My phone has been working just fine, and today it says 'restore needed, iphone cannot make or receive phone calls. restore from itunes.' How do I do this? I have tried everything! Thanks
HELP
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Similar Messages
-
It was working properly for 9 months then suddenly it started showing me this error.
Resolve iOS update and restore errors - Apple Support
-
Okay my phone was working just fine and I went to unlock it and it wont show the lock screen it just remains black please if anyone can help me fix it it will be much appreciated, I am very careful with my phone so I dont know why its acting like this.
I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.
-
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
My Apple TV willl no longer access my "owner's library" in iTunes. It had been working just fine... then nothing. I've been checking discussions, and trying suggestions, but nothing seems to work.
Have you restarted everything including your router?
Don't suppose you've added any new security software or firewalls to the computer? -
My nano was working just fine and I had been using it as my fitness watch ( music). I plugged it in to charge and when I came back to unplug it, it was so hot that it burned my hands. I continued to unplug it and that was the last time it worked.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I get the following error message: Gone The requested resource / is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC) -
iTunes 11 freezes and can't eject my iPod, so I need to disconnect the cable, then iTunes works just fine and my iPod Shuffle is in restoring mode. I've been having this issue for weeks, and never had it before with iTunes 10. Please tell me at least a way to eject it without losing all my data and being forced to format/restore the iPod. I've got 2GB iPod Shuffle 2nd generation(:D)
As a test, shut down (power off) your computer and disconnect all USB devices including hub (except for standard keyboard and mouse if normally used). If your computer is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/HT1655
Start up the computer, run iTunes, and connect the shuffle to a direct USB port on the computer. Does this problem recur when the shuffle is the only USB device?
If it does (as another test), select the shuffle in iTunes, so that its Settings screen is showing. Check the box for Enable disk use, and Apply. Does that make any difference regarding this problem? -
My iPad 2 (ios 7) has been working perfectly fine for years. All of a sudden it's stopped connecting to my home wifi. The password is not recognised, even though it is the right password. I've tired the reboots and forget network etc. The renew lease option is not there, maybe because I reset all network settings. It's just puzzling. I haven't changed anything; my HP laptop is fine. Why would my ipad suddenly do this? is it just an ios7 glitch that apple haven't addressed yet?
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/ -
My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now.
My daughter also has an iPad and an iPhone and these too won't connect either (use the same iTunes account)
Nothing has changed since this morning, I've gone through all of Apples suggested troubleshooting guides but it still won't work!
Help?p.s. I just signed out of my apple id on daughters iPad and tried to create a new apple ID and still got the message CANNOT CONNECT TO ITUNES STORE......
so is this a problem with apple rather than my devices? Just seems weird that all our apple devices are doing this this afternoon when they were just fine this morning.......
P.P.S Just got a text from a friend with iphone and ipad......they are having same issue so at least I know it's not just me, so what's going on here APPLE????? -
I have an ipod touch 4g it was just Fine and today i tried to plug it to my laptop to sync music and it suddenly turned off and it didn't work for 15 mins and then it worked but i can no longer sync apps or music plz help me as soon as you can
If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?
If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.
-
My iPhone cannot make or receive calls. I tried installing iTunes order to sync everything and restore, but I am getting 0x ... 084 errors, and it won't work. I do not want to delete all of my contacts. Any advice would be appreciated.
Oh, and I can't hook up my iPhone to iTunes because it's locked with a passcode. I can't begin to type the passcode because of this stupid "Restore Needed - can't send or receive calls" thing. This is beyond silly.
-
I have clicked in the App Store icon and when I have attempted to download there is an error message. Saying I need to connect to the UK store, not the US store, how do I do this?
Switching an iTunes Store account to a different country
http://www.ilounge.com/index.php/articles/comments/switching-an-itunes-store-acc ount-to-a-different-country/
Cheers, Tom -
I have a problem in the iPhone 4 is an inability to make or receive calls, and must restore the information from iTunes, how do I do this and what is the way?
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Maybe you are looking for
-
Unable to update to Mountain Lion 10.8.1 from 10.8 (NSURLErrorDomain)
I've been trying to update to Montain Lion 10.8.1 from 10.8 via the Mac App Store since it's release. Unfortunately after the bundle is downloaded I keep receiving the following error: The operation couldn't be completed. (NSURLErrorDomain error -110
-
Brrestore bus error when restore BW Production data
Hi, I'm trying the restore BW Production data into our QA BW server, but in brrestore it ended with error: bus error (core dumped): BR280I Time stamp 2007-02-21 23.54.48 #FILE..... /oracle/WR1/sapdata1/wr1_25/wr1.data25 #RESTORED. WR1___A0EYES6A0Y Bu
-
Auto Recharge not working, can't buy credit - Dumps me to front page when "Buy" is clicked
I already contacted Customer Service (if you can call it that) on the Chat link. They couldn't fix the problem and said they have to escalate it, and I still haven't heard back. The problem is that auto-recharge isn't working, and really never has. I
-
Hi, my computer(WIN8) always crashes randomly and when I open the dmp it says it is cause by ntoskrnl.exe here are the the DMP files https://drive.google.com/file/d/0B3kqCRTWiaxKNEZJMWx4elVUUzg/edit?usp=sharing
-
In 2009 my office purchased different CS4 products, but we dont have the serial number because the employee who registered the license left the organization, can you please help us?