My phone is in plane mode and its says "disabled connect to iTunes"
How can I turn off the plane mode?
I can't connect to the iTunes, when I try to get in iTunes my phone stills with the blue circle and the charger icon.
Please Help
Airplane mode is not relevant. You do not have to use the find my phone app. The answer was given in your previous post - you need a computer running iTunes and follow the directions in iOS: Forgot passcode or device disabled
The section you need is "Use Recovery Mode" - do exactly what it says there. It WILL wipe all data from the phone, sorry to say.
Similar Messages
-
my Iphone 4S is stuck in DFU mode and its not responding connected to Itunes for a restore. I keep getting a 3194 error and 9006. Can any one Help?
What type of jailbreak was used on it?
-
i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
how do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
i have disable my iphone 5 and now its say on my iphone that iphone is disabled connect to itunes and i have tried apple support on how to connect to itunes and it still doesnt work i need help a.s.a.p
Read the article you linked. It tells you how to put it in recover mode
-
Hi I need help on iphone I forgott my pasword I disable it I only have an account with icloud only please help me
I'm not sure what you mean by "iTunes is not enabled" -- if you read the above link, the question is whether you've previously synced with the iTunes application on a computer. If you have, you connect to iTunes on that computer. If not, you follow the "Use Recovery Mode" procedure near the bottom of http://support.apple.com/kb/ht1212
-
I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac? I will go to court over this to prove it is my phone. I just can't lose this information. Please, Please, Please, help me. I will mail the phone in to apple store if that will help.
LeslieKyderbylove wrote:
I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac?
You can't. If your phone is disabled, the data has already been erased...that's the whole point of the passcode. Your only option now is:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. -
hi, i had to restore my ipod 5G and it says its in recovery mode and its saying ipod software downloading but when its done it says it timed out i tried like 5 times what should i do
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
HT1766 what do i do when my phone is locked and it says to connect to itunes?
what do i do when my phone is locked and it says to connect to itunes?
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have to restore my iphone 4s becasue it is saying "disabled connect to itunes" and it's never been synced with itunes. However the sleep/wake button is broken on the phone is there still away to restore without using it?
You can try, but the problem with that is you need battery power in order to restore. Once your phone has enough power to restore, it will still show the same message. To get the phone into either recovery mode or DFU mode requires the ability to first turn the phone off. But, you've got nothing to lose, so you might as well give it a shot.
-
I verified my email but ipod touch says not verified, I go to redo and its says already verified but Itunes still shows it needs to be verified. I was in the process of creating a new Apple ID for my touch.
Please go to Settings>Itunes and App Store and log out of your Apple id and right back in again. See if this doesn't resolve this issue.
-
HT1689 My phone was locked and it says to connect to iTunes
My phone was locked and it says to connect to iTunes, what do I do to restore my iPhone and unlock it
Restore the iphone
iPhone User Guide (For iOS 6 Software) -
My iPad is disabled and it says to connect to ITunes with my Mac. It still is not working.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
IPod says "disabled connect to itunes"... wrong pass code from my 10 year old. I put to recovery mode and 10 minutes into restore it tells me to put the pass word in but the iPod is still locked... help I can't put the pass code in and I can't recover.... He feel awful!
https://discussions.apple.com/message/16719363#16719363
-
Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot
iOS: Forgotten passcode or device disabled after entering wrong passcode
Maybe you are looking for
-
User of Checkbox/ Radio Selections.doc
User of Checkbox/ Radio Selections.doc Thank you, this is very informative and helpful. In the doc you mentioned about a cfm file, however I was not able to see the file. Will you be able to explain a bit about it?
-
Apache and webLogic Communication
Hi we are deploying new application and client want to have Apache on one server and weblogic on another server. Can you pls point to any notes/docs which tells how to configure Apache to have as fronend for applications in weblogic. Thanks Sree
-
Alternative UM in PO's: Inforecord vs Material Master
Hello everybody I would like any help about this scenario: STEP 1 - Material "MAT1" was created with UMB in TN's and with an alternative UM as follows: 1000 M3 = 1500 TN STEP 2 - A PO was created with Material "MAT1" with Order Unit in M3, so an Info
-
PerformancePoint Services Filter in Sharepoint 2013
Hi, In Sharepoint 2010, I could configure all the performancepoint webparts to use the connection of a performancepoint filter, so I didn't have to create a Dashboard object in Dashboard Designer and link the connections there. In Sharepoint 2013 I d
-
Hi, How to check if my services in R12 are running ? I want to check these from the unix command line Say for example in 11i we used to do ps -ef | grep fnd Does those command holds good in R12 as well. Message was edited by: user551201