My phone goes right to voicemail, does not ring?
My phone does not ring and goes straight to voicemail
Have you tried a hard reset? You can also try a backup and restore in iTunes.
If you have tried all of the above, have good reception and are still experiencing this problem, as razmee209 suggested, it may be time to call your carrier.
Similar Messages
-
My phone goes right to voicemail instead of ringing?
I don't understand why this happens. Every other function works fine. Does anyone know what to do.
Settings > Do Not Disturb = "Off"
-
Ever since I did the most recent update (7.0.4) I will all of the sudden have a voicemail and I have not been on the phone. Also, people are telling me they call me and it goes right to voicemail. I have call waiting so this makes no sense. I use this for my business so I can't have this issue
Sorry, that is also not true. I have 4 bars and still receive emails and texts. I contacted them and there is no issue with my service. Also, until I did the most recent update, everything worked fine. But good suggestion
-
Phone goes right to voice mail without ringing
I have noticed recently that my phone goes right to voice mail when i call my home number from my cell phone. I noticed also when i am home and get a call it won't let me answer it
Any ideas? Thanks in advanceToyotaEd wrote:
I have noticed recently that my phone goes right to voice mail when i call my home number from my cell phone. I noticed also when i am home and get a call it won't let me answer it
Any ideas? Thanks in advanceTry rebooting the EMTA device.... pull power, let sit 10 seconds, plug back in.... allow the device to reacquire signal and reinitialize...this can take up to 5 minutes.... once all of the lights are lit solid, try an inbound call again to see if this fixed it.... If it did not, you may need to call Comcast and register a trouble ticket for your affected services. -
Phone can dial out but does not ring on incoming calls
We have a strange problem with a 7961G phone. It's configured the same as all of our other phones in CMM, but it can dial out but when dialing in the phone does not ring nor does the call appear to be routed to the phone. I called out from the phone to my cell and it displays the correct Caller ID information. Any ideas???
I would check the partition that the DN on the called phone is in and the CSS of the calling phone. These are the two fundamental principles that control when a phone can call another phone.
You might want to change the partition of the called DN to momentarily, to see that the calling phone can call it. All phones can call the partition unless there are explicit blocks put in place. -
Shared line sometimes does not ring on some phones
I'm having a strange issue that appeared a couple of weeks ago. I have not made any upgrades since October so I don't think that's the issue. I'm running CUCM 8.5.1.15900-4.
The issue is that one of my phone's shared line appearance does not ring while the others are ringing. It seems like that phone is omitted from the broadcast sometimes. This doesn't happen all the time. Most of the time, all the phones with the shared line appearance will ring. I'm not sure if it is only happening on this phone. It is very hard to reproduce.
Has anyone had this issue? What are some debugs I can collect to show what physical phones CUCM is ringing when the calls are coming in. I want to confirm that it is omitting that particular phone.
VinceHi Jeff,
I never went as far as to open a TAC case.
Most things I tried have corrected the issue temporarily (resetting the DN in CUCM, resetting the phones, upgrading firmware). I acutally upgraded CUCM from 8.6 to 9.1.2 just under a year ago and haven't had the "ringing" issue on the shared line since then. Not entirely sure if that was the reason though.
Since that upgrade I have other issues with this same shared line, most notably held calls not showing up on all the phones at intermittent times. 9 times out of 10 resetting the DN corrects this for about 6 months. That other 1 time, a reset via CUCM doesn't actually reset the phone and I either have to physically unplug power from the phone or do a shut/no shut on the switchport (effectively power cycling the phone).
I've created a job under bulk administration that resets the phones once a week (during closed hours). My thinking was these phones are like computers and need to be rebooted every now and again.... -
I have an iPhone 4. When someone tries to call me, the phone sometimes(most of the time now) does not ring. It will roll over to voicemail but does not show a missed call. Has anyone had this same thing happen and how did you get it rectified?
My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks -
I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.
-
I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?
Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.
-
Macbook goes to sleep but does not wake-up
Hello, my Macbook is 3 years old and I am now having trouble with it. Whenever it goes to sleep, it does not wake up. This includes if I close the screen and then when reopening, it will not come back on. I am on version 10.4.11
Below is the power settings on the machine in case it is something to do with the battery/power source.
Thankyou so much if anyone could help fix the problem or point me in the right direction to resolving the issue.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 180
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 180
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 180
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 180
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: No
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 4990
Remaining Capacity (mAh): 4980
Amperage (mA): -1112
Voltage (mV): 12389
Cycle Count: 231
AC Charger Information:
Connected: Yes
Charging: No
Hardware Configuration:
UPS Installed: NoHmm... I've had this macbook for a while now (?? a year maybe ??) and about 2 months ago I started having this exact issue, close lid to sleep returning it would not wake and a hard reset (hold power for 5+ seconds) is required.
I too discovered such links as this and also the older (also unanswered):
http://discussions.info.apple.com/message.jspa?messageID=8690782
But as others have said there doesn't appear to be a solution?
RESET THE SMC (http://support.apple.com/kb/HT3964) does appear to work, however the issue returns again after a few days or weeks... I cannot find anything that guarantees to return the issue it just starts happening again after a while.
The battery appears to be in okay condition, although I think it might run down a little faster now days than when I first bought it, but I assume this is to be expected.
I also had suffered from what sounds like an issue with wifi weirdness - signal would drop to 0% suddenly, no longer "see" the wifi hub that it has been using forever (although it still, randomly, sees other nearby hubs) for no apparent reason, and that kind of thing - all these times the only solutions that have worked have been to stuff around with the wifi hub turing off extas, flipping from "Auto" to a specific Number (1 to 13) and turning on (OR OFF!) Mixed B/G to just B OR G... very strange... and random.
The only things I've changed recently are, upgraded to snow leopard (from leopard) and got an external display. But I cannot say if the incidents coincided or not, as I didn't realise the sleep/wake issue was an issue for a while, as the first few times I just thougth "Oh, something weirds happened... Reset..." and didnt' really think too much about it until it happened for the 3rd or 4th time and I could see there was a pattern...
The external monitor via minidisplay port adaptor i got from teh apple store.
I don't use it with the machine closed or external keyboard/mouse, although I've heard you can do this, I use the monitor as a secondary display when I'm at the desk, the rest of the time I just use it as I have always done.
I would love to see a solution to this, I guess I could try warranty, but I dunno if the issue is warranty "level"...?
Message was edited by: smerlon
Message was edited by: smerlon -
Phone does not ring when unknwon number calls
Please help. This has only just starting happening.
If a phone call is received from a number not in my conatcts list, the phone does not ring.
Any ideas anyone.
Thanks Rich.
Solved!
Go to Solution.It may happen that profile exception is active.
To check this go to Profiles -> Advanced -> Uncheck all check box under User Active Profile Except fo:
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
Phone does not ring when I get calls
My phone does not ring when I receive incoming calls since I upgraded software to IOS 7.
I tried that just now and it doesn't seem to have fixed it--but it is not a constant problem--just sometimes! I received a call from a friend when do not disturb was turned off but also when it was on! That was really strange!
Now I am trying to figure out why my camera flash won't work!!
Yikes crazy stuff going on with my phone since I updated the software!. -
I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?
What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-( -
Send to bluetooth right click option DOES NOT WORK
hi guys can you help me send to bluetooth right click option does not work!when i am going to send something it says windows cannot access the specified device,path or file you may not have the appropriate permissions to access the item please help me!i
have windows 8this is how we send file using Bluetooth
http://superuser.com/questions/540498/open-bluetooth-file-transfer-wizard-in-windows-8
Did you pair this 2 device before?
May I know the destination device? its comes with WIFI?
tips: rather than Bluetooth, I suggest you using file sharing with WIFI, its more faster
Maybe you are looking for
-
I am trying to reinstall Snow Leopard on my iMac (Spring '08)...
I am trying to reinstall Snow Leopard on my iMac (Spring '08) and part way through the install my screen shuts off and does nothing but my computer is still running. I've turned it off, unplugged it and let it sit for about 10 minutes. I turn it back
-
I recently downloaded Mlountain Lion on my Imac. It shows that I have an update for Evernote that should be downloaded, but I cannot find out how to complete this update. It asks for me to sign in with my email address, but does not show how to do th
-
DEAR FRIENDS, I run a sales analysis report customer wise using T-CODE MCE, for all other customers the report came out properly except for the customers in other plants and distribution channels which were just created. Pls is there anything missing
-
Airplay,Ipad not possible to stream in English (Only German)
I am exoeriencing the following issue: When streaming from Ipad, Iphone or Mac Pro to the Apple TV (Gen2) it is not possible to listen to a dual soundtrack film (German/English) in any other language than German. It is possible to select and listen t
-
Test program in manufacturing environment
I'm designing a program to be used in a manufacturing facility. The ultimate goal is for a user to: 1) select a part number that has specific parameters to be verified (resistance, flow, leak), 2) tested several parts of the selected type and then 3