My phone is constantly loading?

i have recently sent my iphone off for repair they sent me a brand new one back i later plugged my phone into my friends itunes to set it up as they did not do it in the store for me. later on i then plugged it into my on laptop to update it as it started to update it it tried to restore all my old phones back up onto my new phone after failing to do soo my phone was showing named iphone and all seriel number and everything came up n/a and now its not picking up my phone at all and to top it off my phone is constantly got the screen with either the apple sign with the load bar underneath it or the load screen with the litlle circle that goes round and round why has it done this and how do i fix it ????????????? i need my phone

I was having the same problem. Did a hard reboot (hold power and home buttons both down until the phone shuts off).
That did the trick.
Hope that helps.

Similar Messages

  • I phone 4s ... Unable to use 3G .. And personal hotspot is constantly loading? Any advice?

    Unable to use 3G .. And personal hotspot is constantly loading? Any advice

    see
    http://www.netchimp.co.uk/webdesign/iphone-ipad-ipod-touch-tips/iphone-unable-to -move-message-to-trash-imap/

  • Voicemail constantly loads, and I can not stop it. Help!

    I have an LG phone, and the voicemail constantly loads.  I have tried to stop the program with no results. What next??

    Which LG phone?  And is this the Visual Voicemail app, or the standard Verizon voicemail?  I'm not sure what you mean by loading constantly?  Do you have voicemails waiting?  Can you call in to your voicemail?

  • My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • I have a 16GB 3GS phone. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it.

    I have a 16GB 3GS phone since about20 months now. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it. I always used standard headphones and charging cable. Now when i recall, it started at one of the sync sessions with my itunes. I have turned my phone off and aon again and again but the message keeps coming every one or two minutes.I have also started loosing voicce on different applications like youtube etc. Also the ringer volume up and down key does not show me the small boxes increasing or decreasing on screen. The phone is playing crazy. Can someone help please
    Thanks
    Zia

    It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
    Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
    Please help

  • My I phone was down loading the latest update to O S 7.o and it froze showing an I tunes icon and the wire connection to the charger. My phone is not working now.

    My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
    I can't use the phone now its frozen in this screen.

    Hello, Indy car fan. 
    Thank you for visiting Apple Support Communities.
    When experiencing issues restoring or updating an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but it didn't load at all, not even after 3 hours.. so i tried to disconnect to phone, but the loading meter is still there, like it has frozen, what should I do ?

    I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
    so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?

    Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.

  • TS3322 I synced my photos with icloud from my phone and it loaded all my photos from my computer to my phone I wanted to copy from phone to computer

    I synced my photos with icloud from my phone and it loaded all my photos from my computer to my phone I wanted to copy from phone to computer

    Hello Crosso10
    As long as you have iCloud Control Panel installed on your computer, they should show up in your Pictures folder under My Photo Stream.
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    Regards,
    -Norm G.

  • HT4623 I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    I have an iPhone 4s and I attempted to update my device's iOS to 7.0.2. The download was successful but when I tried to install the software, it asked me to connect my device to iTunes. I did but my phone failed to load: ERROR 4013. What to do?

    Hi there KrisonCastillo,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • My 4S phone will not load itunes

    My phone will not load itunes, just spins on blank page. Any suggestions?

    Hello Toniamato,
    It sounds like your phone is not charging or charging very slowly. I would use these troubleshooting steps from the following article:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • CM Phones with Mismatched Load

    I recently upgraded the firmware of our 7941 phones to SCCP41.9-3-1SR4-1S. Then I found out about the headset bug (https://supportforums.cisco.com/discussion/12264606/issue-headset-ip-phone-7962) so I have to rollback to SCCP41.9-3-1SR3-1S. The Device Defaults Configuration is set to SCCP41.9-3-1SR3-1S for our 7941s and I've verified that this is the phones' current active load. However, when I go to generate a "Unified CM Phones With Mismatched Load" report, it tells me all my 7941s are mismatched. That their LoadID is SCCP41.9-3-1SR4-1S and their ActiveLoadID is SCCP41.9-3-1SR3-1S. I thought that since I have SCCP41.9-3-1SR3-1S set as the Device Default Load for 7941s, I shouldn't have any mismatch at all. What am I missing? What do I need to do to resolve the mismatches?
    Thank you very much for your time,
    Randy

    Hi @rhandellecalderon,
    I have two ideas:
    Remove the new load (SCCP41.9-3-1SR4-1S) from CUCM
    Make a factory default to the 7941s (or try with one of them first)
    HTH.
    Rgrds,
    Martin, IT Specialist

  • Just upgraded to 2.1 and phone is constantly rebooting

    Hi all,
    I just updated to 2.1 and my phone is constantly rebooting (8 times in the last 5 minutes). Is this just me, or is anyone else seeing this?
    I am currently in a building with very poor phone service, so that may be related (it just reboot for the 9th time).
    Kirk

    my phone is doing this as well...frustrating...

  • HT201317 Just synched iphone4s to new iphone6.  Majority of photos in iCloud still show on old phone (4s).  i6 phone is not loading most of them from iCloud.  Why?

    Hi, I just synched my iphone4s to new iphone6.  Majority of photos in iCloud still show on old phone (4s).  i6 phone is not loading most of them from iCloud. Any idea why?

    You cannot do anything to effect the Photo Stream except delete photos. Photo Stream automatically loads photos that you take as you take them into the Photo Stream. It then removes anything over 30 days old automatically.
    Cheers,
    GB

  • Desktop constantly loading?

    Thanks for taking the time to read.
    A few weeks ago my macbook pro's desktop stopped responding. The cursor is in the loading stage whenever I hover it over the desktop, but I can use my browser and anything else in my dock just fine. (No loading icon in the browser or other programs) This is very inconvenient when I'd like to use programs not on my dock, etc. On top of that I believe this problem is also affecting my ability to download new programs. When the program I'm trying to download reached the "finishing" stage it constantly loads.
    I've tried restarting.
    I tried going into safe mode and then going back out of safe mode.
    Any help would be very appreciated. Thank you very much.

    Double-click on the hard drive icon in the Finder. It should tell you how much room is available.

  • Blackberry seems to be constantly loading something...

    This may sound weird...
    But I have the blackberry curve 8520. And lately my phone seems to be loading something, I have the mini clock thing appear all the time. And it's just there for what feels like ages..
    Anyway, I have absolutely NO IDEA what it's loading as I have no applications open. I just have to unlock the phone, and the loading clock appears.
    Does anyone know what I can do to stop this as it's getting annoying. It takes 10 minutes to send a text message, which is frustratingly slow.
    It also seems to drain the battery power. Which adds to my frustration.
    And before anyone suggests to reboot my phone from new.. I done that on Dec 1st. And it hasn't helped.

    This may sound weird...
    But I have the blackberry curve 8520. And lately my phone seems to be loading something, I have the mini clock thing appear all the time. And it's just there for what feels like ages..
    Anyway, I have absolutely NO IDEA what it's loading as I have no applications open. I just have to unlock the phone, and the loading clock appears.
    Does anyone know what I can do to stop this as it's getting annoying. It takes 10 minutes to send a text message, which is frustratingly slow.
    It also seems to drain the battery power. Which adds to my frustration.
    And before anyone suggests to reboot my phone from new.. I done that on Dec 1st. And it hasn't helped.

Maybe you are looking for

  • Windows Experience Index

    My base score is 7.9 ,My video card is updated, my monitor resolution is 1024x768 ,I run Windows 7 Ultimate,I've chosen an Aero theme, I ain't  running Safe Mode.Why I can't run Aero

  • Reg: internal table?

    hello friends? i have one basic doubts, please clear this things, what are all the ways we can create the internal table? how we create internal table using data statement? how we create internal table using types statement? what is the difference be

  • Printer not holding it's PCL settting "Raw character printing"

    I have some older HP printers where I can send PCL commands to the printers (font, size,orientation, etc.) using a program in Unix,. I can send multiple jobs to that printer and it holds the setting sent to the printer until I send the default PCL se

  • SAP HCM Application Support.

    Hi Everyone, Scenario 1: To provide SAP application Support Service What are the questions we need to ask the client to get the info? Scenario 2: To Provide an application Support for SAP HCM. What questions we need to ask the client? Could you pleas

  • GREP to Find Numbers at End of Story

    I want use GREP to do a find to locate any six digit number or just the numeral zero at the end of each story in my InDesign 4 documents. So far, I have ben able io identify six digit numbers by searching for the following \d{6} But when I add the en