided to check the grill under a very bright light and it was totally clogged up causing her not to be able to hear her phone calls. Use a Q-Tip dipped in hot water and gently wipe the grill. Just barely moisten it, no need to go crazy with the water. Might as well clean the earphone and speaker on the bottom right too. Anyhow, that could be what your issue is and if so it's a really simple fix. If that doesn't help just replace the microphone. It'd cost maybe $5 and ten minutes of your time to do. Good luck, John
-
Wham am I doing wrong? After I plug my iphone into my computer and it syncs, it will not let me open any of my apps. WHen I press them, they just vibrate and won't open. ANy ideas???
Is this the wiggling that you get when you hold down an app? If so, this is by design. When they wiggle, you can move them around. To stop them wiggling, just press the home button. Then you can just tap an app to open it.
(Sorry if this is too elementary for you!) -
Songs are showing up and playing fine in iTunes yet will not sync to my iPad it is a selection of songs by the same artist, all gone?
Try Missing Artist or Album not with others by same artist
tt2 -
I just got the iPhone 5. It's completely synced and working. All my contacts are loaded. However, caller ID is not working when I receive a call or a text. Can anyone help me out with this?
Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?
I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you -
as i upgraded my iphone 4 to ios5 i cant edit my phone list and the i message won't use my phone number, what shall i do
Hi drgpeck,
This article is for a similar issue, and the troubleshooting steps would be recommended for your specific issue:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814
Cheers!
- Ari -
since updating itunes and the software on my iphone 3 I am NO LONGER able to play my videos on the iphone! They're bought videos through itunes that I could play before. Annoying. Can someone please let me know which software *****? iphone/itunes update?
OH and before you say "use the video app" that's what is no longer working..since updating itunes and the software on my iphone 3 I am NO LONGER able to play my videos on the iphone! They're bought videos through itunes that I could play before. Annoying. Can someone please let me know which software *****? iphone/itunes update?
OH and before you say "use the video app" that's what is no longer working.. -
Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
I need help, because i'm enable do download the new update.
ThanksType "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.
-
am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop
Hi K8tym,
Please refer to below article.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thanks -
I have an iphone 6. The ringer remains silent when I receive a call, text or email. It shows I am receiving a call on the screen but there isn't any sound. I cannot figure out what is wrong.
If you've checked the mute switch as razmee209 has suggested and it's not enabled, the next thing to check would be Do Not Disturb. Do you see a small crescent moon in the status bar? Check Settings>Do Not Disturb and turn it off.
-
I am getting a 1015 error on my iphone 3G. i just did update the ios. what happen to my iphone?
SEARCH!!!!
http://lmgtfy.com/?q=iphone+1015+error -
I spilled milk on my IPhone - can see it running under the screen - what to do
I spilled milk on my IPhone - can see it running under the screen - what to do
There's nothing you can do about this other than live with it and hope that it doesn't damage the iPhone (likely that it will). If it does eventually fail, you'll need to take or send your iPhone to Apple and pay for a replacement.
Regards.
Maybe you are looking for
-
I rented a movie on iTunes from my Mac mini but I can't find it anymore.
I was too tired to watch it so I turned off my computer and went to bed. The next morning I wanted to watch the movie but couldn't find it, the movie finished downloading the night before. Any ideas of where it might be?
-
Delta load from ODS to cube failed - Data mismatch
Hi all We have a scenario where the data flow is like R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube. The cube has an additional field called "monthly version" and since it is a history cube , it is supposed to hold data snapshots of the all
-
Could not complete the smart sharpen command because there is not enough memory (RAM)
Hi, I'm trying to complete the AutoSharpen (Filter->Sharpen->AutoSharpen) feature but, i'm getting the following error when i click on "Ok". Error in Dialogue Box "Could not complete the smart sharpen command because there is not enough memory (RAM)"
-
How duplicate ora11 on windows to another host with different directory structure
Hi, I need help. I want to duplicate db (11.2) running on windows from server A to Server B Directory structures on server A and Server B are different; my steps on server A 1.backup database plus archivelog delete input; 2.insert into table t values
-
Hi, App team is facing following error when app user COGNOS_DEV_AUDIT_NEW attempting to connect DB server. [ ERROR ] IPFTEST-006 Logging failed to connect to Database:jdbc:-Oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = fcorap20scan