My phone is not working after i tried to update it to IOS 8!

Hello everyone, i hope that you can help me with my problem!
Yesterday i tried to update my Iphone 5s to ios 8 via itunes on my mac. After a while it displayed that there was an error an it stopped. After that i tried to open my phone and it was in recovery mood! i couldn't get out of the recovery mode so i searched my problem online and it said that i have to download a program called Recboot. I did and it had two optiond either to exit or enter the recovery mode and i pressed exit of course but then it started to show the apple logo then it flashes a blue screen then goes off then the apple screen again and everything goes in a loop and never stopes until i completely close the phone! now my laptob can't even identify the phone, so i can't even recover it or restore it and i don't know what to do! Please HELP me, i'm desperate

I had the same problem, I connected to a different computer that had itunes. It also was oneI never connected to before. I held the power botton and homebutton till it showed up connect to itunes. I opened up it tunes and it said my phone needed a phone software update, i folled the prompt and set it up as a new phone. Then i resored it, then put it on the computer u usually sync it on and restore it to a date the phone was working to, this helped me, if u want i can help u over the phone if u cant get it, let me know and i will send u my number over my email address, hope it works, basically i swiped the phone clean and reinstalled all software by taking these steps

Similar Messages

My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6

My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6. The screen is black and it doesn't work.

Downgrading the iOS is not supported by Apple.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone4 is not working after I tried to update it and it wont let me restore it?

My husbands iphone 4 is refusing to restore or really do anything since he tried to update it to the new operating system. It just alternates between the apple sign, and the thinking circle. I updated mine on the computer right before he tried so we know its not the computer settings. I updated itunes and went through the trouble shooting guides. It was not connecting with itunes at all so I updated the device connector. Now it will connect sometimes as an unknown iphone but will not let me restore it and says it is a (-1) error. What should I do? Apple support was supposed to call an hour ago and still hasnt called.

I had the same problem, I connected to a different computer that had itunes. It also was oneI never connected to before. I held the power botton and homebutton till it showed up connect to itunes. I opened up it tunes and it said my phone needed a phone software update, i folled the prompt and set it up as a new phone. Then i resored it, then put it on the computer u usually sync it on and restore it to a date the phone was working to, this helped me, if u want i can help u over the phone if u cant get it, let me know and i will send u my number over my email address, hope it works, basically i swiped the phone clean and reinstalled all software by taking these steps

My itunes not working after it tried to download the new version. it keep giving error 7

my Itunes not working after it tried to download the new version. it give me message: erro 7 or window error 193. need help. thank

What worked for me was to uninstall from the control panel in this order: Thanks to another post on this board... this worked... link to the discussion here: https://discussions.apple.com/thread/5817584?tstart=0
ITunes
Apple Software Update
Apple Mobile Support
Bonjour
Apple Application Support
I had problems uninstalling Apple Mobile Support, I had to repair it first before I could uninstall it. You will have to restart the computer after all the uninstalls, and before reinstalling ITunes. I reinstalled ITunes from the Apple website afterwards (fresh download) ... everything works for me now that I have done this.

HT201436 Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me

Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?

When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.

My phone is not working the way it did before the manditory iOS 7 update.

My phone is not working the way it did before the manditory iOS 7 update. It freezes, it lags, I get kicked out of my apps, my messages do not send half of the time, I can't view the pictures in my camera roll if I enlarge them, and the phone glitches randomly. How can this be fixed or what do I need to do to get it replaced??

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Illustrator tools dropdown is not working after the recent software update

My Illustrator tools dropdown is not working after the recent software update. Any help would much appreciate.

Same problem here. I have a Mac with a recent Yosemite update.

Home button not working after 5.0.1 update

Ok now the home button not working after 5.0.1 update. Anyone have any ideas? How do I roll backfrom this update?

This happened to me as well. AT&T had me reset my network settings and this fixed the problem. Here is how...
Settings > General > Reset > Reset Network Settings
"For now" the problem is fixed for me.

HT1222 I can updat my ph ios7. Bt it has some prob, Like wifi or hotspot. Now i want to update it again, bt its not working. I want 2 update ios7 and ios 7.0.2.

I can updat my ph ios7. Bt it has some prob, Like wifi or hotspot. Now i want to update it again, bt its not working. I want 2 update ios7 and ios 7.0.2.

Okay, so update it.
Frankly no one can offer assistance if no details about the problem are provided.

External monitor Syncmaster 2494SW not working after 10.6.7 update

External monitor Samsung Syncmaster 2494 SW stopped working after 10.6.7 update on 2011 MacBook Pro. I'm using miniDP-DVI adapter. The monitor shown correctly in Display Properties with right modes and name. MackBook recognizes connection but the monitor goes to PowerSave mode (LED indicator blinks).
Safemode boot, SMC reset, PRAM reset did not help.
Exactly the same setup works perfectly under 10.6.6.

HERE IS THE EASY FIX SOLUTION FOR THIS PROBLEM GUYS:
I have an 15inch MacBook Pro that I've just installed Snow Leopard 10.6.3 on.
Prior to this install, I've had it hooked up to my Samsung SyncMaster 2243 via an Apple MDP/VGA adapter and a third party VGA cable. It has been flashing on and off a black screen every now and then for the past 2 years and I googled that it was just a crappy communication between the MBP and the Samsung... but now since installing 10.6.3, the Samsung display just flashes the desktop for a second then turns black for good - occationally flashing analogue/digtal prompt display. Tried everything for hours. Nothing worked, thought I was gonna have to buy a new all Apple VGA lead then came across Michael's above solution. Tried it and it worked IMMEDIATLY!!! And the monitor doesn't flash black anymore AT ALL!! Whoo-hoo!! Thanks heaps.
WHAT TO DO TO FIX:
Go to => System Preferences => Energy Saver => change graphic settings to Higher Performace.
Cheers!!

IPod touch not working after 5.0.1iOS update

It seems like a lot of people are having issues after the new 5.0.1iOS update. I want to share my frustration and what problems I'm facing. After the update my ipod won't sync properly. It freezes my computer and then my computer shuts down everytime I have my ipod connected to my computer. My music and apps on my iPod are like ghosts they are visible but do NOT work after being pressed. I tried resetting the ipod, same problem. I uninstalled and reinstalled iTunes, same problem. There is only problems with my computer when the iPod is plugged into the computer and trying to update. I am so ANGRY because I love my iPod and I can't use it to listen to music or communicate with my family and friends. I hope Apple will help all of us soon and fix these HUGE bugs, and FAST.

Have you tried the sandard fixes:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Retore from backup
- Restore to factory defaults/new iPod.

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

Trackpad not working after 10.8.4 update

Macbook Pro with Retina Display late 2012. Trackpad clicking function stopped working after 10.8.4 update. Any advice? I've tried zapping the pram, resetting the smc. Nothing helps.

Apple store genius bar appointment is the best option for a positive resolution.
Ciao.

My iphone is not activated after i tried to update the os?why?it is showing error?1602

my iphone is not responding
i just tried to update it from os 4.1 to 4.2

Try this support document http://support.apple.com/kb/ts1275. It states that error 1602 is generally a USB problem. Try an alternative USB port, or use one on the back of the computer rather than a hub.

My phone is not working after updating to OS 4.3

Hi there. I'm running Windows 7 Ultimate 64-bit.
I have the latest version of iTunes which I downloaded today before updating my phone.
So I updated my iPhone 4 from 4.2.# OS to 4.3 OS as iTunes recommended me to.
Everything was going fine, but as the phone was rebooting from the update. I see the Apple logo load screen and then it only shows the screen with the circle iTunes logo, with that white arrow pointing towards the logo, with the USB connection on the screen.
I've tried rebooting my computer, trying different USB ports. Nothing works.
My computer makes that noise when you connect something to the USB port and it even says new device installed properly, but nothing is showing on my computer and nothing is showing on iTunes.
What could be the problem? I can't even restore the phone in DFU mode as iTunes doesn't pick anything up.

did you really get the phone into the dfu mode? The phone must be off to get it into this mode. So just switch off normally if possible. Then hold down the home button and connect to the usb cable and don't release the button until the "Connect to itunes" symbol appears on the screen. You should then be able to restore your phone. In case you cant switch off the phone try the following first (resetting and turning off)
Hold the sleep/reset + home button until the "apple" appears twice and the screen goes black. Make sure the phone does not reboot ! If it reboots try again

My phone is not working after i tried to update it to IOS 8!

Similar Messages

Maybe you are looking for