My phone is disabled and wont connect to itunes haven't had
My twin daughters have disabled my phone before and I would just wait out the 5-60 minutes, however now my phone sayd IPhone is desabled connect to itunes. I never updated my phone when I recieved the 5. It wont even recognive the phone and it is my only phone and I cannot get anyone from apple to call me back without the IME number which I cant get thanks to not being able to turn on my phone. PLEASE HELP!!!
If you never backed it up, then you will have to try recovery or DFU mode and restore it as a new device. There is no way around it. If it was not backed up, everything on the phone will be lost.
Similar Messages
-
My phone is disabled and wont connect to itunes
my phone is disabled due to it recently being fixed and i was told to plug it into itunes and everything should be fine. Except itunes or my phone isnt picking up, the itunes will open a little box that says "please respond on iphone" but then nothing changes on my iphones screen. It still says iphone disabled and only lets me slide for emergency calls. WHAT DO I DO PLS HELP
If you never backed it up, then you will have to try recovery or DFU mode and restore it as a new device. There is no way around it. If it was not backed up, everything on the phone will be lost.
-
My phone is disabled and says connect to iphones but havnt had iphones setup
my phone is disabled and says connect to iphones but havnt had iphones for phone dont know what to do
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore -
I changed my 4 digit password to lock the screen and forgot what I changed it to. Now phone is disabled and says connect to itunes. Has this ever happened to anybody? How can I fix this? I share my phone bill with my mom and my itunes account with my husband? I have all the apple ID's if needed
http://support.apple.com/kb/HT1808
-
my phone is disabled and says connect to itunes but i want to recover my data's and pictures before restoring it with itunes.
You may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
If you haven't synced it to that computer before then you won't have a backup on it to restore your content from. Do you have any of your content on it for re-sycning and/or have you been backing up to the cloud ?
You can re-download your apps (if they are still in the store) via the Purchased tab in the App Store app, and you may be able to re-download music, films and tv shows via the Purchased tab in the iTunes store app. -
please help my iphone 4s is disabled and i cant connect to itunes
Hi, icaruss96.
Thank you for visiting Apple Support Communities.
Thank you for visiting Apple Support Communities.
If your iOS device is disabled, here is an article that I would recommend going through.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
My friend took my ipod touch and did the password now its disabled and wont connect to computer?
my friend took my ipod touch and did the password now its disabled and wont connect to computer?
Colton,
You'll need to connect your iPod to your iTunes library in Recovery Mode and restore it using the instructions in this Apple support document.
http://support.apple.com/kb/HT1808
B-rock -
Ineed help fixing my iphone it is disabled and says connect to itunes..i downloaded itunes on my labtop to do so but dont know the steps to take after i down load itunes and connect to itunes from my labtop
Did you connect it to iTunes? What happened?
-
How can I restore my iphone if its disabled and says connect to itune?
Last week i changed my password and i forgot it. i tried to remember it and tried to type all the numbers comes out in my mind and it got my phone disabled and says connect to itunes. My iphone haven't sync yet on any devices.What should i do ? Help?
The following has instructions. Note that it has a section for cases where the phone has never been synced. http://support.apple.com/kb/ht1212
-
My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.
How did the passcode get on the phone to begin with, if you "only got it yesterday"? Regardless, to remove it, you'll have to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
This will remove the passcode. -
4s is disabled and says "connect to itunes" is there ANY way to get the data off??
in a nutshell ...
1. i had a 4S
2. screen broke
3. bought new 5c
4. BUT sprint couldnt transfer data from 4S b/c i couldnt swipe my passcode in b/c screen was broken
5. i was annoyed b/c i had photos/videos/notes that i wanted
6. only contacts were on cloud
7. fast forward 3 months, my very thoughtful girlfriend got my screen repaired
8. ONLY i couldnt remember the passcode!!!! after like a ton of tries my iphone is disabled and says connect to itunes
9. i have never synced w/itunes but tried anyway
10. i tunes said couldnt read data b/c phone was locked; enter passcode!!! but DUH i cant enter it b/c it's disabled
11. i fear the only thing i can do is restore, which i believe erases all data ...
is there anyway to put my sim card in an iphone 4 to get the pictures (mainly) off? or like an adapter to read SIM from a laptop? or sprint store??
thanks!!Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipod is disabled and says connect to itunes but when i connect it dosent let me connect cuz it says it has a passcode so i can get it out of disabled mode what can i do
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
HT1212 how to unlock ipod touch when disabled and says connect to itunes
how to unlock ipod touch when disabled and says connect to itunes?
The answer is in the article you asked this question from: http://support.apple.com/kb/HT1212
-
my IPod is disabled and says connect to iTunes but when I plug it in it says I need a password. I would put it in recovery mode but my home button doesn't work. any suggestions?
Use the method listed in this previous discussion for placing the iPod in Recovery mode without buttons
Turn on without Home/Power Button -
HT1430 my ipod id disabled and says connect to itunes how do i get ipod working again
My ipod is disabled and says connect to itunes, i can't seem to get it working, help!!!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
MIRO still Payment Block after Release
Dear Experts, I got a trouble with invoice process. We are using workflow to release payment block, so that the status of the MIRO can be changed from "P Payment Request" to "Free for Payment". The problem is the status cannot be changed to "Free for
-
Flash file, clicks not working in one environment
Hi everyone, I have produced files using Captivate 2, that have output as .exe. These work perfectly across all of our sites, except one. The only issue with the site where the files are not working is: - Click box within the Flash file do not progre
-
SQL Select with comma separated column value
Hi All ASP VBScript I have a DB column named allowed_contracts that stores a comma separated list of of values e.g. 3, 5, 19, 44, 52 I need to select records based on a variable called varContractList that contains another comma separated list i.e. 5
-
UserExit in ME_CREATE_REQUISITION_EXT
Hi Experts, There is a user exit in function module ME_CREATE_REQUISITION_EXT that can be enhanced. The code here: Call Customer-Function '001'. Exporting neban = eban Importing number = eban-banfn range = hnrran Exceptions exit_er
-
How can I use the Intelligent Instrumentation PCI 20001C card with DIAdem 6
I need to update my DIAdem Version 4.00 to 6.02. But there is no driver for my measuring card Intelligent Instrumentation PC20001C that i used with DIAdem 4.00. What do I need to do?