My phone is not accepting password
All of a suddent my imessages and facetime arent working? Says its waiting for authorization. I keep putting in password and it isnt accepting it?
If you deleted your BBID then you will never be able to log in on the device until you do a security wipe. You can only log in with the same BBID and if you deleted it and recreated it, it's a new BBID.
http://www.blackberry.com/btsc/KB33591
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Similar Messages
-
could router WiFi be defective if it will not accept your password saying it is incorrect it is 2 yrs old.
The router could be defective but if you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is with your network. Try restarting your router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured. -
My new 5s phone is not accepting my passcode.
my new 5s phone is not accepting my passcode. I cannot access anything. The phone is brand new, the code worked in the store. But it needed to finish downloading my info from the icloud at home with my wifi, but then it wouldn't let me in. Help!
Hi blombo,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are having issues with the passcode used to unlock your iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
On the other hand, if you are able to unlock your iPhone (or don't have it set to lock) and are instead talking about your Apple ID (the account used for things like iCloud or the iTunes/App Store), then this article may be more useful:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden -
I cannot update apps iphone will not accept password
I have a apple id and when I try to update apps on iphone it will not accept password keep asking to reset it same problem with icloud cannot log in will not accept pw I tried creating a new id but same problem
What happens when trying to update via iTunes on the computer?
-
i updated my iphone 3g to ios4.2.1 ... the update was succesful but nw itunes says that sim card inserted in this phone is not acceptable and also states that on;y compatible sim from supported carrier is acceptable !!! kindly suggest ...
horsie10 wrote:
i bought my iphone in USA and im using it in india .... kindly hellp me how can i resolve this problem !!!
It has NEVER been possible to purchase an unlocked iPhone 3G in the US. Your phone was hacked. Updating it has re-locked it to AT&T. AT&T will NOT unlock iPhones for any reason.
The phone is now useless to you. There is no legitimate way to fix this. Buy a new phone. Preferably in India. -
In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help me to unlock the screen and switch off voice over
Thanks a lot Sted !! It worked
-
i purchased my IPHONE 4S in canada particularly in Vancouver. i live in italy.
my device displays "ACTIVATION REQUIRED". i also inserted my SIM card but my phone does not accept it. what shall i do?
thank you and regards,
roger
<E-mail Edited by Host>You're phone is locked to a carrier. You will need to contact the carrier you got you're phone from to have them unlock it.
-
When i try to open a document, adobe will not accept password
cannot open file because adobe will not accept password adobe x
Odd. I downloaded [DH]RQ-7_UAV_US_Army.pdf which indicates the password you posted, and it opened WITHOUT any prompt for password at all. (Adobe Reader XI Mac OS X 10.8.5)
I downloaded P51D_Mustang_Ferocious_Frankie.pdf and it opens in Preview, Acrobat X, but not Reader XI as you described.
Here's what I did to get it to open.
Open the PDF in Acrobat.
Click File>Properties.
Under the Security tab, click "Change Settings..."
Where it says "Compatibility:" change it from "Acrobat 5 and later" to "Acrobat X and later".
Enter the password (paper-replika.com) below.
Click OK.
Save the PDF.
Open it with Reader XI.
It will accept the password and open the PDF.
This ISN'T a Reader issue, but an issue with the save settings when the PDF was created.
Unfortunately, for those who DON'T have Acrobat to make the necessary changes, it will remain a problem.
Perhaps you could contct the website and inform them that they need to change their compatibiliy settings in their PDFs.
But... It's NOT a Reader issue. -
HT1222 internet connection netgear will not accept password
internet connection netgear will not accept password
I have this problem too I connect asks for password and type it in nothing happens no message saying its incorrect or unable to join I click it again and click join network it falls down for a second and does the same thing and yes my ipad is up to date
-
App Store Not Accepting Password
App Store Not Accepting Password. I have valid credit card. This is for updates
Hi , I have the same problem . I can login and purchase from iTunes , I can view my account details when I log in via the app store . However I have two updates waiting and everytime I attempt to download them I get the sign in prompt followed by " we could not complete " error 100 or 1004 . I have reset my password and it is accepted for everything but updates . Any help would be appreciated .
-
Secured wi fi network gives timeout and will not accept password. Works on i pad and iphone
My Macbook Pro network was secured and worked on ipad and iphone. Now it gives me a "connection timed out" message on laptop and will not accept password. It works on ipad and iphone. Anyone with an explanation. I cannot get it to let me delete from the macbook pro. Had to set a new unsecured network to just get on internet. Running 10.7.4 and is up to date.
I deleted all and then set up an unsecured network. When I go to system preferences>Network and where the Network Name is, I click join other networks, then click show networks the secured net work is still there and when I click on it, it gives me the timeout message. This is causing a problem in trying to get my wireless printer back on line as it keeps going to this secured network. Can you help with this problem. I would like to remove the secured network completely from my computer. I have gone to the Advanced and deleted all. The only one showing there is the unsecured network.
-
After upgrade to ios6 iPad does not accept password to wifi, I cannot connect to internet. Pls help me...
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
down loaded iso 7 i phone will not connect to router or accept my i tounes password
Agree about the disaster part. I haven't found a fix within iTunes.
I gave up and switched to downcast 2 days ago. Even though it was a hassle to re-subscribe to all my podcasts, im so much happier.
To make switching easier, I found that in iTunes you can "get info" on the podcast and copy the RSS address to the clipboard. Put all of these in a message note. When iCloud syncs the note to your phone, you can copy and paste the urls into downcast one at a time to subscribe.
Downcast has crashed on me occassionally when I'm subscribing to feeds, but so far it has recovered gracefully each time and no data was lost. -
New IO6.1 update not accepting password
Anyone have an issue of updating IO6.1 on their iPhone and it no longer accepting password. Help. My mom is long distance and I don't know what to tell her bi thought we had it written in her notes app, but apparently she can't get there.
Thanks for ur suggestionsI am having the exact same issue!! After typing in my password it try's to sign in then a dialog box pops up and says "could not sign in The request timed out.... Help..can't use phone now!
-
Outlook 2013 not accepting password
I've recently tried to reconnect my work email account to Outlook. However, when I try to enter my password (which I'm sure is correct, as I can log onto the account online with the password), Outlook will not accept it.
Any advice as to how I can get this figured out?
Thanks!I've had been dealing with the same issue for three weeks now. For years Outlook worked fine, then one day it asked for the password - and even when providing the correct
password (proven by the fact that the very same password was working on my phone and the web client), still didn't accept it.
Finally, about 10 minutes ago, I fixed it. Before I go back to the binge drinking I’m doing to celebrate, I wanted to share everything I tried and the final solution.
I recommend trying each approach in order – they go from the simple to the increasingly complicated / time consuming. Hopefully one of the approaches will work for you.
My theory is that Windows somehow stored the wrong password somewhere, and kept on overwriting the correct one. I’m just very glad that is working now.
NO LIABILITY IS ASUMED – FOLLOW PROCEDURES AT YOUR OWN RISK. If you’re not a professional, seek professional help.
Here's all I tried:
APPROACH # 1: Delete the Exchange account and try to recreate it
1. I tried this approach in two ways: I deleted the Exchange account from within Outlook and in different attempts, deleted the account from within
the Mail profile from the Mail area of the Control Panel.
2. Try to recreate the account from within Outlook using autoconfigure. Outlook would not let me - it would give me an error ("encrypted connection
not availabe with your server"), then would try to set it up "unencrypted", then it would ask me to go to the Mail setting in the Control Panel
3. When creating the account in the Mail area of the Control Panel, everything would seem to work - all green check marks when creating the account
with autoconfigure.
4. When trying to open Outlook, it would again prompt for the password, and would not recognize the correct password.
5. I did a similar approach doing manual settings. All settings would be correct within the Mail area of the Control Panel, but Outlook would still not accept the password.
APPROACH #2: Delete the Profile and try to recreate it
1. Went into the Mail area of the Control Panel and deleted the profile.
2. In essence followed steps 2 – 5 from above (creating a profile first, then the account). No luck.
APPROACH # 3: Use the profile assistant from my cloud Exchange provider. (Not sure if this a proprietary thing of my Exchange provider Intermedia.net.)
1. Delete profile.
2. Downloaded the "profile assistant" from the "Setup" area of my Intermedia.net account.
3. When trying to run it, it would do something weird (it even stumped the Intermedia.net tech support guy): instead of creating a profile, it would
simply say "password saved" and prompt for the user name and password.
3. Of course, when trying to start Outlook, the password would not be recognized.
APPROACH # 4: Delete stored credentials
1. On the search box, type in “credential” and go to the “Credential Manager” that you will find.
2. Delete all credentials (both “Web” and “Windows”) that appear to have anything to do with Outlook, Exchange or email. (BTW – I tried this several times, going as
far as deleting ALL credentials I could find in my last attempt)
3. Went back and tried approaches 1 through 3, deleting the credentials before each attempt. No luck
APPROACH #5: Uninstalled and reinstall Outlook.
1. Did this, then tried approaches 1 through 4.
2. It didn’t work.
3. Yeah. I know. Still recovering from this one.
APPROACH #6: The registry (I think)
I know Windows stores passwords in the Registry as well. Ib spite of not being really sure what a Registry is, I did a web search and found the mysterious area where subdirectores with cryptic
names (like 124ww244ab-Zs—u) are created and deleted for each app. Looking at the activity there felt like listening to the musings of a BSG Hybrid.
Found the right directory for Outlook. Renamed it by adding “-old” to it.
Did approaches 1 thru 4. No luck.
APPROACH #7: Create a new User Account in my computer (Victory at last)
I wish I had tried this first.
The account in my computer is linked to my Microsoft account. So first, go into your Account and disconnect it from your Windows Account, making it a local account on the PC.
Create a new account with Administrative rights. Connect this account to your Windows account.
I went back to approach 1, but when I saw the same errors, skipped it and went to #3. This worked at last.
I hope this info is useful. Now back to partying.
Maybe you are looking for
-
Xorg fails to start, blackscreen with immovable mouse
Since the last xorg-server update this happened, though I downgraded the package and it didn't fix it.
-
Adobe Air won't install on android device.
Just got a android phone to develop air apps on and guess what, the Adobe Air won't load. The phone (Virgin Mobile Optimus V = Mid-Tex Cellular LGE VM670) was just released. Does Adobe Air have minimum specs that have to be followed? Does the Adobe A
-
I'm using PL/SQL to render a whole host of content in HTML via Oracle Portal. What I'd like to do is display a piece of HTML if the current user is within groups X, Y or Z. So in layman's terms: IF user_group = SLCPortalDeveloper then htp.p('<p>this
-
When I open the website as http://oldc.in then there posting are going out of boxes so please can anyone tell me about fixing this problem? This problem is going only with mozilla firefox.
-
I have worked in flex 3 for a while and I am trying to wrap my head around skins. I see how they work but my question is, how do you configure the skin in the mxml component that is using it? For example: <s:Application xmlns:fx="http://ns.adobe.com/