My phone doesn't ring only vibrates. also speaker phone doesn't work?

My phone doesn't ring, only vibrates, also speakerphone doesn't work. I have checked the settings, any help?

What is the position of the Mute switch on the left side above the volume control rocker? And what is the volume set to?

Similar Messages

  • IPhone 4 doesn't ring, only vibrates, but speakers work.

    My iPhone 4 (AT&T) suddenly won't ring when someone calls or I get a text, it only vibrates. The speakers play music fine, and I can have phone conversations and hear/speak to the other person fine. Also, the alarm clock sounds The mute switch doesn't seem jammed or anything, but when I switch it off, it doesn't show the picture of the bell with the line through it while vibrating to let me know its off. Also, the volume buttons get no response when pressed. Any ideas?

    I had this issue as well but I figured out how to fix this issue by just reading previous responds, here's a way how I got mines to work .....
    1. Go to Settings > Sounds > Ringer and Alerts
    2. Turn off the "Change with Buttons"
    3. Lower all the volume
    4. After the above has been made ... turn up the volume using the buttons on the side of the phone. [Once doing it, you should start hearing your default ringtone]
    5. Once you've started to hear your default ringtone just continue turning up the volume all the way
    6. Finally turn on back the "Change with Buttons"
    Now you can start hearing your lock sounds, dial-pad tone, etc.

  • HT201270 phone will not ring, only vibrate

    phone will not ring... only vibrate and I am missing calls... please help

    There is a switch on the left side of the phone, above the volume buttons. Flipping that will mute/un mute the phone. Also try pressing the volume up key a number of times.

  • Phone will not ring only vibrates.

    My wife has an Iphone4. It is running on IOS 6. I have check the mute button on the side. I have checked the volume level in the settings. I have completed a soft reboot. She also claims the alarm does not have sound, I have not checked that myself. Any other trouble shooting I should try before taking it to an Apple Store?

    Check:

  • Phone not ringing only vibrating

    Hi, my phone is not ringing for incoming calls, messages, emails, alerts or for the alarm.  Only vibrating.  I have checked the mute button, updated all sound settings, turned phone off and on again and reset the phone. Still no go.  Any suggestions?

    Nope, still not fixed just don't know the phone is ringning at all without looking at it.
    And if I try and ring out using the speaker phone option I can't hear the dial/ring tone when calling out.

  • HT201401 My iPhone 4 does not ring only vibrates. I have restored but so luck. All the settings are okay. Ringtones can be heard through the speaker during selection. Please help. Thanks.

    My iPhone 4 does not ring only vibrates. I have restored but no luck. Ringtones can be heard through speaker during selection. Ring volume is also set at maximum.

    I had the same problem. I took the phone to the local tech shop and they replaced a fried headphone flex cable. Cost me $70.

  • HT201401 My phone will not ring or vibrate despite ringer up to max volume

    My phone will not ring or vibrate despite ringer up to max volume & vibrate turned on.  Message tone does sound though when message comes in.  I know the sounds work as I have tested them, they just don't work with incoming calls????

    toggle ringer switch right above the volume up button

  • My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Unlocked iphone wont ring only vibrates help!!

    i recently got a unlocked iphone still works fine but now doesnt ring only vibrates can any one help me??

    We do not help people with unlocked iPhones.
    Make sure the switch on the side is set to ring, go to settings and make sure the sound is up and ring is on and all.
    Other than that try to google a forum that deals with hacks.

  • IPhone 4 - my phone doesn't "ring"...  Speaker plays, it works on vibrate, and when you set the ringer, it will play.  Just not when an incoming call comes in.  Any thoughts?

    iPhone 4 - my phone doesn't "ring".  Speaker plays, it works on vibrate, and when you set the ringer, it will play.  Just not when an incoming call comes in.  Any thoughts?

    Check the position of the mute switch. On the side, just above the volume keys.

  • My phone wont ring only vibrates and people cant hear me on a call

    need help phone will not ring and i can hear the person im talking to but they cant hear me. this happens everytime i download new verion

    Hello benjiblalock
    Check out the article below and look in the Acoustic-speaker/microphone/receiver section to resolve those issues. If it does not work, then check out the links towards the bottom of the article for further assistance.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    -Norm G.

  • HT4528 phone will not ring just vibrate

    phone wil not ring just vibrate

    Hey bandit12345,
    Thanks for the question. Have you checked to see if your Ring/Silent switch may be toggled?:
    Ring/Silent switch - iPhone
    http://help.apple.com/iphone/7/#/iph3bd01398
    Ring/Silent switch
    Flip the Ring/Silent switch to put iPhone in ring mode or silent mode .
    In ring mode, iPhone plays all sounds. In silent mode, iPhone doesn’t ring or play alerts and other sound effects.
    Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent.
    For information about changing sound and vibration settings, see Sounds and silence.
    Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap the Do Not Disturb button . See Do Not Disturb.
    If the above does not resolve your issue, see this article:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Thanks,
    Matt M.

  • HT201401 phone will not ring  it vibrates but does not ring ..volume is up..

    phone will not ring
    volume is up but it only vibrates.

    it didn't work in my phone. Volume is high, no mute, no in don't disturb. I went through the whole setting and found nothing out of place. Games lost sound but itunes music play well.
    Any idea?

  • My iPhone 5 doesnt ring only vibrates.

    So I got an iPhone 5 about 2 weeks ago. A few days ago it stopped ringing. The volume is on and the mute is off. I've checked the settings, bluetooth, all that
    fun stuff but nothing seemed to be wrong. I think this issue started when I started to use headphones. I restored my phone, reset it as well. I got nothing. If I hear the ringtone it works, or any video, there is sound. But when recevieing a call, it just vibrates. Im not sure if this matters as well, if I move the switch to mute or unmute on the side of the iphone no message comes up. Although it is off at the moment.
    If someone will be nice enough to help me that would be great.

    this worked for my Iphone 4
    Go to:
    Settings
    General
    Accesability
    Assistive touch - switch to on.
    using the assistive touch (the white circle that now appears on your screen), go to:
    Device
    Then tap the bell (mute) icon.
    This should fix the issue. To test it (without having to wait for someone to call you) write an SMS and see if the keyboard clicks are audible.
    I hope this solves your issue like it did mine. If it doesn't maybe try tapping that mute icon again and/or flicking the actual mute bottom on the left hand side of your iPhone.
    This solution comes from @17beachside71 on this thread:
    https://discussions.apple.com/thread/3742714?start=0&tstart=0

  • My iphone 5 won't ring, only vibrate

    My iphone 5 won't ring, it only vibrates

    Reset all settings.
    Settings>General>Reset>Reset all settings
    If this doesn't work then I would try restoring the device.
    Make sure you make a valid back up of your device before hand.
    After the restore, set the device up as new. If it doesn't work after that, then your device may need serviced.

Maybe you are looking for

  • CCM and Tomcat 5.5.20

    We have Inxight SDX Admin Server already installed and it has it's own Apache. We installed Tomcat 5.5.20 seperately and BOE XI 3.1. It tried to point to the Inxight Apache and the CCM won't start the Tomcat. How can we repoint the CCM Tomcat to the

  • Mapping help UDF

    hello experts. the standard functions are not working for the number of occurrences. below is the structure. Root 0....unbounded                                                        Root 0 ...unbounded.    events 0...unbounded        countries 1...

  • Bindind data to multidimensional Array

    I have a multidimensional Array (3D). I have some fields which I want to bind to some TextInputs: model.creditosConsumoModel.literaturaCredito[i][j][k] And here's a example of the data binding: text="{(model.creditosConsumoModel.literaturaCredito[4][

  • Can I Manage virtual machines using SCCM? What about Amazon ec2 instances?

    Hi All, As part of my lab environment, I would like to discover and manage virtual machines within ESXi platform and a few on Hyper-V. As part of this,  1] Do we need SC-VMM to create/discover/manage virtual machines or can this be done by using just

  • Problem setting up iDVD opening page after dragging in iMovie project

    Had a problem at one to one training yesterday to finish my project. I had completed my slide show with photos and video in imovie. I had premade the "opening" on iDVD with a title and subtitle. When we dragged the imovie file into the idvd opening p