My phone is not backing up to Icloud, how do I fix this

My phone has recently been saying I needed more I cloud storage so I got some but now it seems to be not backing up.  How do I fix this?

As this article says, your device must be turned on, locked, connected to a power source, and WiFi.
iCloud: iCloud Backup

Similar Messages

  • Content on my phone does not match my itunes. How do I fix this?

    When I sync my Iphone 5s to my itunes on my computer it tells me I have no more storage. It says I have over 800 photos on my phone when actually I have 10! How can I fix my problem?

    what operating system?
    what version of itunes?
    connected by usb or wifi?

  • My phone is not keeping sent e-mails, how do i fix this

    I recently upgraded my Iphone 4 software and since then no emails that i send from any of my accounts are being saved.  Does anyone know how to fix this?  it also decides to change my defult email address daily, again, if anyone can shed some light i'd be most grateful!  thanks,  

    As this article says, your device must be turned on, locked, connected to a power source, and WiFi.
    iCloud: iCloud Backup

  • I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x m

    i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x mas and that is tomorrow

    AdaS_VZW,
    I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
    I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
    What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
    I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
    Shawn

  • Part of my Itunes library is saved in icloud and these songs are on my Ipod. Other songs in my library that aren't saved in Icloud are not on my Ipod. How do I fix this?

    Part of my ITunes library is saved in Icloud and these songs are on my Ipod. Other songs in my library that are not saved in Icloud are not in my Ipod. How do it fix this?

    Hello cherijewell,
    Thanks for using Apple Support Communities.
    To learn more about iTunes in the Cloud please check out the article linked to below.
    iTunes 11 for Windows: iTunes in the Cloud overview
    http://support.apple.com/kb/PH12489
    Take care,
    Alex H.

  • Trying to create itues account for children's school ipad and says does not meet min age.  Tried to go back and fix bday as was put in incorrectly and still says "does not meet min age".  How do I fix this?

    I'm trying to create a new apple account for my daughter's school ipad.  She put in her bday incorrectly and said "does not meet age requirements".  We went back and put in her correct date (over 13) and still says "does not meet age requirement".  How do I fix this??

    The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
    Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
    Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
    Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
    So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

  • When I connect my phone to my mac laptop, iTunes pops ups saying 'could not allocate a resource'. How do I fix this?

    When I connect my phone to my mac laptop, iTunes pops ups saying 'could not allocate a resource'. How do I fix this?

    Temporarily disable any security software on the computer.
    Also check the host file and remove any entries for gs.apple.com.

  • Itunes will not recognize my ipod. How do i fix this?

    Itunes will not recognize my ipod. How do I fix this?

    Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

  • Does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

    does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?

    Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
    If this does not work, you should get it serviced:
    Apple - Support - Service Answer Center
    How to back up your data and set up as a new device

  • HT201077 I accidentally grabed my My Photo Stream from My Pictures & transfered it to a FOB. Now I can't view any of the pictures from my phone & I cant up load any. How do I fix this?

    I accidentally grabed my My Photo Stream from My Pictures & transfered it to a FOB. I put it back as soon as I realized. Now I can't view any of the pictures from my phone & I cant up load any. How do I fix this?

    Thanks, Eric. I'm not sure what I should be checking using your suggestion--as I said, I'm an utter novice with the iMac. However,  I saw a reference to problems with the Library entries, so I checked mine and the iWork files were missing, something confirmed when I checked the crash log. In desperation, I did another software update, and that seems to have fixed the problem completely. Now wondering if I dare upgrade to Lion!

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

    Skipping songs
    The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
    If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
    Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
    Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
    tt2

  • I have a really old Itunes account.  I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year.  How can I fix this?

    I have a really old Itunes account.  I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year.  How can I fix this?  I have about 70 downloaded songs on this log in that I would like to get back.
    Thank you in advance.

    Contact iTunes customer support.

  • No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?

    No matter what wi-fi I'm connected to or browser I'm using, webpages take forever to load or they never load at all. Other computers do not have any problems. How can i fix this?
    I've tried safari, chrome, firefox...I've cleared the cache as well. This has been going on for several months and used to be tolerable as it was not every website. Now it has become every website and is impossible to deal with. My roommates computer and my cell phone connect fine. I'm fully connected to the router yet websites don't load. I'm using 10.7.5. Thank you!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can't open a file,just goes to a blank screen then back to desk top, how do I fix this?

    Can't open a file,just goes to a blank screen then back to desk top, how do I fix this?

    What system?
    What version of PageMaker?
    Can you open the PageMaker app ok?
    If so, what happens if you then use File > Open? (Not double click)

Maybe you are looking for

  • RFC Sender to start Sync/Async Bridge

    Hi, I'm trying to start a Sync/Async Bridge calling RFC. When importing RFC into Integration Repository, by default it creates two Message Type for request and response (RFCNAME and RFCNAME.response). My scenario is configured as follows: <b><u>Integ

  • Selecting all columns makes oracle use more indexes than only selectng one?

    I have 3 queries here that differ only slightly, conceptually, but the plans are massively different. What I cant work out is that the difference is only in the select list.. The fields referenced in the where clause are properly indexed for this pur

  • EWA report is not displayed in solution_manager

    Hello Gurus, in our SolMan 701.06 / ST 400-24(SAPKITL434) we had the following error at showing EWA in tac solution_manager. Error: &EA1000000007291&: attribute not found: &TEXTPARAM& &check_244_comment&, Programm SAPLDSVAS_PROC, Include LDSVAS_PROCE

  • Update attribute on document creation

    I'm trying to modify the name of a created document. In my S_TieDocument class, I use the ExtendedPreInsert method to do this but can't get it to work. Here's the code I use: in S_TieDocument: public void extendedPreInsert(OperationState opState, S_L

  • Debug & run a console application on xcode

    I'd like to run and debug a group of console applications. I got the source code from the Internet, and I can build it successfully. However, the debug aptions are all disabled, as the Run option in Product. I think that's because I couldn't set the