My phone is dissabled and i dnt syc to the comp b4 how can i repair it
my phone is dissabled and i dnt syc to the comp b4 how can i repair it
Hey korodi,
Thanks for the question. The following article provides some solutions if your iPhone displays a "Disabled" message, and you have never synced with a computer:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.
Similar Messages
-
HT4061 hey my phone been stolen and I don't know the IMEL number how can I get it?
hey my phone been stolen and I don't know the IMEL number how can I get it?
from your carrier would be a start.
-
I bought a book on ibook, read 13 chapters...and then it dissapeared from my phone. The bookshelf is completely empty and won't load. Tried to sync my phone through itunes and it won't sync the book. How do I fix this?
Sorry, I meant the letters look "faded" not faed.
-
i have bought my Iphone 4s from USA and right now i am in India. How can i repair my phone in INDIA. when i contacted the image store they said, they will not repair it. friends can you suggest any possible solution
Because an iPhone warranty is only good in the country of purchase. You will have to take it back to the USA or send it to someone there to have them take it to an Apple store.
-
I cannot play some songs on itunes, I get a prompt for an old email address which no longer exists and I don't remember the password. How can I get these tunes transferred to my new email address and password?
In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
Thanks for your help. -
my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.
Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.
-
Hi, I downloaded get tube from google on my i mac and now want to delete the app completely, how can I do so?
Get AppZapper, a free program that removes apps. Make sure everything has been removed by checking with Spotlight once the app has been zapped.
-
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........
<Personal Information Edited by Host>RichardRicardo wrote:
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
Sorry... But... The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.
There is No Workaroud for Activation Lock. -
Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.
The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/ -
I have an interactive CD-Rom as part of my Italian language text, and have loaded it onto the iMac. How can I also copy it to the iPad?
You can only install apps from the iTunes app store on your computer and the App Store app directly on the iPad. Does the maker of the CD have an app in the store with the CD contents already in it ?
-
I have an ipod 4 touch with a broken power button and Im locked out of the ipod. How can I reset the ipod? Please help!
I also don't know the operating system.See the method in my reply in this discussion for how to place the iPod in Recovery mode w/o buttons
Turn on without Home/Power Button -
i am receiving the data through the rs232 in labview and i have to store the data in to the word or text file only if there is a change in the data. I have to scan the data continuasly. how can i do that. I was able to store the data into the text or word file but could not be able to do it. I am gettting the data from rs232 interms of 0 or 1. and i have to print it only if thereis a change in data from 0 to 1. if i use if-loop , each as much time there is 0 or 1 is there that much time the data gets printed. i dont know how to do this program please help me if anybody knows the answer
I have attatched the vi. Here in this it receives the data from rs232 as string and converted into binery. and indicated in led also normally if the data 1 comes then the led's will be off. suppose if 0 comes the corresponding data status is wrtten into the text file. But here the problem is the same data will be printed many number of times. so i have to make it like if there is a transition from 1 to o then only print it once. how to do it. I am doing this from few weeks please reply if you know the answer immediatly
thanking you
Attachments:
MOTORTESTJIG.vi 729 KB -
i have an older flip phone (CDM8945 DIG ) and somehow it is locked for outgoing calls? how can i unlock it? lost the original manuel. thanks,
LOCK
Locks your phone and prevents unauthorized use.
Phone can only be used after inputting the password.
1. To lock the phone, press and hold
2. To unlock the phone, press (phone button)
then input the password.
Lock feature will deactivate when the phone is
powered off. Upon next power up, you will need to
press
to lock phone again.
The default password is the last 4 digits of your
phone number
See this link for text with pictures of buttons included:
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html?page=16#manual
Here is a link to the whole manual (model 8940 but close enough)
http://www.manualslib.com/manual/12151/Audiovox-Cdm8940.html -
I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?
Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test.
Maybe you are looking for
-
Hello Experts, I need a mechanism by which i am able to track for a specific error while creating delivery from sales order . Error : Message class : VL Message Number : 367 so is there any table which hold those error , how t
-
My ipod classic 160GB won't connect to my car
Hi, my IPod classic 160gb will not let my car access tunes & play them. It's not the lead because a friends works fine. and my software says it's up to date can anyone help - I miss my music . Thank you.
-
HTTP Server Doesn't Start after install
I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *
-
Production database version 10.1.0.3 to 10.2
We are planning to upgrade the production database version 10.1.0.3 to 10.2 version. Please provide the link to download the any standard document related to upgrade the oracle version 10.1.0.3 to 10.2.
-
Best practices for PAL and HANA Modeling
Hi all I wanted to get your opinion on working with Predictive Analysis Library and SAP HANA modeling- analytical views, calculated views, etc. If I have transactional data modelled into analytical view and now wish to run a predictive function on so