My phone is playing lark sounds, but not music or video sound
I Keep getting a message that says my iPhone 'may not connect to this headphone', when no headphones are plugged in.
Meant to type alarm sounds
Similar Messages
-
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
ITunes does only sync photo's but not music and video. Help please
I have loaded ios5 on both my iPad and my iPhone4. For about a week, all worked fine and i restored my music, video's and photo's. However since about a week, music and viceo's are removed from the iPhone. That was after the change from summer- to winter-time. And iTunes does not want to sync them back to the phone. On my iPad all is still there. I looked at my settings and the only difference between the iPad and the iPhone is that on the iPhone i see a switch for iTunes Match, but that does not work in my country yet. When i look in the left column of iTunes i see my music marked under the musicdirectory of my iPhone, but with a sych mark. ( the little circle). So i can add and remove photo's, but not music or video items. Has anyone an idea what to do?
By the way, all my other stuff(agenda, notes etc.) are synched thru iCloud.Are you viewing on 'Videos' or did you find it in your music list?
-
I've tried everything I can think of to get my Iphone 4S to play albums like an Ipod does. All it ever does is play the songs but not the albums in alphabetical order. I used to think I was reasonably intelligent until I butted heads with this phone.
Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.
-
Sound works (songs) on Ipad 2 but sound on videos (example utube) sound does not work. Video plays with no issue.Mute us not checked in general settings. Reboot (off/on) has not helped. Deleted apps and reloaded them. Did not help. Any other suggestions thank you
If you lose sound for games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
Firefox Browser Outlook SkyDrive playing m4v file with sound but not video
Firefox Browser Outlook SkyDrive playing the m4v file. I have sound but not the video. Sound and video play ok with IE10.
I'm amazed that each time these type of problems arise we get the same advice time-and-again to go through this exceedingly manual process of due-diligence checks-and-balances to figure out what it is that we have as ad-ons that supposedly now clash with changes that FF have made to the browser.
Everything is provided to FF with the post yet we are expected to check in SafeMode everything that was passed compatible when FF was updated.
It all comes across a bit lazy I have to say - no disrespect intended to some at FF who will no doubt come back to "slap my wrist", telling me not to be "rude", "refrain from using so many ????? together", telling me yet again "the problem is with your plugins" - especially when history shows us that such checks I'm asked to make "after the event" often do not resolve the problem, more so given that the last FF Update validated all of them, switch off those that weren't and checks on them since show that all are the latest up-to-date without any changes being made to them by me . Then the problem gets resolved by someone else on the forum basically beta testing what should have been checked-out thoroughly by FF in the first place.
Sorry to go on a bit of a rant-and-rage B-U-T we are not getting these repeated problems withe other browsers which we are getting more and more frequently with FF.
Never mind. I'll go through this rigmarole of checks yet AGAIN, no doubt then having to put up with the same sequence of threads from the likes of Morbus re the Plugin-container fiasco "Nothing to do with this [whatever we put forward it might be]. Try flash [or this or that or something else]. Uninstall it and reinstall it. Make sure it's up to date too.", like we're a bunch of morans who don't have the dummy sense to check these things out thoroughly before we go asking for help on the FF Forum.
"Let's blame the add-ons that have nothing to do with FF" Nowt has changed on that front since 08/2010.
Still, what can we really expect from a free browser? A browser that works?????
I hate IE --- but at least it isn't failling over with hardware acceleration issues every few updates!!!!! -
Sound through hdmi to my tv works but not when watching video online like 4OD
the sound through hdmi to my tv works with music and videos I have downloaded, but not when watching video online like 4OD and youtube.
How can I get it to work?Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!
-
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
[Amixer] Invalid Argument - Sound but not levels
\o/
I recently bought a USB Headset. I'm using ALSA without Pulseaudio. The sound is working fine, but I have a problem setting levels etc.
When I open amixer and the default card is set to the headset, the mixer fails to load with
amixer: Mixer default load error: Invalid argument
I have read the whole internets about this. The usb-snd kernel module is loaded properly.
Some intel users have fixed their issue with using mode=generic. But if i'm correct this will disable 7.1 playback ability.
This is the output from
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Headset [SteelSeries SC2 USB Headset], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
And here is my ALSA Information script output:
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.63
!!Script ran on: Fri May 9 09:08:07 UTC 2014
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: Acer
Product Name: Aspire 5755
Product Version: V1.18
Firmware Version: V1.18
!!Kernel Information
Kernel release: 3.14.1-1-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.14.1-1-ARCH
Library version: 1.0.27.2
Utilities version: 1.0.27.2
!!Loaded ALSA modules
snd_hda_intel
snd_usb_audio
!!Sound Servers on this system
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xc0700000 irq 47
1 [Headset ]: USB-Audio - SteelSeries SC2 USB Headset
SteelSeries SteelSeries SC2 USB Headset at usb-0000:00:1d.0-1.2, full speed
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:1c20 (rev 04)
Subsystem: 1025:0504
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!Module: snd_usb_audio
autoclock : Y
device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
ignore_ctl_error : N
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC269VB
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0269
Subsystem Id: 0x10250504
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC269VB Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC269VB Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x13 0x13]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Internal Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Internal Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c 0x0d*
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x03a19820: [Jack] Mic at Ext Left
Conn = 1/8, Color = Pink
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x0d
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x99a30930: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=25
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0321101f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Connection: 2
0x0c* 0x0d
Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel CougarPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862805
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!USB Mixer information
--startcollapse--
USB Mixer: usb_id=0x10381216, ctrlif=0, ctlerr=0
Card: SteelSeries SteelSeries SC2 USB Headset at usb-0000:00:1d.0-1.2, full speed
Unit: 2
Control: name="Headphone Playback Volume", index=0
Info: id=2, control=2, cmask=0xff, channels=8, type="S16"
Volume: min=-18944, max=0, dBmin=-7400, dBmax=0
Unit: 2
Control: name="Headphone Playback Switch", index=0
Info: id=2, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 6
Control: name="Mic Capture Volume", index=0
Info: id=6, control=2, cmask=0x3, channels=2, type="S16"
Volume: min=-18944, max=0, dBmin=-7400, dBmax=0
Unit: 6
Control: name="Mic Capture Switch", index=0
Info: id=6, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 9
Control: name="Sidetone Playback Volume", index=0
Info: id=9, control=2, cmask=0x0, channels=1, type="S16"
Volume: min=-18944, max=-4608, dBmin=-7400, dBmax=-1800
Unit: 9
Control: name="Sidetone Playback Switch", index=0
Info: id=9, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 10
Control: name="PCM Volume", index=4
Info: id=10, control=9, cmask=0x40, channels=1, type="S16"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 10
Control: name="PCM Volume", index=3
Info: id=10, control=8, cmask=0x80, channels=1, type="S16"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 10
Control: name="PCM Volume", index=2
Info: id=10, control=5, cmask=0x80, channels=1, type="S16"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 10
Control: name="PCM Volume", index=1
Info: id=10, control=4, cmask=0x20, channels=1, type="S16"
Volume: min=0, max=1, dBmin=0, dBmax=0
Unit: 10
Control: name="PCM Volume", index=0
Info: id=10, control=3, cmask=0x90, channels=2, type="S16"
Volume: min=0, max=1, dBmin=0, dBmax=0
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 7 May 8 10:30 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 10 May 9 07:29 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 6 May 8 10:30 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 5 May 8 10:30 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 4 May 8 10:30 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 3 May 8 10:46 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 2 May 8 10:30 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 9 May 9 07:29 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116, 8 May 9 08:45 /dev/snd/pcmC1D0p
crw-rw----+ 1 root audio 116, 1 May 8 10:30 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 May 8 10:30 /dev/snd/timer
/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root 60 May 9 07:29 .
drwxr-xr-x 4 root root 300 May 9 07:29 ..
lrwxrwxrwx 1 root root 12 May 9 07:29 usb-SteelSeries_SteelSeries_SC2_USB_Headset_000000000000-00 -> ../controlC1
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 May 9 07:29 .
drwxr-xr-x 4 root root 300 May 9 07:29 ..
lrwxrwxrwx 1 root root 12 May 8 10:30 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 May 9 07:29 pci-0000:00:1d.0-usb-0:1.2:1.0 -> ../controlC1
!!ALSA configuration files
!!User specific config file (~/.asoundrc)
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/mastermind/.asoundrc.asoundconf>
pcm.!default {
type hw
card 1
ctl.!default {
type hw
card 1
!!asoundconf-generated config file
# ALSA library configuration file managed by asoundconf(1).
# MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN!
# Manual changes to the ALSA library configuration should be implemented
# by editing the ~/.asoundrc file, not by editing this file.
!defaults.pcm.card Headset
defaults.ctl.card Headset
defaults.pcm.device 0
defaults.pcm.subdevice -1
defaults.pcm.nonblock 1
defaults.pcm.compat 0
defaults.pcm.minperiodtime 5000
defaults.pcm.ipc_key 5678293
defaults.pcm.ipc_gid audio
defaults.pcm.ipc_perm 0660
defaults.pcm.dmix.max_periods 0
defaults.pcm.dmix.rate 48000
defaults.pcm.dmix.format "unchanged"
defaults.pcm.dmix.card defaults.pcm.card
defaults.pcm.dmix.device defaults.pcm.device
defaults.pcm.dsnoop.card defaults.pcm.card
defaults.pcm.dsnoop.device defaults.pcm.device
defaults.pcm.front.card defaults.pcm.card
defaults.pcm.front.device defaults.pcm.device
defaults.pcm.rear.card defaults.pcm.card
defaults.pcm.rear.device defaults.pcm.device
defaults.pcm.center_lfe.card defaults.pcm.card
defaults.pcm.center_lfe.device defaults.pcm.device
defaults.pcm.side.card defaults.pcm.card
defaults.pcm.side.device defaults.pcm.device
defaults.pcm.surround40.card defaults.pcm.card
defaults.pcm.surround40.device defaults.pcm.device
defaults.pcm.surround41.card defaults.pcm.card
defaults.pcm.surround41.device defaults.pcm.device
defaults.pcm.surround50.card defaults.pcm.card
defaults.pcm.surround50.device defaults.pcm.device
defaults.pcm.surround51.card defaults.pcm.card
defaults.pcm.surround51.device defaults.pcm.device
defaults.pcm.surround71.card defaults.pcm.card
defaults.pcm.surround71.device defaults.pcm.device
defaults.pcm.iec958.card defaults.pcm.card
defaults.pcm.iec958.device defaults.pcm.device
defaults.pcm.modem.card defaults.pcm.card
defaults.pcm.modem.device defaults.pcm.device
defaults.pcm.file_format "raw"
defaults.pcm.file_truncate true
defaults.rawmidi.card 0
defaults.rawmidi.device 0
defaults.rawmidi.subdevice -1
defaults.hwdep.card 0
defaults.hwdep.device 0
defaults.timer.class 2
defaults.timer.sclass 0
defaults.timer.card 0
defaults.timer.device 0
defaults.timer.subdevice 0
defaults.namehint.showall off
defaults.namehint.basic on
defaults.namehint.extended off
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Headset [SteelSeries SC2 USB Headset], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Headset [SteelSeries SC2 USB Headset], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xc0700000 irq 47'
Mixer name : 'Intel CougarPoint HDMI'
Components : 'HDA:10ec0269,10250504,00100100 HDA:80862805,80860101,00100000'
Controls : 32
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 0 [0%] [-65.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 250 [98%] [-1.00dB]
Front Right: Playback 250 [98%] [-1.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 19 [61%] [12.00dB] [on]
Front Right: Capture 19 [61%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!-------Mixer controls for card 1 [Headset]
amixer: Mixer load hw:1 error: Invalid argument
Card hw:1 'Headset'/'SteelSeries SteelSeries SC2 USB Headset at usb-0000:00:1d.0-1.2, full speed'
Mixer name : 'USB Mixer'
Components : 'USB1038:1216'
Controls : 13
amixer: Mixer hw:1 load error: Invalid argument
!!Alsactl output
--startcollapse--
--endcollapse--
!!All Loaded Modules
Module
fuse
hid_generic
snd_usb_audio
usbhid
snd_usbmidi_lib
hid
snd_rawmidi
snd_seq_device
ctr
ccm
mousedev
arc4
ath9k
ath9k_common
ath9k_hw
ath
mac80211
cfg80211
tg3
ptp
pps_core
libphy
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
iTCO_wdt
iTCO_vendor_support
joydev
acer_wmi
sparse_keymap
rfkill
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
microcode
psmouse
snd_hda_intel
i915
snd_hda_codec
snd_hwdep
snd_pcm
evdev
mac_hid
snd_timer
coretemp
drm_kms_helper
snd
hwmon
pcspkr
serio_raw
drm
i2c_i801
shpchp
soundcore
intel_gtt
mei_me
lpc_ich
i2c_algo_bit
mei
i2c_core
battery
ac
wmi
button
video
processor
vboxnetflt
vboxnetadp
vboxdrv
ext4
crc16
mbcache
jbd2
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_common
atkbd
libps2
ahci
libahci
libata
scsi_mod
xhci_hcd
ehci_pci
sdhci_pci
ehci_hcd
sdhci
led_class
mmc_core
usbcore
usb_common
i8042
serio
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x14 0x99130110
0x17 0x411111f0
0x18 0x03a19820
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x99a30930
0x1d 0x598301f0
0x1e 0x411111f0
0x21 0x0321101f
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560010
0x06 0x58560020
0x07 0x58560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:
!!ALSA/HDA dmesg
[ 2.804467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.804893] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 2.809383] [drm] Memory usable by graphics device = 2048M
[ 2.809500] Console: switching to colour dummy device 80x25
[ 2.822857] hda_codec: ALC269VB: SKU not ready 0x598301f0
[ 2.825609] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 2.837175] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.837341] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.837432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.875879] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 12.378034] 3:2:3: cannot get freq at ep 0x1
[ 12.415236] usbcore: registered new interface driver snd-usb-audio
[ 12.574045] usb 4-1.4.1: new full-speed USB device number 5 using ehci-pci
[21894.981516] tg3 0000:02:00.0: System wakeup disabled by ACPI
[21894.981666] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[21894.982611] ath: phy0: ASPM enabled: 0x42
A frickload of kudos to anybody that will either be able to recommend an alternative mixer (without having to install OSS/Pulse) or be able to link or recommend a fix.
Kind regards,
MastermindSo I just spent another couple of hours battling with alsa.
I went from sound but no mixer, to no sound at all. And then back to having sound again after 4 hours of command mashing. All that after just a weekend in suspend/standby.
The only difference I could detect was that the subdevice on the card changed, but simply defining (and alsa restoring) that one in the ~/.asoundrc did not do the trick.
I also came across a more detailed error with the crashing alsamixer.
/usr/share/alsa/init/default:171: value write error: Invalid argument
/usr/share/alsa/init/default:185: value write error: Invalid argument
Commenting these lines did not fix the error.
Some more outputs:
[root@Blitz mastermind]# alsactl restore
No state is present for card Headset
Found hardware: "USB-Audio" "USB Mixer" "USB1038:1216" "" ""
Hardware is initialized using a generic method
/usr/share/alsa/init/default:171: value write error: Invalid argument
/usr/share/alsa/init/default:185: value write error: Invalid argument
No state is present for card Headset
systemctl -l status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Thu 2014-05-08 10:30:47 UTC; 3 days ago
Process: 192 ExecStart=/usr/bin/alsactl restore (code=exited, status=19)
Main PID: 192 (code=exited, status=19)
May 08 10:30:47 Blitz alsactl[192]: /usr/bin/alsactl: load_state:1729: No soundcards found...
$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VB Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VB Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
sysdefault:CARD=Headset
SteelSeries SC2 USB Headset, USB Audio
Default Audio Device
front:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
Front speakers
surround40:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Headset,DEV=0
SteelSeries SC2 USB Headset, USB Audio
IEC958 (S/PDIF) Digital Audio Output
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Headset [SteelSeries SC2 USB Headset], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
This is what I have in /etc/modprobe.d/alsa.conf :
options snd-hda-intel model=generic
options snd-usb-audio model=generic
.asoundrc for root
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</root/.asoundrc.asoundconf>
audio_output {
type "alsa"
name "My ALSA Device"
card 1
# device "hw:1,1" # optional
mixer_control "mpd" # optional
pcm.!default {
type hw
card 1
ctl.!default {
type hw
card 1
for my user:
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/mastermind/.asoundrc.asoundconf>
pcm.!default {
type hw
card 1
ctl.!default {
type hw
card 1
More:
ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 May 12 10:25 by-id
drwxr-xr-x 2 root root 80 May 12 10:25 by-path
crw-rw----+ 1 root audio 116, 7 May 8 10:30 controlC0
crw-rw----+ 1 root audio 116, 10 May 12 10:25 controlC1
crw-rw----+ 1 root audio 116, 6 May 8 10:30 hwC0D0
crw-rw----+ 1 root audio 116, 5 May 8 10:30 hwC0D3
crw-rw----+ 1 root audio 116, 4 May 8 10:30 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 May 8 10:46 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 May 8 10:30 pcmC0D3p
crw-rw----+ 1 root audio 116, 9 May 12 10:25 pcmC1D0c
crw-rw----+ 1 root audio 116, 8 May 12 10:25 pcmC1D0p
crw-rw----+ 1 root audio 116, 1 May 8 10:30 seq
crw-rw----+ 1 root audio 116, 33 May 8 10:30 timer
lsmod | grep '^snd' | column -t
snd_usb_audio 118323 2
snd_usbmidi_lib 19756 1 snd_usb_audio
snd_rawmidi 18742 1 snd_usbmidi_lib
snd_seq_device 5180 1 snd_rawmidi
snd_hda_codec_hdmi 36588 1
snd_hda_codec_realtek 46566 1
snd_hda_codec_generic 53211 1 snd_hda_codec_realtek
snd_hda_intel 37704 0
snd_hda_codec 99871 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
snd_pcm 79815 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_timer 18718 1 snd_pcm
snd 59286 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
restore alsa:
alsactl restore
No state is present for card Headset
Found hardware: "USB-Audio" "USB Mixer" "USB1038:1216" "" ""
Hardware is initialized using a generic method
/usr/share/alsa/init/default:171: value write error: Invalid argument
/usr/share/alsa/init/default:185: value write error: Invalid argument
No state is present for card Headset
# cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xc0700000 irq 47
1 [Headset ]: USB-Audio - SteelSeries SC2 USB Headset
SteelSeries SteelSeries SC2 USB Headset at usb-0000:00:1d.0-1.2, full speed
# cat /proc/asound/modules
0 snd_hda_intel
1 snd_usb_audio
Let me know if I can provide any more information.
Last edited by Mastermind (2014-05-12 09:54:11) -
How can I move movies from my computer to my iPad? They will play in quicktime but not iTunes
How can I move movies from my computer to my iPad? They will play with quicktime but not iTunes so I can't sync them
Th AVPlayerHD works well for playing other video types. You can transfer the videos via USB in the app tab in iTunes on your computer. When you open that tab when you have you iPad connected to the computer scroll down and you will see apps listed on the left and a blank on the right. Click on the app and then click on the add button under the blank window on the right. Then navigate to the video you want to play and it will transfer it to the iPad. I have about 14 movies on mine using AVPlayerHD. works very well. Also have VLC player (before it was yanked from the app store). Works about the same.
You can also get the app Air Video and stream the video to from your computer to the iPad, and even have Theo ad connected to the tv to watch on there. I do that all the time with my iPhone. Saves time with not having to sync movies all the time. -
I am trying to save a mp3 file but firefox does not allow me to save it...it allows me to play the file but not download and asave it to my computer. How do I enable Firefox to save mp3 files on my computer?
Go to Options>Applications tab > search MPEG Layer 3 audio(audio/mpeg) > use "Save File" option on drop down menu.
-
ITunes purchased song plays in iTunes but not on iPod
I have purchased several songs from the music store. One of the songs will play in iTunes but not on my iPod. I've removed the song several times from the iPod and resynced with iTunes, but the song still cuts out in the middle of the song. What should I do?
If it's just a problem with that song, I would contact the customer service who may authorize another download.
http://www.apple.com/support/itunes/store/download/#form -
Music video plays in itunes but not on ipod
hi
like my subject line states, i transferred a whole bunch of music videos off of dvd into mp4 format using videora.
they play in itunes but not on my ipod.
i transferred about 400 or so at the same time to ipod do you think that's why most of them won't play ?
should i do it one by one ?
thanks.it's more than just the mp4 format. They need to be encoded correctly with the right dimensions and other attributes as well. I don't bother with this sort of thing right now. If there is anyone who has these specs, just post them here. Otherwise, you can always google them or search these boards for the proper format/size/encoding.
-
What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.
First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem! -
After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not
After using video capture device to copy VHS to DVD, burnt DVD will play on computer but not on DVD player. Tech support for the VCD said my HP DVD burning software has to burn "DVD Video and not DVD data" and to check with HP. How can i check myself.
Grahamster, welcome to the forum.
I recommend trying CDBurnerXP for burning video CD's. I have been using it for years without a glitch. I use it mainly for burning ISO's, but have used it for all types. Please let us know if it works or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
Maybe you are looking for
-
seriously wont work. i hate this. help.
-
Burn fails: "The device failed to respond properly, unable to recover or.."
Hi all, Whenever I try to burn a disc with iTunes (I'm backing up my whole library), I get this error: "The device failed to respond properly, unable to recover or retry." I'm using MBP and the SuperDrive is Matshushuita UJ-857D. Anyone know what's g
-
DMS workflow and signature strategy
Hi Everybody, In one of my scenarios i am working on DMS, to implement signature strategy i created two roles called Manager, Designer. Designer is the predecessor for the Manager. I defined these all things in Signature strategy and they a
-
Flash Player 9 Install Problems on Mac OS X
I just installed the Flash Player 9 on my Power PC based Mac OS X 10.3.9 and now no Flash elements work in Safari 1.3.2, or even Explorer (which I don't use). I have been sure to close all browsers, uninstall first etc. The installations appears to c
-
Why do I have to sign into iTunes (on my Mac) three consecutive times every time I open the app?
Every time I launch iTunes on my Mac, it wants me to sign into my iTunes account. I get three consecutive dialogs asking for my password. The first two seem to be for "automatic downloads" and the third is "to use iTunes Radio". What can I do so that